Nisa Nur ATAK

Nisa Nur ATAK

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

28 May 2024 in Energies
Verified
Journal Article
Open access
PDF file
BKBerre Kumuk
Berre Kumuk
NANisa Nur ATAK
Nisa Nur ATAK
BDBattal Dogan
Battal Dogan
SÖSALIH ÖZER
SALIH ÖZER
PDPinar Demircioglu
Pinar Demircioglu
IBIsmail Bogrekci
Ismail Bogrekci
This study examines the thermodynamic and numerical analyses of a methane-fed solid oxide fuel cell (SOFC) over a temperature range varying between 873 K and 1273 K. These analyses were conducted to investigate and compare the performance of the SOFC under various operating conditions in detail. As part of the thermodynamic analysis, important parameters such as cell voltage, power density, exergy destruction, entropy generation, thermal efficiency, and exergy efficiency were calculated. These calculations were used to conduct energy and exergy analyses of the cell. According to the findings, an increase in operating temperature led to a significant improvement in performance. At the initial conditions where the SOFC operated at a temperature of 1073 K and a current density of 9000 A/m2, it was observed that when the temperature increased by 200 K while keeping the current density constant, the power density increased by a factor of 1.90 compared to the initial state, and the thermal efficiency increased by a factor of 1.45. Under a constant current density, the voltage and power density values were 1.0081 V, 1.0543 V, 2337.13 W/m2, and 2554.72 W/m2 at operating temperatures of 1073 K and 1273 K, respectively. Under a current density of 4500 A/m2, the entropy generation in the cell was determined to be 29.48 kW/K at 973 K and 23.68 kW/K at 1173 K operating temperatures. The maximum exergy efficiency of the SOFC was calculated to be 41.67% at a working temperature of 1273 K and a current density of 1500 A/m2. This study is anticipated to be highly significant, as it examines the impact of temperature variation on exergy analysis in SOFC, validating both numerical and theoretical results, thus providing a crucial roadmap for determining optimized operating conditions.

1 January 2024 in International Journal of Exergy
Verified
Journal Article
Closed access
NANisa Nur ATAK
Nisa Nur ATAK
Zeynep ERDEMZeynep ERDEM
Zeynep ERDEM
ŞTŞevval Tuna
Şevval Tuna
BDBattal Doğan
Battal Doğan
MYMurat Kadir Yeşilyurt
Murat Kadir Yeşilyurt

30 December 2023 in Ct&f - Ciencia, Tecnología Y Futuro
Verified
Journal Article
Open access
PDF file
GIGehad Yasser Aly Maher Ibrahim
Gehad Yasser Aly Maher Ibrahim
NANisa Nur ATAK
Nisa Nur ATAK
BDBattal Dogan
Battal Dogan
Murat Kadir YesilyurtMurat Kadir Yesilyurt
Murat Kadir Yesilyurt
HYHayri Yaman
Hayri Yaman
The growing demand for energy, coupled with volatile oil prices and the environmental damage caused by the harmful gases produced when it is used, has prompted countries to explore alternative energy sources. The transportation sector, an important end-user of petroleum, must adapt to the changing energy landscape and opt for new technologies to remain competitive. The study conducted a thorough thermodynamic analysis to assess the economic and environmental impact of using biodiesel (BD) made from cold-pressed linseed crude oil, commercial diesel fuel (DF), and ethanol in a compression-ignition (CI) engine. The study conducted a detailed thermodynamic analysis of performance and emission data recorded from a single-cylinder diesel engine. The analysis included energy, exergy, sustainability, exergoeconomic, exergoenvironmental, and exergoenviroeconomic parameters. The results pointed out that the fuel energy increases with the load, with B20E5 fuel reaching 6.887 kW at 25% load and 18.908 kW at 75% load. BD and blended fuels were found to have a higher fuel energy compared to DF. At 50% load, DF and B20 fuels have fuel energies of 10.765 kW and 10.888 kW, respectively. The analysis clearly demonstrates that commercial DF outperforms both DF-BD binary fuel blends and DF-BD-ethanol blends in terms of thermal and exergy efficiency values. Furthermore, DF exhibits lower entropy generation and exergy destruction than other binary and ternary blends. At maximum load, the exergy efficiencies of DF, B20, and B20E10 fuels were 28.5%, 25.8%, and 24.7%, respectively. The exergy losses were determined to be 10.495 kW, 12.317 kW, and 13.134 kW, respectively, under the same conditions. Binary and ternary fuel blends have a higher cost of power from the engine shaft due to the expensive market prices of ethanol and linseed oil-based BD compared to DF. However, B20 and B20E10 fuels have a lower environmental cost than DF, with B20 and B20E10 fuels estimated to be 2.8% and 5.3% lower than DF, respectively, at full load. These findings demonstrate the clear advantages of using B20 and B20E10 fuels over DF, both in terms of cost and environmental impact. Additionally, the infusion of ethanol into ternary blends reduces the environmental damage. This study provides a unique perspective on sustainable energy research and serves as a valuable reference for future studies.

