lina Yu

Dr. lina Yu

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2007 in Science and Technology of Welding and Joining
Verified
Journal Article
Closed access
YWY. H. Wei
Y. H. Wei
XZX. H. Zhan
X. H. Zhan
ZDZ. B. Dong
Z. B. Dong
LYlina Yu
lina Yu
A numerical model based on cellular automaton algorithm is developed to simulate dendrite growth at the edge of weld molten pool and the solute diffusion during grain growing process in weld solidification is analysed too. By means of two-dimensional square cells and von Neumann neighbourhood, the growing morphologies of the columnar dendritic grains with different cooling rates and different numbers of seeds are simulated. The growth of secondary dendrite arms, tertiary dendrite arms and their competitive growth are also presented. The results illustrate that the final primary dendrite spacing depends on the number of seeds that initially generated. With increasing cooling rate, the growing speed is increasing obviously. It is also indicated that competitive growth exists between different dendrite arms. The tendency of competitive growth in high cooling rate conditions is weaker than the one in relatively small cooling rate conditions.

3 September 2019 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
CXChun-Bao Xiong
Chun-Bao Xiong
LYlina Yu
lina Yu
YNYan-Bo Niu
Yan-Bo Niu
Fiber-reinforced materials have widespread applications, which prompt the study of the effect of fiber reinforcement. Research studies have indicated that thermal conductivity cannot be considered as a constant, which is closely related to temperature change. Based on those studies, we investigate the fiber-reinforced generalized thermoelasticity problem under thermal stress, with the consideration of the effect of temperature-dependent variable thermal conductivity. The problem is assessed according to the L-S theory. A fiber-reinforced anisotropic half-space is selected as the research model, and a region of its surface is subjected to a transient thermal shock. The time-domain finite element method is applied to analyze the nonlinear problem and derives the governing equations. The nondimensional displacement, stress, and temperature of the material are obtained and illustrated graphically. The numerical results reveal that the variable conductivity significantly influences the distribution of the field quantities under the fiber-reinforced effect. And also, the boundary point of thermal shock is the most affected. The obtained results in this paper can be applied to design the fiber-reinforced anisotropic composites under thermal load to satisfy some particular engineering requirements.

28 March 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CXChunbao Xiong
Chunbao Xiong
LYlina Yu
lina Yu
YNYanbo Niu
Yanbo Niu
Under the action of wind, traffic, and other influences, long-span bridges are prone to large deformation, resulting in instability and even destruction. To investigate the dynamic characteristics of a long-span concrete-filled steel tubular arch bridge, we chose a global navigation satellite systems-real-time kinematic (GNSS-RTK) to monitor its vibration responses under ambient excitation. A novel approach, the use of complete ensemble empirical mode decomposition with adaptive noise combined with wavelet packet (CEEMDAN-WP) is proposed in this study to increase the accuracy of the signal collected by GNSS-RTK. Fast Fourier transform (FFT) and random decrement technique (RDT) were adopted to calculate structural modal parameters. To verify the combined denoising and modal parameter identification methods proposed in this paper, we established the structural finite element model (FEM) for comparison. Through simulation and comparison, we were able to draw the following conclusions. (1) GNSS-RTK can be used to monitor the dynamic response of long-span bridges under ambient excitation; (2) the CEEMDAN-WP is an efficient method used for the noise reduction of GNSS-RTK signals; (3) after signal filtering and noise reduction, structural modal parameters are successfully derived through RDT and illustrated graphically; and (4) the first-order natural frequency identified by field measurement is slightly higher than the FEM in this work, which may have been caused by bridge damage or the inadequate accuracy of the finite element model.

