A sliding-mode control based on a prescribed performance function is proposed for discrete-time single-input single-output systems. The controller design aims to maintain the tracking error in a predefined convergence zone described by a performance function. However, due to the fixed structure of the controller, the applicability and universality of this method are limited. To address this issue, we separate the controller into two parts and analyze the principle of the prescribed performance control (PPC) method. Then we can replace the linear part of the controller with model-based control methods to adapt to the specific characteristics of the controlled system. Compared with current works, when the established system model is inaccurate, we can enhance the smoothness or response speed of the system by introducing a penalty constant to alter the system’s transient characteristics while the tracking error is within the prescribed domain. Finally, numerical comparison simulations and a lower limb exoskeleton experiment illustrate the established results and the effectiveness of the proposed method.
14 September 2022 in International Journal of Aerospace Engineering
Building a simulated weightless test system on the ground while making comprehensive comparisons of design controllers for a large and heavy multijointed space station robot is not an easy task. To save cost and improve the efficiency of the test, this paper develops a plan in which controllers undergo preliminary testing in a 6-DOF industrial robot. The key idea is gravity compensation included within the dynamic control algorithm of the robot to replace the function of the microgravity environment. It is generally difficult to build an accurate dynamic model for a serial-joint robot in a practical manner. Therefore, to guarantee the stability of the 6-DOF industrial robot in which the dynamic model is built inaccurately, we propose one of the simplest variable structure (VS) controllers, and the stability of the system is analyzed through the Lyapunov method. Last, experiments are carried out to provide preliminary comparisons among three potential algorithms for the space robot in a low-cost and efficient approach.