Ting ting Li

Dr. Ting ting Li


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YMYingjie Meng
Yingjie Meng
CXChengwu Xu
Chengwu Xu
TLTing ting Li
Ting ting Li
TLTianyong Liu
Tianyong Liu
LTLu Tang
Lu Tang
JZJinyou Zhang
Jinyou Zhang
Total organic carbon (TOC) content is an important parameter for evaluating the abundance of organic matter in, and the hydrocarbon production capacity, of shale. Currently, no prediction method is applicable to all geological conditions, so exploring an efficient and accurate prediction method suitable for the study area is of great significance. In this study, for the shale of the Qingshankou Formation of the Gulong Sag in the Songliao Basin, TOC content prediction models using various machine learning algorithms are established and compared based on measured data, principal component analysis, and the particle swarm optimization algorithm. The results showed that GR, AC, DEN, CNL, LLS, and LLD are the most sensitive parameters using the Pearson correlation coefficient. The four principal components were also identified as input features through PCA processing. The XGBoost prediction model, established after selecting the parameters through PSO intelligence, had the highest accuracy with an R2 and RMSE of 0.90 and 0.1545, respectively, which are superior to the values of the other models. This model is suitable for the prediction of TOC content and provides effective technical support for shale oil exploration and development in the study area.

17 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LTLu Tang
Lu Tang
TLTing ting Li
Ting ting Li
CXChengwu Xu
Chengwu Xu
With the deepening of oilfield development, logging data proliferate, and their complexity makes manual stratigraphic division both difficult and time-consuming. Aimed at the current network model widely used to solve the problem of stratigraphic delineation, which has problems such as not considering the multi-scale features of logging curves and insufficient accuracy, the YOLOv8x target detection algorithm in deep learning is utilized to detect the target strata, which has the ability to characterize the multi-scale features and can improve the efficiency and accuracy of the division. In order to better localize and identify targets, this paper proposes a new stratigraphic automatic division method, YOLOv8x-CAMDP, which introduces a CA (Coordinate Attention) mechanism module into the original YOLOv8x model to improve the model’s ability to identify stratigraphic interval boundaries. In addition, the CIOU loss function in the original YOLOv8x network model was replaced using the MDPIOU loss function to effectively improve the accuracy and efficiency of bounding box regression. Based on the logging data from the Xing 10 area pure oil zone, a thorough comparison of the YOLOv8x-CAMDP and YOLOv8x models’ training results is presented. The YOLOv8x-CAMDP model achieves a mean Average Precision (mAP) value of 98.7%, outperforming the YOLOv8x model by one percentage point. Moreover, the YOLOv8x-CAMDP model demonstrates greater precision in boundary division for each stratigraphic interval. The application of the YOLOv8x-CAMDP model to project implementation achieved significant results in stratigraphic division, reduced workload, and optimized manual division. These results not only confirm the practical value of the YOLOv8x-CAMDP model but also demonstrate the prospect and potential of its wide application.

