Bradley Kirk

Dr. Bradley Kirk

Institute for Photonics & Advanced Sensing, University of Adelaide, Adelaide, South Australia, Australia
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
Bradley KirkBradley Kirk
Bradley Kirk
JBJonas M. Bjuggren
Jonas M. Bjuggren
GAGunther G. Andersson
Gunther G. Andersson
PDPaul Dastoor
Paul Dastoor
MAMats Andersson
Mats Andersson
Within recent years, there has been an increased interest towards organic photovoltaics (OPVs), especially with their significant device performance reaching beyond 19% since 2022. With these advances in the device performance of laboratory-scaled OPVs, there has also been more attention directed towards using printing and coating methods that are compatible with large-scale fabrication. Though large-area (>100 cm2) OPVs have reached an efficiency of 15%, this is still behind that of laboratory-scale OPVs. There also needs to be more focus on determining strategies for improving the lifetime of OPVs that are suitable for scalable manufacturing, as well as methods for reducing material and manufacturing costs. In this paper, we compare several printing and coating methods that are employed to fabricate OPVs, with the main focus towards the deposition of the active layer. This includes a comparison of performances at laboratory (100 cm2) active area fabrications, encompassing devices that use scalable printing and coating methods for only the active layer, as well as “fully printed/coated” devices. The article also compares the research focus of each of the printing and coating techniques and predicts the general direction that scalable and large-scale OPVs will head towards.

5 November 2018 in ACS Applied Energy Materials
Verified
Journal Article
Open access
JBJonas Mattiasson Bjuggren
Jonas Mattiasson Bjuggren
Anirudh SharmaAnirudh Sharma
Anirudh Sharma
DGDesta Gedefaw
Desta Gedefaw
SESait Elmas
Sait Elmas
CPCaroline Pan
Caroline Pan
MAMats Andersson
Mats Andersson
In this study, an alcohol soluble novel naphthalene diimide (NDI)-thiophene based cathode interface layer (CIL), PNDIT10N, is reported. PNDIT10N was synthesised in a facile three-step method, processed from environmentally friendly benzyl alcohol (BnOH) and employed in inverted polymer solar cells (PSCs). The three polymer donors TQ1, PTNT and PTB7-Th were paired with the fullerene acceptor PC71BM for bulk heterojunction (BHJ) layers to evaluate the CIL. The modification of the indium tin oxide (ITO) electrode with a ~3 nm thin layer of PNDIT10N yielded a significant reduction of 0.8 eV in the work function, reducing it from 4.6 eV to 3.8 eV, effectively transforming ITO to a functioning cathode. PSCs with TQ1:PC71BM BHJ layer and incorporating PNDIT10N interlayer were found to have a high Jsc of 10.5 mA cm-2, Voc of 909 mV and a FF of 68 % resulting in highest PCE of 6.7 % for TQ1 donor in inverted device structure. Of note, the interface layer showed a good stability in ambient atmosphere for a 10-day indoors ageing period, both in darkness and exposed to direct sunlight. Additionally, flexible PSCs incorporating slot-die coated PNDIT10N, processed from a BnOH-acetone solution, and BHJ layer in air achieved a PCE of 1.6%.

17 February 2022 in Materials Advances
Verified
Journal Article
Open access
PDF file
Bradley KirkBradley Kirk
Bradley Kirk
XPXun Pan
Xun Pan
MJMartyn Jevric
Martyn Jevric
GAGunther G. Andersson
Gunther G. Andersson
MAMats Andersson
Mats Andersson
Improved the thermal stability of PPDT2FBT:PC 61 BM organic solar cells fabricated via slot-die coating. This was achieved with the addition of neat fullerene C 70 to reduce the burn-in degradation associated with crystal growth of PCBM.

1 August 2023 in ACS Sustainable Chemistry & Engineering
Verified
Journal Article
Closed access
AAAmira R. Alghamdi
Amira R. Alghamdi
Bradley KirkBradley Kirk
Bradley Kirk
MAMats Andersson
Mats Andersson
GAGunther G. Andersson
Gunther G. Andersson

26 September 2022 in Molecules
Verified
Journal Article
Open access
PDF file
AAAmira R. Alghamdi
Amira R. Alghamdi
Bradley KirkBradley Kirk
Bradley Kirk
GKGuler Kocak
Guler Kocak
MAMats Andersson
Mats Andersson
GAGunther G. Andersson
Gunther G. Andersson
We investigated the effect of adding p-anisaldehyde (AA) solvent to the ink containing poly[[2,60-4,8-di(5-ethylhexylthienyl)benzo[1,2-b:3,3-b]dithiophene][3-fluoro-2[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]](PTB7-Th) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:20,30-d0]-s-indaceno[1,2-b:5,6-b0]-dithiophene(ITIC) on the morphology of the active layer. The present study focuses on determining the effect of the additive on the compositions at the surface of the PTB7-Th: ITIC composite and its morphology, forming one side of the interface of the blend with the MoOX electrode, and the influence of the structural change on the performance of devices. Studies of device performance show that the addition of the additive AA leads to an improvement in device performance. Upon the addition of AA, the concentration of PTB7-Th at the surface of the bulk heterojunction (BHJ) increases, causing an increase in surface roughness of the surface of the BHJ. This finding contributes to an understanding of the interaction between the donor material and high work function electrode/interface material. The implications for the interface are discussed.

18 April 2024 in Materials Advances
Verified
Journal Article
Open access
PDF file
Bradley KirkBradley Kirk
Bradley Kirk
AAAmira R. Alghamdi
Amira R. Alghamdi
MGMatthew J. Griffith
Matthew J. Griffith
XPXun Pan
Xun Pan
MJMartyn Jevric
Martyn Jevric
MAMats Andersson
Mats Andersson
Thermal degradation of active layer blend of PPDT2FBT:PCBM deposited via slot-die coating was investigated at 85 °C and 120 °C. The results clearly shows that care must be taken when performing accelerated ageing of OPV materials.