Francisco Carlos Carneiro Soares Salomão

Dr. Francisco Carlos Carneiro Soares Salomão

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 January 2024 in Surfaces and Interfaces
Verified
Journal Article
Closed access
MFMaryana Melo Frota
Maryana Melo Frota
KMKelvi Miranda
Kelvi Miranda
VMVitória Souza Marques
Vitória Souza Marques
TMThaiz Batista Azevedo Rangel Miguel
Thaiz Batista Azevedo Rangel Miguel
AMAdriano Mattos
Adriano Mattos
LVLucicléia Barros de Vasconcelos
Lucicléia Barros de Vasconcelos

1 January 2024 in Materials Research
Verified
Journal Article
Open access
PDF file
MMMilena Jacinto da Silva M Moura
Milena Jacinto da Silva M Moura
RVR. B. Vasques
R. B. Vasques
MLM. M. Levy
M. M. Levy
SMS. J. M. Magalhães
S. J. M. Magalhães
Caio Victor Pereira PascoalCaio Victor Pereira Pascoal
Caio Victor Pereira Pascoal
WAWalney SILVA Araujo
Walney SILVA Araujo
L-histidine was analyzed in this work as a corrosion inhibitor for AISI 1018 carbon steel in chloride solution, without (pH 7) and with carbon dioxide saturation (pH 4). Mass loss methods and electrochemical tests were used. In a medium with pH 4 saturated with CO2, the inhibition efficiency values (IE%) did not reach 34%. For the pH 7 condition, an inhibition efficiency of up to 89% was observed. The values corroborated with the quantum chemistry and Density Functional Theory (DFT) calculations, showing that the histidine molecule is responsible for the excellent inhibition potential. A Fourier transform infrared spectroscopy (FTIR) study and a thermogravimetric study (TGA) of the amino acid were also carried out. The substrate surface was analyzed by scanning electron microscopy and atomic force microscopy.

24 February 2025 in Molecules
Verified
Journal Article
Open access
PDF file
Caio Victor Pereira PascoalCaio Victor Pereira Pascoal
Caio Victor Pereira Pascoal
LSLucas Renan Rocha Da Silva
Lucas Renan Rocha Da Silva
MFMAURO ANDRES CERRA FLOREZ
MAURO ANDRES CERRA FLOREZ
TCThiago Roberto Felisardo Cavalcante
Thiago Roberto Felisardo Cavalcante
Julian AvilaJulian Avila
Julian Avila
WAWalney SILVA Araujo
Walney SILVA Araujo
The inhibitory performance of three distinct protic ionic liquids (PILs), namely, 2-hydroxyethyl ammonium formate (PIL 01), 2-hydroxyethyl ammonium propionate (PIL 02), and 2-hydroxyethyl ammonium pentanoate (PIL 03), was evaluated to determine their suitability as eco-friendly corrosion inhibitors for carbon steel (ASTM A36) in a 3.5 wt. % NaCl aerated neutral electrolyte solution. Standard corrosion inhibitor assessment methods, including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), weight loss measurements, and microscopic techniques (SEM and optical microscopy), were employed to examine the steel surface and corrosion rate. There is a general agreement that the inhibition efficacy is directly associated with the adsorption capacity of substances on the surface of an investigated material, normally stainless or carbon steel. The standard free energies of adsorption were approximately −22 kJ mol−1, indicating a physical adsorption type of interaction between ionic liquids and the electrode surface. The adsorption behavior of protic ionic liquids on an A36 steel surface conforms to a Langmuir-type isotherm. In conclusion, PIL 01 demonstrated an inhibition efficiency exceeding 80%, while PILs 02 and 03 exhibited efficacies in the 50–60% range. The inhibition efficiency was observed to be proportional to the inhibitor’s concentration. These results suggest that PIL 01, PIL 02, and PIL 03 exhibit significant corrosion inhibition properties.

