Given that global navigation satellite system (GNSS)-based real-time kinematic (GNSS-RTK) monitoring accuracy is easily interfered with by residual errors, a combined algorithm is proposed for signal denoising with application to the GNSS-RTK positioning solutions of a super-high-rise building; namely, the Tianjin Radio and Television Tower in China. The proposed denoising algorithm is a combination of the Butterworth high-pass filter and complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), after which the intrinsic mode function components are selected based on the effective coefficient, the correlation coefficient and the power spectral density. After signal filtering, the structural dynamic deformation is 36.0 mm in the horizontal directions and 48.4 mm in the up-direction. Two orders of natural frequencies of the Tianjin Radio and Television Tower are successfully identified (i.e. 0.1583 Hz and 1 Hz). In addition, the relative error of the fundamental frequency is less than 0.44% compared with previous studies. The results reveal the reliability of the combined Butterworth–CEEMDAN algorithms for dealing with GNSS-RTK measurements. Moreover, the improvement in the GNSS-RTK sampling frequency is conducive to extracting more helpful monitoring information. Furthermore, the dynamic deformation data in this paper indicate that the Tianjin Radio and Television Tower is operating normally.
21 January 2023 in KSCE Journal of Civil Engineering
Because the steel structure trestle has been in service under heavy load for a long time, the steel structure trestle is prone to cracks around the welds or bolt holes, which can lead to structural collapse in severe cases. Aiming at the characteristics of stable and high-quality images obtained by the unmanned consumer-grade camera monitoring system, this paper proposed structure health monitoring (SHM) system which is based on consumer-grade camera. The SHM system can identify crack damage and locate steadily in long term, which provides the technical support of practical application in intelligent SHM system. The method first performed edge detection on the trestle structure, followed by pixel-level semantic segmentation and crack localization. Canny edge detection algorithm was used to identify trestle structures in the camera image. The panorama trestle structure was divided into areas of suitable size, and the camera focused on each divided area one by one. Then the improved DeepLab V3+ model was trained by constructing global and local datasets. Then the improved DeepLab V3+ model was used to perform pixel-level semantic segmentation on the trestle images of the divided regions. Finally, based on the Speeded Up Robust Features and combined with the image, a panorama crack location output method was proposed. The system was used to test a section of a trestle in a coal mining industrial park, and the system showed that the method could efficiently and accurately identify and locate the crack damage.