21 April 2026 in ACS Omega
Verified
Journal Article
Open access
QYQi Yao
Qi Yao
CXChengwu Xu
Chengwu Xu
TLTing ting Li
Ting ting Li
CLChuanhao Li
Chuanhao Li
HLHongyu Li
Hongyu Li
YHYujia Han
Yujia Han
Organic-rich shales of Cretaceous age are widely developed in the Qian’an area of the Songliao Basin and represent an important exploration target for continental shale oil in China. However, due to complex depositional environments, diverse lithological assemblages, and strong lamination-related heterogeneity, the characteristics of reservoir space and their controlling factors among different lithofacies remain poorly constrained. This study aims to clarify the differences in reservoir space among various laminated shale lithofacies and to elucidate their formation mechanisms, thereby providing a geological basis for identifying favorable lithofacies in continental shale oil systems. Shales of the Qingshankou Formation in the Qian’an area were investigated through detailed core observations combined with thin-section petrography, scanning electron microscopy (SEM), X-ray diffraction (XRD), Rock–Eval pyrolysis, high-pressure mercury intrusion, low-temperature nitrogen adsorption, and laser confocal microscopy. Based on these integrated data sets, laminated shales were systematically classified into lithofacies, and the pore structure characteristics and controlling factors of different lithofacies were comparatively analyzed. The results indicate that the Qingshankou Formation shales are lithologically heterogeneous and well laminated and are generally characterized by low porosity and low permeability, with pronounced variations in reservoir properties under different depositional settings. Using an integrated hierarchical classification scheme based on lithology/mineral composition, sedimentary structure, and total organic carbon (TOC) content, eight lithofacies were identified, including clay-rich shale with high-density lamination and high TOC, felsic-rich shale with high-density lamination and high TOC, felsic-rich shale with low-density lamination and moderate TOC, felsic-rich shale with low-density lamination and low TOC, massive mud shale with low TOC, bedded siltstone with low TOC, bedded bioclastic limestone with moderate TOC, and bedded dolostone with moderate TOC. Significant differences in pore types, pore structure, and oil-bearing properties are observed among the identified lithofacies. Among them, the low-TOC bedded siltstone lithofacies exhibit the most favorable reservoir performance, characterized by abundant interparticle pores, dissolution pores and fractures, well-developed pore connectivity, and relatively high oil saturation. The formation and evolution of shale reservoir space are jointly controlled by mineral composition, organic matter abundance, and lamination development. TOC exerts a persistent control on micropore development throughout thermal evolution, whereas rigid detrital grains such as quartz and feldspar within silt-rich laminae form grain-supported frameworks that effectively preserve interparticle pores during compaction, thereby increasing the proportion of meso- to macropores and promoting shale oil enrichment. These results demonstrate that the enrichment potential of laminated shale oil systems is controlled by a multiscale coupling process linking lamina attributes, lithofacies architecture, and formation-scale source–reservoir configuration, rather than by organic matter abundance alone. This insight provides valuable implications for the identification of favorable lithofacies and shale oil exploration and development in the Qingshankou Formation and other continental shale oil basins.

1 May 2026 in ACS Omega
Verified
Journal Article
Open access
CXChengwu Xu
Chengwu Xu
QYQi Yao
Qi Yao
CLChuanhao Li
Chuanhao Li
TLTing ting Li
Ting ting Li
HLHongyu Li
Hongyu Li
YHYujia Han
Yujia Han
During the in situ thermal upgrading of low-maturity shale, the reorganization of the pore-fracture system directly controls reservoir connectivity and hydrocarbon migration efficiency. However, under true triaxial stress constraints, the thermo-mechanical coupling mechanisms and the overall structural complexity evolution remain insufficiently understood. In this study, low-maturity organic-rich shale from the Jitunjun Formation in the Fushun Basin was subjected to in situ heating experiments under true triaxial conditions. Multiscale characterization methods, including scanning electron microscopy (SEM), low-temperature gas adsorption, and high-pressure mercury intrusion, were employed to investigate the pore-structure evolution at different temperature stages. Fractal parameters across multiple pore-size ranges were derived by using the FHH model and mercury intrusion fractal models. A pore-volume-weighted comprehensive fractal dimension (Dcomp) was further constructed to achieve unified quantification of pore-fracture network complexity over the full pore-size spectrum. The results show that micropore variation is limited, mesopores develop significantly at 350–450 °C, and macropores continuously increase with temperature, playing a dominant role in connectivity enhancement. The pore system exhibits stable bifractal behavior. Dcomp is positively correlated with the specific surface area and total pore volume and negatively correlated with average pore size, indicating that structural complexity is primarily controlled by the development of mesopores to macropores and increasing diversity of connectivity pathways. Integrated analysis identifies 400–500 °C as the critical temperature interval during which the pore-fracture network transitions from local connectivity to a multiscale interconnected system. This study confirms the applicability of fractal theory under true triaxial in situ thermomechanical conditions and provides a quantitative framework for evaluating thermal upgrading effectiveness and optimizing reservoir structure.

