Reconfigurable intelligent surface (RIS) is considered to be an energy-efficient approach to reshape the wireless environment for improved throughput. Its passive feature greatly reduces the energy consumption, which makes RIS a promising technique for enabling the future smart city. Existing beamforming designs for RIS mainly focus on optimizing the spectral efficiency for single carrier systems. Meanwhile, complicated bit/power allocation on different spatial domain subchannels needs to be designed for better bit error rate (BER) performance in conventional singular value decomposition-based beamforming. To avoid this, in this paper, we propose a geometric mean decomposition-based beamforming for RIS-assisted millimeter wave (mmWave) hybrid MIMO systems. In this way, multiple parallel data streams in the spatial domain can be considered to have the same channel gain, so that the better BER can be achieved without sophisticated bit/power allocation. Moreover, by exploiting the common angular-domain sparsity of mmWave massive MIMO channels over different subcarriers, a simultaneous orthogonal matching pursuit algorithm is utilized to obtain the optimal multiple beams from an oversampling 2D-DFT codebook. Besides, by only leveraging the angle of arrival and angle of departure associated with the line of sight (LoS) channels, we further design the phase shifters for RIS by maximizing the array gain for LoS channel. Simulation results show that the proposed scheme can achieve better BER performance than conventional approaches. Our work is an initial attempt to discuss the broadband beamforming for RIS-assisted mmWave massive MIMO with the hybrid architecture.

This paper proposes a closed-loop sparse channel estimation (CE) scheme for wideband millimeter-wave hybrid full-dimensional multiple-input multiple-output and time division duplexing based systems, which exploits the channel sparsity in both angle and delay domains. At the downlink CE stage, random transmit precoding matrix is designed at base station (BS) for channel sounding, and receive combining matrices at user devices (UDs) are designed whereby the hybrid array is visualized as a low-dimensional digital array for facilitating the multi-dimensional unitary ESPRIT (MDU-ESPRIT) algorithm to estimate respective angle-of-arrivals (AoAs). At the uplink CE stage, the estimated downlink AoAs, namely, uplink angle-of-departures (AoDs), are exploited to design multi-beam transmit precoding matrices at UDs to enable BS to estimate the uplink AoAs, i.e., the downlink AoDs, and delays of different UDs, whereby the MDU-ESPRIT algorithm is used based on the designed receive combining matrix at BS. Furthermore, a maximum likelihood approach is proposed to pair the channel parameters acquired at the two stages, and the path gains are then obtained using least squares estimator. According to spectrum estimation theory, our solution can acquire the super-resolution estimations of the AoAs/AoDs and delays of sparse multipath components with low training overhead. Simulation results verify the better CE performance and lower computational complexity of our solution over state-of-the-art approaches.

The emerging space-air-ground integrated network has attracted intensive research and necessitates reliable and efficient aeronautical communications. This paper investigates terahertz Ultra-Massive (UM)-MIMO-based aeronautical communications and proposes an effective channel estimation and tracking scheme, which can solve the performance degradation problem caused by the unique triple delay-beam-Doppler squint effects of aeronautical terahertz UM-MIMO channels. Specifically, based on the rough angle estimates acquired from navigation information, an initial aeronautical link is established, where the delay-beam squint at transceiver can be significantly mitigated by employing a Grouping True-Time Delay Unit (GTTDU) module (e.g., the designed Rotman lens -based GTTDU module). According to the proposed prior-aided iterative angle estimation algorithm, azimuth/elevation angles can be estimated, and these angles are adopted to achieve precise beam-alignment and refine GTTDU module for further eliminating delay-beam squint. Doppler shifts can be subsequently estimated using the proposed prior-aided iterative Doppler shift estimation algorithm. On this basis, path delays and channel gains can be estimated accurately, where the Doppler squint can be effectively attenuated via compensation process. For data transmission, a data-aided decision-directed based channel tracking algorithm is developed to track the beam-aligned effective channels. When the data-aided channel tracking is invalid, angles will be re-estimated at the pilot-aided channel tracking stage with an equivalent sparse digital array, where angle ambiguity can be resolved based on the previously estimated angles. The simulation results and the derived Cramér-Rao lower bounds verify the effectiveness of our solution.

In this letter, we exploit the potential benefits of machine learning in enhancing physical layer security in multi-input multi-output multi-antenna-eavesdropper wiretap channels. To this end, we focus on the scenario where the source adopts transmit antenna selection (TAS) as the transmission strategy. We assume that the channel state information (CSI) of the legitimate receiver is available to the source, while the CSI of the eavesdropper can be either known or not known at the source. By modeling the problem of TAS as a multi-class classification problem, we propose two machine learning based schemes, namely, the support vector machine-based scheme and the naive-Bayes-based scheme, to select the optimal antenna that maximizes the secrecy performance of the considered system. Compared to the conventional TAS scheme, we show that our proposed schemes can achieve almost the same secrecy performance with relatively small feedback overhead. The work presented here provides insights into the design of new machine learning based secure transmission schemes.

Faster-than-Nyquist (FTN) signaling has attracted a lot of attentions for the fifth-generation (5G) cellular communication systems. However, low-complexity receiver design for FTN signaling becomes challenging. In this paper, we develop frequency-domain joint channel estimation and decoding methods for FTN signaling transmitting systems over frequency-selective fading channels. To deal with the colored noise inherent in FTN signaling, we propose to approximate the corresponding autocorrelation matrix by a circulant matrix, the special eigenvalue decomposition of which facilitates an efficient fast Fourier transform operation and decoupling the noise in frequency domain. Through a specific partition of the received symbols, many independent estimates are obtained and combined to further improve the accuracy of the channel estimation and data detection. Moreover, instead of assuming the data symbols to be Gaussian random variables, a generalized approximated message passing (GAMP)-based equalization is developed and embedded in the turbo iterations between the channel estimation and the soft-in soft-out decoder. Simulation results show that the proposed algorithm outperforms the cyclic prefix (CP)-based and overlap-based frequency-domain equalization methods. With the proposed algorithms, FTN signaling reaches up to 67% higher transmission rate compared to the Nyquist counterpart without substantially consuming more transmitter energy per bit, and the overall complexities grow logarithmically with the length of the observations.

Orthogonal time frequency space (OTFS) modulation has been proved to have better bit error rate (BER) performance over orthogonal frequency division multiplexing (OFDM) under high-mobility conditions. In this letter, a new transmission scheme, called OTFS with dual-mode index modulation (OTFS-DM-IM), is proposed to balance the transmission reliability and spectral efficiency. Moreover, a modified log-likelihood ratio (LLR) detector based on the minimum Hamming distance is designed for demodulation. Then, the theoretical BER analysis of the proposed OTFS-DM-IM is presented. Simulation results highlight the performance advantage of OTFS-DM-IM over classical OTFS and the existing OTFS systems based on index modulation (OTFS-IM), and also confirm the superiority of the modified LLR detector compared to maximum likelihood detector and conventional LLR detector.