Hayri Yaman

Prof. Dr. Hayri Yaman


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2024 in Fuel
Verified
Journal Article
Closed access
BDBattal Doğan
Battal Doğan
MYMurat Kadir Yeşilyurt
Murat Kadir Yeşilyurt
HYHayri Yaman
Hayri Yaman
NKNesrin Korkmaz
Nesrin Korkmaz
AAAhmet Arslan
Ahmet Arslan


13 July 2022 in Science and Technology for Energy Transition
Verified
Journal Article
Open access
PDF file
ZYzeki yılbaşı
zeki yılbaşı
Murat Kadir YesilyurtMurat Kadir Yesilyurt
Murat Kadir Yesilyurt
HYHayri Yaman
Hayri Yaman
MAMevlut Arslan
Mevlut Arslan
The core focus of the present investigation is regarding biodiesel production from industrial hemp seed oil applying single-stage homogenous catalyzed transesterification process obtaining high yield of methyl ester. The engine tests were carried out on a single-cylinder, four-stroke, water-cooled, unmodified diesel engine operating with hemp seed oil methyl ester as well as its blends with conventional diesel fuel. The experimental findings of the test fuels were compared with those from diesel. The results pointed out that the performance and combustion behaviors of biodiesel fuels are just about in line with those of diesel fuel propensity. The specific fuel consumption for 5% biodiesel blend (0.291 kg/kW h), 10% biodiesel blend (0.305 kg/kW h), and 20% biodiesel blend (0.312 kg/kW h) blends at full load was closer to diesel (0.275 kg/kW h). In the meantime, the thermal efficiency for biodiesel was found to be at the range of 15.98–24.97% and it was slightly lower than that of diesel (18.10–29.85%) at the working loads. On the other hand, the harmful pollutant characteristics of carbon monoxide, hydrocarbon, and smoke opacity for biodiesel and its blends were observed to be lower in comparison with diesel during the trials. However, the oxides of nitrogen emissions for biodiesel were monitored to be as 6.85–15.40 g/kW h which was remarkably higher than that of diesel (4.71–8.63 g/kW h). Besides that, the combustion behaviors of biodiesel and its blends with diesel showed much the same followed those of diesel. Namely, the duration of ignition delay of biodiesel–diesel blends was shorter than that of diesel fuel because of the higher cetane number specification of the methyl ester. The highest gas pressures inside the cylinder as well as the rates of the heat release of biodiesel including test fuels are lower in contrast to the diesel due to the shorter ignition delay. It could be concluded that the utilization of biodiesel produced from industrial hemp seed oil in the diesel engine up to 20% (by vol.) will decrease the consumption of diesel and environmental pollution, especially in developing countries.


28 November 2022 in International Journal of Engine Research
Verified
Journal Article
Closed access
HYHayri Yaman
Hayri Yaman
BDBattal Doğan
Battal Doğan
DEDerviş EROL
Derviş EROL
MYMurat Kadir Yeşilyurt
Murat Kadir Yeşilyurt
This study was focused to develop a power generation system that could use renewable energy resources more efficiently. In accordance with this purpose, the design, manufacturing, and testing of a Stirling engine with a β-type slider-crank drive mechanism were carried out. Helium, nitrogen, and air were utilized as working fluids, and experimental studies were performed at various charge pressures. Moreover, the effects of three different channel geometries in the displacer cylinder on the performance were researched. The maximum power was obtained as 160.5 W in a 120-slot channel displacer cylinder in the helium working fluid at a charge pressure of 4 bar and 400 rpm engine speed. The highest torque was found to be 7.92 Nm in a 66-slot channel displacer cylinder in the helium working fluid at the aforementioned charge pressure and 100 rpm engine speed. The lowest engine power output among the maximum engine powers was obtained to be 48.3 W when air was used as a working fluid at a pressure of 4 bar and an engine speed of 200 rpm, using a smooth displacer cylinder. Use of channels in the displacer cylinder and the increased number of channels had positive effects on engine performance. It was determined that the maximum engine power output obtained in the experimental studies was 46.0% and 49.86% higher in the 66-slot channel, and 120-slot channel cylinders, respectively, compared to the smooth displacer cylinder. It has been observed that when the number of channels on the displacer cylinder was increased by approximately 81.8%, an increase of approximately 2.62% was obtained in the engine power output. This situation revealed that optimization of the number of channels is important.

30 December 2023 in Ct&f - Ciencia, Tecnología Y Futuro
Verified
Journal Article
Open access
PDF file
GIGehad Yasser Aly Maher Ibrahim
Gehad Yasser Aly Maher Ibrahim
NANisa Nur ATAK
Nisa Nur ATAK
BDBattal Dogan
Battal Dogan
Murat Kadir YesilyurtMurat Kadir Yesilyurt
Murat Kadir Yesilyurt
HYHayri Yaman
Hayri Yaman
The growing demand for energy, coupled with volatile oil prices and the environmental damage caused by the harmful gases produced when it is used, has prompted countries to explore alternative energy sources. The transportation sector, an important end-user of petroleum, must adapt to the changing energy landscape and opt for new technologies to remain competitive. The study conducted a thorough thermodynamic analysis to assess the economic and environmental impact of using biodiesel (BD) made from cold-pressed linseed crude oil, commercial diesel fuel (DF), and ethanol in a compression-ignition (CI) engine. The study conducted a detailed thermodynamic analysis of performance and emission data recorded from a single-cylinder diesel engine. The analysis included energy, exergy, sustainability, exergoeconomic, exergoenvironmental, and exergoenviroeconomic parameters. The results pointed out that the fuel energy increases with the load, with B20E5 fuel reaching 6.887 kW at 25% load and 18.908 kW at 75% load. BD and blended fuels were found to have a higher fuel energy compared to DF. At 50% load, DF and B20 fuels have fuel energies of 10.765 kW and 10.888 kW, respectively. The analysis clearly demonstrates that commercial DF outperforms both DF-BD binary fuel blends and DF-BD-ethanol blends in terms of thermal and exergy efficiency values. Furthermore, DF exhibits lower entropy generation and exergy destruction than other binary and ternary blends. At maximum load, the exergy efficiencies of DF, B20, and B20E10 fuels were 28.5%, 25.8%, and 24.7%, respectively. The exergy losses were determined to be 10.495 kW, 12.317 kW, and 13.134 kW, respectively, under the same conditions. Binary and ternary fuel blends have a higher cost of power from the engine shaft due to the expensive market prices of ethanol and linseed oil-based BD compared to DF. However, B20 and B20E10 fuels have a lower environmental cost than DF, with B20 and B20E10 fuels estimated to be 2.8% and 5.3% lower than DF, respectively, at full load. These findings demonstrate the clear advantages of using B20 and B20E10 fuels over DF, both in terms of cost and environmental impact. Additionally, the infusion of ethanol into ternary blends reduces the environmental damage. This study provides a unique perspective on sustainable energy research and serves as a valuable reference for future studies.