22 July 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CLChuanhao Li
Chuanhao Li
CXChengwu Xu
Chengwu Xu
TLTing ting Li
Ting ting Li
QYQi Yao
Qi Yao
颖王颖 梦 王
颖 梦 王
Borehole electrical imaging logs provide important sensor-derived information for identifying fractures, bedding structures, and reservoir heterogeneity. However, strip-like missing regions commonly arise from uneven tool pad distribution, incomplete borehole coverage, and acquisition limitations, which can distort geological structures and reduce interpretation reliability. Because the true values inside real missing regions are unobservable, complete ground-truth labels are generally unavailable. This study therefore proposes a real missing-region-constrained self-supervised inpainting framework for borehole electrical imaging logs. The key idea is to use real missing masks to define safe intact regions and to generate artificial strip-like training masks only within those reliable regions, thereby avoiding supervision contamination from originally missing or adjacent unstable areas. A UNet-based inpainting model is developed, and two attention-enhanced variants, UNet-SE and UNet-CBAM, are evaluated together with Telea and Navier–Stokes baselines. In addition to the main comparison, mask-level ablation, model-level ablation, repeated-seed robustness analysis, and lightweight expert-assisted geological assessment are used to examine the reliability of the proposed strategy. The results show that learning-based methods consistently outperform conventional approaches for structurally complex strip-like gaps. UNet-CBAM achieves the best overall performance, with mask-MAE, mask-PSNR, and mask-SSIM values of 14.8, 21.2 dB, and 0.8, respectively. The safe-region-constrained strategy further reduces supervision contamination and improves reconstruction quality compared with random or less restrictive mask-generation strategies. These findings indicate that the proposed framework offers a practical self-supervised solution for improving the quality and interpretability of sensor-captured borehole imaging logs when complete labels are unavailable.

2 October 2026 in Processes
Verified
Journal Article
Open access
PDF file
SGSongyang Gao
Songyang Gao
HZHaibo Zhao
Haibo Zhao
SYShujun Yin
Shujun Yin
JFJunyuan Fan
Junyuan Fan
Jinbiao GaoJinbiao Gao
Jinbiao Gao
JZJianliang Zhang
Jianliang Zhang
Accurate pore pressure estimation in tight sandstone reservoirs is hampered by the limited sensitivity of conventional approaches, which rely on a single acoustic or resistivity log and assume shale undercompaction as the dominant overpressure mechanism. This study develops a hybrid BiLSTM-CNN model that integrates multi-parameter well-log responses to predict pore pressure equivalent density in the Upper Triassic XJH Formation of the northeastern Sichuan Basin, a tight sandstone succession deposited at the end of the Late Triassic. Downhole pressure measurements from five wells and their corresponding logging curves were compiled, yielding 2163 data points after outlier filtering and missing-value interpolation. Grey relational analysis (GRA) ranked six logging parameters—acoustic transit time, bulk density, invaded-zone resistivity, compressional slowness, deep lateral resistivity, and gamma ray—as the most informative model inputs. The network couples a two-layer BiLSTM with 64 hidden units per layer for bidirectional depth-sequence modeling and three parallel one-dimensional convolutional branches with dilation rates of 1, 2, and 3 for multi-scale local feature extraction. The model of test data achieved R2 = 0.968, RMSE = 0.0147 g/cm3, and MAE = 0.0116 g/cm3, outperforming four benchmark algorithms (BP, KNN, GBRT, and SVR). Predicted pressure profiles for a verification well reproduced lithologically controlled pressure contrasts between sandstone and mudstone members. Spatial pressure maps for the X2, X4, and X6 intervals, generated by interpolating predictions across multiple wells, show that overpressured zones coincide with greater burial depth and stronger top-seal integrity. These findings demonstrate that coupling depth-directional sequence learning with multi-scale convolutional feature extraction offers a reliable data-driven framework for pore pressure characterization in low-porosity clastic systems.