In order to study the effects of kink-like defects in twin boundaries on deformation mechanisms and interaction between dislocations and defects in twin boundaries under localized load, nanotwinned Cu with two defective twin (TDT) boundaries is compared with the nanotwinned Cu with two perfect twin (TPT) boundaries, and nanotwinned Cu with single defective twin (SDT) boundary and single perfect twin boundary by simulating spherical nanoindentations using molecular mechanics. The indenter force-depth and hardness-contact strain responses were analyzed. Results show that the existence of intrinsic defects in twin boundary could reduce the critical load and critical hardness of nanotwinned material. A quantitative parameter was first proposed to evaluate the degree of surface atom accumulation around the indenter during nanoindentation, and it can be inferred that the surface morphology in TDT changes more frequently than the surface morphologies in TPT and SDT. The atomistic configurations of incipient plastic structures of three different models were also analyzed. We found that the intrinsic defects in twin boundary will affect the incipient plastic structures. The formation of twinning partial slip on the defective twin boundary happens before the contact of the dislocation and twin boundary. The kink-like defects could introduce Frank partial dislocation to the twin boundary during interaction between dislocation and twin boundary, which was not detected on the perfect twin boundary. In addition, the area of twinning partial slips on the upper twin boundary in the incipient plastic structures in SDT and TDT are larger than the twinning partial slip area in TPT, which results in the reduction of the critical hardness in SDT and TDT. The kink-like defects could also block the expansion of twinning partial slip on the twin boundary. Furthermore, we investigated the dislocation transmission processes in three different models. It is found that the dislocation transmission event could be delayed in model containing single defective twin boundary, while the transmission process could be advanced in model containing two consecutive defective twin boundaries. The quantitative analysis of dislocation length was also implemented. Result shows that the main emitted dislocation during nanoindentation is Shockley partial, and the dislocation nucleation in SDT and TDT is earlier than the dislocation nucleation in TPT due to the existence of defects. It is inferred that the intrinsic defects on twin boundaries could enhance the interaction between dislocations and twin boundaries, and could strongly change the structure evolution and promote the dislocation nucleation and emission. These findings about kink-like defects in twin boundaries show that the inherent kink-like defects play a crucial role in the deformation mechanisms and it should be taken into consideration in future investigations. Single defective twin boundary structure is recommended to delay the transmission and block the expansion of twin boundary migration. Some of the results are in good agreement with experiments.
Nanoindentation on a platinum thin film with surface defects in a rectangular shape and triangular shape was simulated using the quasicontinuum method to study the shape effect of surface defects on nanohardness. The results show that the nanohardness of thin film with triangular defects is basically larger than those with rectangular defects, which is closely related to the height of the surface defects at the boundary near to the indenter. Moreover, the triangular defect might have an enhancement effect on nanohardness by a certain size of the defects and the boundary orientation of the defect, where such an enhancement effect increases as the defect grows. Furthermore, the nanohardness decreases when the defect is folded from wide to narrow in the same atom cavity, and particularly expresses a more obvious drop when the height of the defects increases. In addition, larger sizes of the rectangular defect induce more reduction in nanohardness, while the nanohardness of the triangular surface defect is sensitive to the periodic arrangement of atoms changed by the boundary orientation of the defect, which is well explained and demonstrated by the calculation formula theory of necessary load for dislocation emission.
Microscopic properties of nanocrystal aluminum thin film have been investigated using the quasicontinuum method in order to study the influence of surface defects in nanoindentation. Various distances between the surface defect and indenter have been taken into account. The results show that as the distance between the pit and indenter increases, the nanohardness increases in a wave pattern associated with a cycle of three atoms, which is closely related to the crystal structure of periodic atoms arrangement on {1 1 1} atomic close-packed planes of face-centered cubic metal; when the adjacent distance between the pit and indenter is more than 16 atomic spacing, there is almost no effect on nanohardness. In addition, the theoretical formula for the necessary load for elastic-to-plastic transition of Al film has been modified with the initial surface defect size, which may contribute to the investigation of material property with surface defects.
We utilized numerical methods to analyze the characteristics of the piston-cylinder assembly of a controlled-clearance piston gauge. The piston gauge was able to measure liquid pressure from 100 MPa to 1500 MPa with the relative expanded uncertainty of 0.02% (k = 3). We established a finite element model to solve the stress and strain of the structural problem. The effective areas were calculated based on Dadson’s formula using the converged solutions of the clearance and the pressure distribution within the distorted piston-cylinder engagement gap that were iteratively determined by the finite element model and a fluid mechanics model with pressure-dependent fluid’s properties. Results were compared to the effective areas calculated by the modified Heydemann–Welch model based on experimental data, and the relative differences were less than 0.02%. We found sharp declines of the clearance and pressure distribution near the exit of the piston-cylinder engagement gap, which may lead to wearing during long-time operation at high pressures. Numerical results indicated non-linear relationship between jacket pressure and the cubic root of piston fall speed, which was traditionally considered as linear. The stall jacket pressure obtained by cubic (instead of linear) fitting extrapolation was found more close to the ones determined directly by the finite element model. Numerical results also found non-linear relationships among jacket pressure, measuring pressure, jacket pressure distortion coefficient.
Microscopic properties of nanocrystal Aluminum thin film have been simulated using the quasicontinuum method in order to study the surface defect influence in nanoindentation. Various distances between the surface defect and indenter have been taken into account. The results show that as the distance between the pit and indenter increases, the nanohardness increases in a wave pattern associated with a cycle of three atoms, which is closely related to the crystal structure of periodic atoms arrangement on {111} atomic close-packed planes of face-centered cubic metal; when the adjacent distance between the pit and indenter is more than 16 atomic spacing, there is almost no effect on nanohardness. In addition, the theoretical formula for the necessary load for the elastic-to-plastic transition of Al film has been modified with the initial surface defect size, which may contribute to the investigation of material properties with surface defects.