Antoine F. Mulaba-Bafubiandi

Dr. Antoine F. Mulaba-Bafubiandi


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2024 in Innovative Infrastructure Solutions
Verified
Journal Article
Open access
PDF file
IOIsmail Adeniyi Okewale
Ismail Adeniyi Okewale
HGHendrik Grobler
Hendrik Grobler
AMAntoine F. Mulaba-Bafubiandi
Antoine F. Mulaba-Bafubiandi
Due to continuous need of materials for infrastructural development, geomaterials of different origins are used where available. Vast majority of these materials in some countries are predominantly metamorphic and sedimentary in nature. Many of these rocks are of carbonate origin and they are encountered by practitioners worldwide. Therefore, it is very crucial to evaluate the prospect of using carbonate rocks for different applications. In this paper, laboratory tests were conducted on soft and hard carbonate rocks in order to assess their usefulness taking into consideration the mineralogy, geochemistry and geotechnics. The mineralogy is majorly calcite, the fabric is characterized by aggregation of particles to form clusters and the chemical composition is predominantly calcium oxide. The hard carbonate rocks have low porosity, medium dynamic fragmentation, medium to low water absorption, slightly strong rebound hardness value, high uniaxial compressive strength and soft carbonate rocks have low in situ specific volume and compressibility. The carbonate rocks are suitable for cement production. The hard carbonate rocks can be used for infrastructure purposes. The soft carbonate rocks are suitable for use as foundation fill materials and suitable for use as sub-grade materials. However, practitioners must be cautious when using this material as sub-base materials.

12 August 2020 in Minerals
Verified
Journal Article
Open access
PDF file
TDThomas Dzvinamurungu
Thomas Dzvinamurungu
Derek Hugh RoseDerek Hugh Rose
Derek Hugh Rose
Fanus ViljoenFanus Viljoen
Fanus Viljoen
AMAntoine F. Mulaba-Bafubiandi
Antoine F. Mulaba-Bafubiandi
A process mineralogical study based on three texturally and mineralogically different chromite-bearing ore types at the Nkomati nickel mine was undertaken, with focus on chromite. Chromite is a by-product of the Ni-Cu-Co-PGE ore at Nkomati Nickel mine. These being the PCMZ_MG (medium-grade Ni-Cu sulphide silicate ore with disseminated chromite), PCMZ_HG (high-grade Ni-Cu sulphide silicate ore containing disseminated chromite) and MCHR (massive chromite unit) ore types. These were processed using benchtop flotation followed by gravity concentration using a shaking table at different grind sizes. Quantitative mineralogical data was obtained using a 600F Mineral Liberation Analyser for the unprocessed and processed ores at three selected target grinds. The Mineral Liberation Analyser data indicated that increased milling does not relate to increased chromite grades and recoveries, particularly for the disseminated PCMZ type ores based on laboratory-scale gravity concentration. The recovery is controlled largely by the chromite chemistry. The results also showed that the MCHR samples that underwent a pre-flotation stage before gravity separation had better Cr2O3 grades (45% to 47%) and recoveries (52% to 61%) than MCHR ore that did not undergo a pre-flotation stage, which recorded grades ranging from 44% to 46% and recoveries ranging from 43% to 60%. This holds promise for the blending of MCHR ores with the PCMZ ores. The PCMZ ores also displayed better Cr2O3 grades and recoveries at coarser grinds. The optimal target grind to process all three ore types is a P80 of 75 μm, which is the current grind size employed at Nkomati Nickel mine. Due to the low nickel price and grade the Nkomati Nickel mine is currently under care and maintenance.

1 July 2016 in Desalination and Water Treatment
Verified
Journal Article
Open access
FAFeyisayo V. Adams
Feyisayo V. Adams
AMAntoine F. Mulaba-Bafubiandi
Antoine F. Mulaba-Bafubiandi
Polysulphone/clay ion-exchange membranes were prepared by the phase inversion method using N-methyl-2 pyrrolidone as solvent. The aims of this work were to synthesize and investigate the effect of different natural clays from different locations on the morphology, hydrophilicity, structure, swellability, metal extraction from water and ion-exchange capacity (IEC) of the membranes prepared. The characterization techniques used were scanning electron microscopy, X‐ray diffractometry, Fourier transform infra-red spectroscopy and contact angle. The clays from locations 1 (N4) and 2 (N6) had a good dispersion in the polysulphone matrix and exhibited high IEC, swellability and hydrophilicity. The 2θ of the polysulphone/clay membranes compared to polysulphone membrane was lower, indicating an increase in the d-spacing between layers of the clays and also intercalation of clay layer silicates in the polymer matrix. Extraction/adsorption of Pb2+ by all the tested membranes was faster (10 min) compared to Cu2+, and it was approximately 100%.

18 February 2025 in Discover Geoscience
Verified
Journal Article
Open access
PDF file
IOIsmail Adeniyi Okewale
Ismail Adeniyi Okewale
HGHendrik Grobler
Hendrik Grobler
AMAntoine F. Mulaba-Bafubiandi
Antoine F. Mulaba-Bafubiandi
Detailed study has been conducted on the assessment of the effects of chemical constituents (silica and impurities) of siliciclastic sedimentary sands on their mechanical behaviour through geochemical analysis using scanning electron microscope equipped with electron dispersive spectrometer, one-dimensional compression characteristics using oedometer test data, particle breakage and particle shape analyses using grading and petrographic microscope. The samples are poorly graded in grading and predominantly quartz in mineralogy and silica in chemical composition. Alumina is the most significant impurity because it influences the compressibility and the particle breakage of the samples. This is followed by the calcium oxide, sulphur oxide, phosphorous oxide, iron oxide and magnesium oxide in that order. The impurities have the most influence on the particle breakage followed by the compressibility and then the particle shape. The silica content has the most significant influence on the particle breakage and it has weak effects on the compressibility and particle shape, which could be linked to closeness of the value obtained. It is interesting to observe the rotational effects of impurities and silica on the particle shape characteristics of siliciclastic sedimentary sands. Since the influences of impurities on the mechanical characteristics of the specimens have been found, the practitioners and users of this important material must consider the removal of impurities in these materials before putting them into use for different applications.


5 June 2026 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
Thendo MphaphathiThendo Mphaphathi
Thendo Mphaphathi
SSShanil Narain Singh
Shanil Narain Singh
TMTakalani Madzivhandila
Takalani Madzivhandila
AMAntoine F. Mulaba-Bafubiandi
Antoine F. Mulaba-Bafubiandi
Jan Harm C. PretoriusJan Harm C. Pretorius
Jan Harm C. Pretorius
Pumped Energy Storage Schemes play a critical role in electricity grid stability and energy security by storing excess electricity for later use. Pressure vessels in these systems are subject to rigorous inspection regimes because of their potential risks to safety and performance. Traditional Time-Based Inspection, while effective, can be costly and inefficient. This paper investigates the application of Risk-Based Inspection methodologies to optimise inspection planning, reduce costs, and maintain safety in Pumped Energy Storage Scheme pressure vessels. The study presents a structured framework for implementing Risk-Based Inspection, demonstrates the potential for cost savings through comparative analysis, and highlights its alignment with regulatory requirements in South Africa.