2 February 2024 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Verified
Journal Article
Closed access
BDBattal Dogan
Battal Dogan
Murat Kadir YesilyurtMurat Kadir Yesilyurt
Murat Kadir Yesilyurt
NANisa Nur ATAK
Nisa Nur ATAK
Diesel engines will continue to be discussed in the coming years because of their harm to the environment resulting from emitted pollutants. These engines are unrivaled in the transportation industry owing to the high power achieved at high compression ratios. In recent years, studies have been carried out on the use of alternative fuels instead of diesel in compression ignition engines. Fusel oil (FO) is a by-product acquired from several types of agricultural biomass by different techniques. To conclude, in the present paper, researches in the published literature for diesel engines using fuel blends containing FO as an alternative fuel have been reviewed in detail. FO's high octane number, high oxygen content, and low freezing point make it stand out as a fuel additive. In addition, the calorific value of FO is lower than diesel, and its density and viscosity are higher. When FO is infused at different concentrations to diesel fuel (DF) or DF-biodiesel mixtures, fuel consumption increases in compression-ignition engines while engine power decreases compared to reference DF. There is a noticeable decrease in CO and NOx pollutants in fuel blends using FO. The amount of water in the FO has an adverse effect on diesel engines. In the article, firstly, the production and properties of FO are reviewed and its fuel properties are summarized. Then, the effects of diesel/FO and diesel/biodiesel/FO mixtures on engine performance and emissions are discussed. Finally, the positive and negative aspects of FO for diesel engines are summarized.

22 March 2024 in International Journal of Energy Studies
Verified
Journal Article
Open access
PDF file
SHSerdar Halis
Serdar Halis
NANisa Nur ATAK
Nisa Nur ATAK
BDBattal Dogan
Battal Dogan
In this research, the performance analysis of a cathode-supported solid oxide fuel cell (SOFC) with an active cell area of 0.0834 m2 and a cathode thickness of 750 µm was carried out under three different operating temperatures (973 K, 1073 K and 1173 K). The power density and cell potential were calculated by determining the losses in the cell at 8 different current densities (1500 A/m2 - 5000 A/m2) for each operating temperature. It was observed that ohmic losses in SOFC have a lower effect on the cell potential compared to other losses. An increase of the operating temperature by 100 K resulted in a decrease in ohmic losses of 3.36×10-8 V under constant current density (CD). In addition, the rise in CD negatively affected all the losses in the cell and decreased the cell voltage. The exergy and energy analysis of SOFC was carried out by calculating the thermal efficiency, exergy destruction, entropy production and exergy efficiency for various operating parameters. An increment of 200 K in the operating temperature increased the thermal efficiency by approximately 2 times at a CD of 5000 A/m2. Also, the minimum entropy production was obtained at an operating temperature of 1173 K and a CD of 1500 A/m2. In this case, the entropy production was calculated as 2.63 kW/K, resulting in a maximum exergy efficiency of 66.93%.