Microwave induced thermoacoustic imaging based on compressed sensing (CS) has proved to be a promising imaging method, especially in limited-view problems. However, the construction of the thermoacoustic dictionary in current CS-based methods may not be feasible for the real-world application due to the long construction time and large memory consumption. To address the cumbersome dictionary construction problem in the CS-based method, we propose an efficient solution by simplifying the forward solution of the wave equation which enables a fast calculation of the thermoacoustic dictionary through a time-shifting operation. In addition, by combining the temporal sparsity of the thermoacoustic signal, the dictionary can be compressed, resulting in a significant memory saving. We validated the proposed dictionary construction method using CS-based reconstruction by imaging numerical, biological phantoms and ex-vivo breast tissue and compared the image quality with the state-of-the-art reconstruction methods. A good image quality, fast construction time, and economical memory consumption demonstrate the potential of the proposed dictionary construction method in CS-based reconstruction for the real-world application.
1 March 2024 in IEEE Transactions on Intelligent Transportation Systems
The GNSS/INS integrated navigation system is widely used in intelligent vehicles. Due to the vulnerability of GNSS and the low accuracy of low-cost inertial devices, the performance of dead reckoning during GNSS outages is of great concern. The non-holonomic constraint (NHC) is a widely used method to improve dead reckoning performance, but it ignores the sideslip effect caused by tire deformation, which leads to performance degradation. The conventional vehicle dynamics model can achieve higher accuracy by modeling tire sideslip effects; however, its parameters are often complex and challenging to obtain. This work proposes a novel wheel velocity predictor (WVP) based on the vehicle dynamics model, which models tire sideslip effects while having concise and easy-to-estimate parameters. Based on this model, an integrated navigation system is proposed, which can adaptively estimate WVP parameters when GNSS is available and use the additional information from trained WVP to improve navigation performance during GNSS outages. Notably, the proposed system utilizes a more accurate model than conventional NHC while avoiding requiring additional sensors or complex prior vehicle dynamics model parameters. Field experiments have shown that the proposed scheme can accurately estimate the tire sideslip angle in real-time and significantly improve dead reckoning performance compared with the NHC-based method. Furthermore, as part of the WVP parameters, the inertial measurement unit mounting angles can be estimated even with a non-straight driving trajectory. Compared with the NHC-based method, which requires a straight driving trajectory to converge, the application limitation is significantly relaxed.
1 January 2012 in Progress In Electromagnetics Research
A wideband circularly polarized (CP) antenna with conical-beam radiation is designed by a circular monopolar patch antenna (CMPA) with a tapered feeding, eight shorting pins, and eight sickle-shaped branches in the ground plane. Firstly, the TM01 and TM02 modes and the sickle-shaped branches are presented to generate the radiated θ-polarization and φ-polarization components, respectively. Secondly, a tapered feeding probe with a larger radius is then employed to reduce the input resistance and improve the impedance matching of this antenna fed at the center. Therefore, the proposed antenna has a 10dB impedance bandwidth of 46.8% and a 3dB axial ratio (AR) bandwidth of 36.7%. Consequently, the attractive performance of the antenna with high impulse signal fidelity (97.4%) demonstrates its capacity for impulse-radio ultra-wideband (IR-UWB) positioning applications in a multipath interference environment.
17 August 2021 in IEEE Geoscience and Remote Sensing Letters
This letter is dedicated to develop an effective high-frequency method for the near-field (NF) scattering from an electrically large ship illuminated by a Hertzian dipole. First, for primary illumination, a local expansion technique based on the facets of the target is introduced to account the NF scattering, which has a singularity-free characteristic. Second, for secondary rays, the ray-generation technique on the sphere grid is proposed to reduce the number of ray tubes. And the ray-tracing strategy based on one central ray is proposed to accelerate the tracing process, which benefits to the parallelism by utilizing the graphics processing unit (GPU). Therefore, it is particularly attractive since the proposed method requires very little increase in computational cost and yields a good accuracy in the NF scattering computation of an electrically large ship problem.
In many real-time kinematic (RTK) positioning applications, reference observations are transmitted over wireless links that can experience frequent interruptions or substantial delays. This results in large differential ages between base and rover observations, which, in turn, leads to a deterioration in positioning performance. To bridge the significant age difference, in this work, we propose a simple and effective scheme for modeling and compensating for such errors. Firstly, the overall differential age error was modeled using truncated Taylor expansion. Then, a time-differenced carrier phase (TDCP)-based observation model was established to estimate the errors with the Kalman framework. Since estimating the receiver’s clock error is unnecessary, equivalent transformation and sequential filtering technology were adopted to significantly reduce the computational complexity. Furthermore, a predictor performance monitor was introduced to mitigate the integrity risks that may occur due to model mismatches. The effectiveness of this scheme was validated by static and dynamic field experiments. The static experiment results showed that when the differential age was 60 s, the GPS and BDS satellites’ overall root mean square error (RMSE) with the asynchronous RTK (ARTK) prediction method was 2.8 and 5.5 times that of the proposed method, respectively. Moreover, when the differential age was 120 s, these values were 3.3 and 5.4 times that of the proposed method, respectively. The field experiment results showed that when the differential age was 60 s, the integer ambiguity fixed rate and false fixed rate of the ARTK method were 0.90 and 1.63 times that of the proposed method, respectively. Finally, at a 120 s differential age, these values were 0.78 and 4.78 times that of the proposed, respectively.