14 November 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CXChunbao Xiong
Chunbao Xiong
LYlina Yu
lina Yu
LZLewen Zhao
Lewen Zhao
Tropospheric delay is one main factor affecting the accuracy of precise point positioning (PPP) ambiguity-float and fixed solutions. Investigations mainly focused on evaluating the contributions of tropospheric corrections to the accuracy and reliability of PPP solutions. The tropospheric corrections generally contained the zenith tropospheric delay (ZTD) and the horizontal gradients estimated from relative positioning or PPP. However, the estimated tropospheric delays can be partly absorbed by the carrier phase residuals if the stochastic model is not well-defined. Therefore, along with the ZTD and horizontal gradients, the carrier phase residuals from PPP backward filter are considered to reconstruct slant tropospheric delay (STD). Based on the proposed STD model, its marginal effects on GPS PPP were investigated. Results indicated that the consideration of carrier phase residuals for STD modeling can improve the three-dimensional accuracy to 0.5 cm/1 cm/1.2 cm in the South/North/Up (N/E/U) components. Then, the effects of internal and external STD corrections on PPP float and fixed solutions were analyzed. Compared to the ZTD + gradients augmentation, STD corrections from the same station could improve the PPP accuracy by 51%/51%/60%; the large improvements were because the multipath error and observation noise were eliminated. In comparison, the improvement was 14%/28%/31% using external STD corrections, which indicated the effects of unmodeled tropospheric errors in the phase residuals. The ambiguity-fixing results indicated that the fixing rate of PPP ambiguity was increased by 30% with STD augmentation. As the BeiDou System (BDS) suffered longer convergence than that of GPS, the benefits of STD modeling to the BDS observations were also validated. Overall, the results validated the performance of STD-augmented PPP, which demonstrated the potential application of high-accuracy troposphere products.

12 August 2021 in Measurement Science and Technology
Verified
Journal Article
Closed access
LYlina Yu
lina Yu
CXChunbao Xiong
Chunbao Xiong
WCwen chen
wen chen
Yang GaoYang Gao
Yang Gao
ZYZuoan Ye
Zuoan Ye
QSQingfa Shi
Qingfa Shi
Given that global navigation satellite system (GNSS)-based real-time kinematic (GNSS-RTK) monitoring accuracy is easily interfered with by residual errors, a combined algorithm is proposed for signal denoising with application to the GNSS-RTK positioning solutions of a super-high-rise building; namely, the Tianjin Radio and Television Tower in China. The proposed denoising algorithm is a combination of the Butterworth high-pass filter and complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), after which the intrinsic mode function components are selected based on the effective coefficient, the correlation coefficient and the power spectral density. After signal filtering, the structural dynamic deformation is 36.0 mm in the horizontal directions and 48.4 mm in the up-direction. Two orders of natural frequencies of the Tianjin Radio and Television Tower are successfully identified (i.e. 0.1583 Hz and 1 Hz). In addition, the relative error of the fundamental frequency is less than 0.44% compared with previous studies. The results reveal the reliability of the combined Butterworth–CEEMDAN algorithms for dealing with GNSS-RTK measurements. Moreover, the improvement in the GNSS-RTK sampling frequency is conducive to extracting more helpful monitoring information. Furthermore, the dynamic deformation data in this paper indicate that the Tianjin Radio and Television Tower is operating normally.

7 October 2020 in Measurement Science and Technology
Verified
Journal Article
Closed access
LYlina Yu
lina Yu
CXChunbao Xiong
Chunbao Xiong
Yang GaoYang Gao
Yang Gao
JZJinsong Zhu
Jinsong Zhu
With the increasing number of long span bridges, real-time, accurate and continuous monitoring of their safety is important at present. This study investigates the combination of a global navigation satellite system (GNSS) and accelerometer for monitoring dynamic and semi-static characteristics of bridge structures. A field experiment was conducted with the integration of a GNSS and accelerometer. Considering the noise interference of GNSS monitoring, performance tests were first conducted in different environments to investigate the noise characteristics. Next, complete ensemble empirical mode decomposition with adaptive noise-wavelet packet (CEEMDAN-WP) algorithm was chosen for denoising, among which a double criterion based on the correlation coefficient and effective coefficient was proposed to sift the intrinsic mode functions. After the noise reduction process, structural dynamic displacements and modal frequencies were successfully extracted from the 50 Hz GNSS real-time kinematic (GNSS-RTK) and accelerometer data, in which the displacements presented a consistent trend and the first natural frequency was the same (i.e. 0.369 Hz). Structural semi-static characteristics were evaluated by using 1 Hz (RTK), post-processed kinematic, and precise point positioning data. With reference to relevant specifications, the structural failure probability of the bridge in the vertical direction was calculated to be 0.4319. The results indicate that GNSS-RTK is reliable in monitoring structural dynamic and semi-static displacements of the bridge. Additionally, the proposed improved CEEMDAN-WP with double criterion is effective for background noise reduction. In addition, there may be some non-adequate behaviors, such as heavy traffic and vehicle overload, leading to the critical operation of the bridge.