The synergistic effect of 2-chloromethylbenzimidazole (2-CBI) and potassium iodide (KI) for mild steel in 1 M hydrochloric acid solution was investigated by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). The results showed that, with the addition of 100 ppm potassium iodide, the inhibition efficiecy (IE) of 100 ppm 2-CBI in 1 M hydrochloric acid had been improved from 91.14% to 96.15%. And synergistic parameter of 100 ppm 2-CBI with different amounts of potassium iodide is always greater than 1. The adsorption of potassium iodide combining with 100 ppm 2-CBI obeys to the Langmuir adsorption isotherm. Thermodynamic adsorption parameters, including ΔG0ads, ΔHa and ΔSa of the adsorption of the combinned inhibitor, as well as the Ea of the mild steel corrosion in 1 M HCl with the combinned inhibitor, were calculated.
1 September 2021 in Russian Journal of Electrochemistry
—Corrosion behavior of mild steel in 1 mol/L HCl with 2-chloromethylbenzimidazole (2-CBI) and sodium molybdate (Na2MoO4) as inhibitor was studied by using electrochemical impedance spectroscopy and potentiodynamic scanning. 2-CBI was proved an effective inhibitor for mild steel in 1 mol/L HCl, while Na2MoO4 did not. With a fixed 2-CBI concentration (100 mg/L) and increasing of Na2MoO4 concentration (50 to 300 mg/L), the inhibition efficiency (IE) of the 2-CBI/Na2MoO4 complex increased first and then decreased, and the synergistic parameters of the complex were always higher than 1. When the concentration of Na2MoO4 approaches to 150 mg/L, the IE of the complex showed a maximum value as 89.0%, which was higher than that of only 100 mg/L 2-CBI as inhibitor (81.8%). This result is considered as a compelling support for understanding the mechanism of the synergistic inhibition.
The leaching concentration of alkaline ions plays a crucial role in the efficiency of the CO2 mineralization reaction in fly ash. The multi-scale structural characteristics of micro–nano pores in fly ash are the primary factors that control the leaching and diffusion rate of alkaline ions. However, the existing theoretical models do not account for the multi-scale pore structure, leading to challenges in accurately describing the ion diffusion in fly ash and predicting the reaction rate and efficiency of CO2 mineralization. To address this issue, a multi-scale dynamic diffusion model of ions was developed based on the micro–nano pore structure of fly ash. This model established the relationship between the ionic leaching rate and pore structure, as well as macroscopic changes over time, which were validated through experiments. Mineralization experiments with varying soaking times and uniaxial compression experiments on mineralized specimens were conducted to investigate the relationships among soaking time, ion leaching concentration, mineralization degree, and mechanical strength. The results elucidated the impact of alkaline ion concentration on the mineralization degree and mechanical strength of fly ash materials, offering theoretical insights to enhance mineralization and material properties.