Lian Su

Dr. Lian Su

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Jinlong YuanJinlong Yuan
Jinlong Yuan
LSLian Su
Lian Su
HXHaiyun Xia
Haiyun Xia
YLYi Li
Yi Li
MZMing Zhang
Ming Zhang
JLJianyu Li
Jianyu Li
Accurate wind shear detection is crucial for aviation safety, especially in landing and departure. A new approach for windshear alerting is proposed and demonstrated. This approach monitors orthogonal wind components in multiple runways using single coherent Doppler wind lidar (CDWL). First, the two orthogonal components of the wind field are retrieved from radial speed by an updated variational method. Then, the heading wind and cross wind on different runways are calculated simultaneously, without the location restriction of the single lidar. Finally, a windshear alerting message is generated through quantitatively evaluating the distribution of shear ramps over the monitoring area. The new CDWL-based approach for windshear alerting is implemented at the Beijing Daxing International Airport. The retrieved horizontal wind from the lidar is consistent with that from anemometers. Thanks to its high spatial/temporal resolution, some meteorological phenomena of aviation hazards, including microburst, windshear, gust front, and vortex are well captured. Particularly, all 10 windshear cases reported by crews are successfully identified during the windshear verification experiment, demonstrating the effectiveness and robustness of the new approach.

27 September 2024 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
LSLian Su
Lian Su
CLChunsong Lu
Chunsong Lu
JYJinlong Yuan
Jinlong Yuan
XWXiaofei Wang
Xiaofei Wang
QHQing He
Qing He
HXHaiyun Xia
Haiyun Xia
A vigorous development process of the deep convective boundary layer (CBL) was observed at the southern edge of the Taklimakan Desert on 6 June 2022. Based on coherent Doppler wind lidar and ERA5 data, the formation mechanism of the deep CBL exceeding 5 km was analyzed, which was mainly driven by the low-level jet (LLJ) and thermal effects. During the stage of the LLJ preceding the formation of the deep CBL, the LLJ had adequately prepared the conditions for the development of the deep CBL in terms of momentum, energy, and material. Firstly, the cold downhill airflow from the Tibetan Plateau, which leads to the formation of the LLJ, weakens the height and intensity of the temperature inversion layer, thereby reducing the energy demand for the breakdown of this layer. Secondly, the LLJ not only supplements the material and energy in the residual layer but also suppresses the exchange with the lower atmosphere. In addition, the LLJ provides a driving force for the development of the deep CBL. During the stage of thermal effects, the sensible-heat-driven air pump from the Tibetan Plateau and the passage of a cold front provide additional impetus for the development of the deep CBL. Finally, the formation of the deep CBL was catalyzed by extreme thermal effects of the underlying surface, such as the furnace effect and the atmospheric superadiabatic expansion process. The study of the development of the deep CBL is important for revealing the land–air exchange process of momentum, energy, and material between the Taklimakan Desert and the Tibetan Plateau.

6 March 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
HXHaiyun Xia
Haiyun Xia
YCYixiang Chen
Yixiang Chen
Jinlong YuanJinlong Yuan
Jinlong Yuan
LSLian Su
Lian Su
ZYZhu Yuan
Zhu Yuan
DZDexian Zhao
Dexian Zhao
Convective weather is often accompanied by precipitation and windshear, seriously endangering the safety of aircraft during takeoff and landing. However, under rainfall conditions, conventional wind lidars have a limited detection range due to significant signal attenuation. To solve this problem, a 200 mm temperature-controlled telescope coated with a hydrophobic film is applied in the coherent Doppler wind lidar system to improve the detection capability in rain. The maximum detection range of the lidar is extended to 30 km and demonstrated at Kunming Changshui International Airport at an altitude of 2102 m. Firstly, the detection accuracy and maximum detection range of the lidar are verified. Through the analysis of the horizontal wind field under two typical convective weather conditions, it is found that convective weather often accompanies low-level convergence and divergence structures, leading to headwind shear and crosswind shear on the airport runway. From the vertical profile, it is shown that the triggering of convective weather is accompanied by low-level southwest winds and high-altitude northeastern winds. According to the statistics of wind speed and direction on clear and rainy days over 9 months, rainy days are usually caused by the invasion of cold air from Northeast China, resulting in airport windshear. In summary, the enhanced lidar can effectively identify and analyze windshear during rainy days, which is very useful for aviation safety, especially for takeoff and landing in all weather conditions.

