Aderemi Gbadamosi

Mr. Aderemi Gbadamosi

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 September 2024 in Construction and Building Materials
Verified
Journal Article
Closed access
NGNader Ghafoori
Nader Ghafoori
AGAderemi Gbadamosi
Aderemi Gbadamosi
RMRumman Mim
Rumman Mim

25 December 2024 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
NGNader Ghafoori
Nader Ghafoori
MMMatthew O. Maler
Matthew O. Maler
MNMeysam Najimi
Meysam Najimi
RMRumman Mim
Rumman Mim
AGAderemi Gbadamosi
Aderemi Gbadamosi
Properties of high early-strength concretes (HESCs) containing Type V, Type III, and rapid hardening calcium sulfoaluminate (CSA) cements were investigated at curing ages of opening time, 24 h, and 28 days. Investigated properties included the fresh (workability, setting time, air content, unit weight, and released heat of hydration), mechanical (compressive and flexural strengths), transport (absorption, volume of permeable voids, water penetration, rapid chloride permeability, and accelerated corrosion resistance), dimensional stability (drying shrinkage), and durability (de-icing salt and abrasion resistance) properties. Test results revealed that the HESC containing Rapid-Set cement achieved the shortest opening time to attain the required minimum strength, followed by Type III and Type V cement HESCs. For the most part, Type V cement HESC produced the best transport and de-icing salt resistance, whereas Rapid-Set cement HESC displayed the best dimensional stability and wear resistance.

3 November 2021 in Journal of Engineering Research and Reports
Verified
Journal Article
Closed access
PDF file
AGAderemi Gbadamosi
Aderemi Gbadamosi
OAOgunsuyi Raphael Abidemi
Ogunsuyi Raphael Abidemi
OFOjo Meshach Felix
Ojo Meshach Felix
With the rapid economic growth and continuously increased consumption, a large amount of glass waste materials is generated; this study investigated the effect of crushed waste glass as filler and also as an aggregate in the asphalt binder course. It compares the glassphalt mix with the specification range at different percentages to meet specifications limit according to Nigeria roads and bridges reverse book of 1997 Waste glass are cleaned and crushed from the glass bottles and added to the asphalt as a filler and as a replacement for coarse aggregates, the marshal method is used to determine the optimum bitumen content and evaluate the properties of the asphalt mix. However, 24 samples were prepared in total, 12 samples each for the asphalt mix used to determine the optimum bitumen content and the other 12 samples for the glassphalt mix used to find out the effect of adding the different percentages of crushed waste glass to the asphalt mixture. The Marshall test carried out on the asphalt mixtures showed that the optimum bitumen content of bitumen was found out to be 6.2% of the asphalt mix by weight. Also, Marshall Test carried out on the glassphalt mix showed the optimum percentage of glass used in the binder course of the weights of aggregates in the asphalt mix. The result of this experiment is been checked to be consistent with the Nigeria road and bridges reverse book of 1997, i.e. Marshall Stability, flow, bulk density, and air voids.

1 July 2024 in Materials
Verified
Journal Article
Open access
PDF file
NGNader Ghafoori
Nader Ghafoori
AGAderemi Gbadamosi
Aderemi Gbadamosi
HDHamidou Diawara
Hamidou Diawara
AHAriful Hasnat
Ariful Hasnat
The study presented herein was intended to (1) compare the optimum (minimum) dosage requirements of four different sources of polycarboxylate-based high-range water-reducing admixtures (HRWRAs) and viscosity-modifying admixtures (VMAs) in attaining slump flows of 508 mm, 635 mm, and 711 mm, and a visual stability index (VSI) of 0 (highly stable concrete) or 1 (stable concrete), and (2) assess the flowability/viscosity, stability, passing ability, and filling ability of the resulting self-consolidating concretes. The test results showed that the optimum dosage requirements to obtain a uniform slump flow and visual stability index varied among the four selected admixture sources. The required dosage amount for HRWRAs was highest for the polycarboxylate-ester (PCE) type and lowest for the polycarboxylate-acid (PCA) type. Acceptable flowability plastic viscosity dynamic and static stability, passing ability, and filling ability of self-consolidating concrete can be achieved with the proper dosing of the four studied admixture sources.

2 August 2026 in Construction and Building Materials
Verified
Journal Article
Closed access
AGAderemi Gbadamosi
Aderemi Gbadamosi
NGNader Ghafoori
Nader Ghafoori

1 July 2024
Verified
Conference Paper
Closed access
NGNader Ghafoori
Nader Ghafoori
AGAderemi Gbadamosi
Aderemi Gbadamosi
AHAriful Hasnat
Ariful Hasnat
This study investigates the properties of paste, mortar, and concrete made with three distinct fly ash types (traditional, harvested, and blended) replacing 20% of Portland cement, aiming to bridge the gap between supply and consumption of traditional fly ash. The investigated properties included rapid chloride penetration. compressive strength, drying shrinkage, absorption, permeable voids, surface resistivity, resistance to sulfate attack and wear. The cementitious mixtures containing fly ash consistently exhibited superior performance, compared to the reference mixture across all properties examined in this study. Amongst the three fly ash types, the mixtures containing traditional fly ash produced best short, medium and long-term properties. The mixtures containing harvested and blended fly ash exhibited comparable performance between each other, and in certain instances, one outperformed the other.