11 June 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Jinlong YuanJinlong Yuan
Jinlong Yuan
YWYunbin Wu
Yunbin Wu
Zhifeng ShuZhifeng Shu
Zhifeng Shu
LSLian Su
Lian Su
DTDawei Tang
Dawei Tang
HXHaiyun Xia
Haiyun Xia
The monitoring and tracking of urban air pollution is a challenging environmental issue. The approach of synchronous 3-D detection of wind and pollution using a solo coherent Doppler wind lidar (CDWL) is developed and demonstrated. The 3-D distribution of pollutant is depicted by the backscatter coefficient based on signal intensity of CDWL. Then, a high-resolution wind field is derived to track the local air pollution source with its diffusion and to analyze transboundary air pollution episodes. The approach is experimentally implemented in a chemical industry park. Smoke plumes caused by point source pollutions are captured well using plan position indicator (PPI) scanning with low elevation. A typical source of pollution is located, combining the trajectory of the smoke plume and the horizontal wind vector. In addition, transboundary air pollution caused by the transport of dust storms is detected in a vertical profile scanning pattern, which is consistent with the results of national monitoring stations and backward trajectory models. Our present work provides a significant 3-D detection approach to air pollution monitoring with its sources, paths, and heights by using a solo-CDWL system.

22 November 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MLmanyi li
manyi li
HXHaiyun Xia
Haiyun Xia
LSLian Su
Lian Su
HHHaobin Han
Haobin Han
YLYongkang Li
Yongkang Li
Jinlong YuanJinlong Yuan
Jinlong Yuan
Characterization of aerosol transportation is important in order to understand regional and global climatic changes. To obtain accurate aerosol profiles and wind profiles, aerosol lidar and Doppler wind lidar are generally combined in atmospheric measurements. In this work, a method for calibration and quantitative aerosol properties using coherent Doppler wind lidar (CDWL) is adopted, and data retrieval is verified by contrasting the process with synchronous Rayleigh–Mie–Raman lidar (RMRL). The comparison was applied to field measurements in the Taklimakan desert, from 16 to 21 February 2023. Good agreements between the two lidars was found, with the determination coefficients of 0.90 and 0.89 and the root-mean-square error (RMSE) values of 0.012 and 0.013. The comparative results of continuous experiments demonstrate the ability of the CDWL to retrieve aerosol properties accurately.

16 August 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
LSLian Su
Lian Su
HXHaiyun Xia
Haiyun Xia
Jinlong YuanJinlong Yuan
Jinlong Yuan
YWYue Wang
Yue Wang
AMAmina Maituerdi
Amina Maituerdi
QHQing He
Qing He
The long-term atmospheric mixing layer height (MLH) information plays an important role in air quality and weather forecasting. However, it is not sufficient to study the characteristics of MLH using long-term high spatial and temporal resolution data in the desert. In this paper, over the southern edge of the Taklimakan Desert, the diurnal, monthly, and seasonal variations in the daytime MLH (retrieved by coherent Doppler wind lidar) and surface meteorological elements (provided by the local meteorological station) in a two-year period (from July 2021 to July 2023) were statistically analyzed, and the relationship between the two kinds of data was summarized. It was found that the diurnal average MLH exhibits a unimodal distribution, and the decrease rate in the MLH in the afternoon is much higher than the increase rate before noon. From the seasonal and monthly perspective, the most frequent deep mixing layer (>4 km) was formed in June, and the MLH is the highest in spring and summer. Finally, in terms of their mutual relationship, it was observed that the east-pathway wind has a greater impact on the formation of the deep mixing layer than the west-pathway wind; the dust weather with visibility of 1–10 km contributes significantly to the formation of the mixing layer; the temperature and relative humidity also exhibit a clear trend of a concentrated distribution at about the height of 3 km. The statistical analysis of the MLH deepens the understanding of the characteristics of dust pollution in this area, which is of great significance for the treatment of local dust pollution.