2 August 2024 in Crystals
Verified
Journal Article
Open access
PDF file
MMMilena Jacinto da Silva M Moura
Milena Jacinto da Silva M Moura
RVRoberta Bastos Vasques
Roberta Bastos Vasques
SMSaulo Jose de Melo Magalhães
Saulo Jose de Melo Magalhães
FAFrancisco Wagner De Queiroz Almeida-Neto
Francisco Wagner De Queiroz Almeida-Neto
PNPedro de Lima Neto
Pedro de Lima Neto
WAWalney SILVA Araujo
Walney SILVA Araujo
The amino acid L-histidine, which has an imidazole ring, was investigated as a corrosion inhibitor for AISI 1018 carbon steel in chloride solution based on the effectiveness of inhibitors containing imidazole in their composition. A neutral environment was chosen for this study due to the scarcity of research on this amino acid in this environment type. Concentrations of 250, 500, and 1000 ppm were evaluated. Various methods were used to determine inhibition effectiveness, including mass loss, open circuit potential, linear potentiodynamic polarization, and electrochemical impedance spectroscopy. For mass loss, the inhibition efficiency varied from 83 to 88% according to the increase in concentration. For the electrochemical tests, the efficiency variation ranged from 62 to 90% with increasing amino acid concentration. Furthermore, a simulation analysis using quantum chemical calculations within the scope of Density Functional Theory (DFT) revealed that histidine’s nucleophilic character is crucial for its corrosion inhibitory capacity in an aqueous medium at pH 7. The inhibition efficiency increased with increasing concentration in a neutral medium, following the Langmuir isotherm for the adsorption of L-histidine. Additional studies were carried out using Fourier transform infrared spectroscopy (FTIR) and thermogravimetry (TGA). Analysis of the substrate surface by scanning electron microscopy (SEM) showed greater preservation with the addition of L-histidine, confirming its adsorption on the steel. Atomic Force Microscopy (AFM) also demonstrated an improvement in surface roughness in the presence of amino acids compared to the medium without an inhibitor.

21 January 2026 in Langmuir
Verified
Journal Article
Open access
Caio Victor Pereira PascoalCaio Victor Pereira Pascoal
Caio Victor Pereira Pascoal
MFMauro Andres Cerra Florez
Mauro Andres Cerra Florez
FSFrancisco Carlos Carneiro Soares Salomão
Francisco Carlos Carneiro Soares Salomão
EBEduardo Bedê Barros
Eduardo Bedê Barros
RPRegiane Silva Pinheiro
Regiane Silva Pinheiro
WAWalney SILVA Araujo
Walney SILVA Araujo
This study presents an evaluation of the corrosion inhibition behavior of three protic ionic liquids (PILs), 2-hydroxy diethanolamine formate (PIL A: 2-HDEAF), 2-hydroxy diethanolamine propionate (PIL B: 2-HDEAP), and 2-hydroxy diethanolamine pentanoate (PIL C: 2-HDEAPe), on A36 carbon steel in a chloride electrolyte (3.5 wt % NaCl). The emphasis was converged on elucidating interfacial adsorption, film formation, and surface chemistry that reinforce inhibitor efficacy. A complementary set of electrochemical and surface techniques, including weight loss measurements, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), optical microscopy, field-emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM), was employed to evaluate the electrochemical response and characterize the inhibitor-modified steel surfaces. X-ray diffraction (XRD) was used to perform an identification of the main phases of corrosion products and adsorbed films. The adsorption behavior was quantitatively evaluated using several adsorption isotherm models, including Langmuir, Temkin, and Freundlich. Among them, the Frumkin isotherm provided the best description of the experimental data, yielding an average standard free energy of adsorption (ΔG°ad) of -20.89 kJ mol-1, which is indicative of predominantly physical adsorption at the steel/electrolyte interface. Among the PILs studied, PIL A exhibited the highest inhibition efficiency (>75%) and promoted the formation of a dense, protective interfacial film, whereas PILs B and C showed progressively lower performance. Inhibition efficiency correlated positively with inhibitor concentration and followed the trend PIL A > PIL B > PIL C. Surface morphologies demonstrated significant mitigation of chloride damage in the presence of PILs, consistent with electrochemical results. XRD analysis revealed the stabilization of surface films (iron oxides and oxyhydroxides), including goethite, which are indicative of altered interfacial reactions in the inhibited systems. These results accentuate the importance of interfacial adsorption evaluation and film formation mechanisms in governing corrosion inhibition performance, highlighting the potential of tailored PILs for surface protection in chloride-containing media.

7 May 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
MSMatheus de Matos Dourado Simões
Matheus de Matos Dourado Simões
CSCaren Nádia Soares de Sousa
Caren Nádia Soares de Sousa
FOFátima de Cássia Evangelista Oliveira
Fátima de Cássia Evangelista Oliveira
JCJuliane Aparecida Crispin Carlos
Juliane Aparecida Crispin Carlos
RNRenan dos Santos Nogueira
Renan dos Santos Nogueira
LSLia Lira O. Sanders
Lia Lira O. Sanders
The physicochemical properties of highly diluted homeopathic preparations remain insufficiently characterized. This study investigated particulate features in Kali carbonicum (K₂CO₃) at 50-millesimal potencies (LM4–LM7), a scale in which each step corresponds to a 1:50,000 dilution. It explored associated plasma proteomic changes in a randomized, placebo-controlled N-of-1 trial. Dynamic light scattering revealed heterogeneous, polydisperse particle populations with low zeta potentials, while scanning electron microscopy identified nanoparticles (~67 nm) in LM4. Atomic force microscopy showed that Kali samples exhibited more compact dendritic assemblies than lactose controls, suggesting that initial trituration influences self-organization. Raman spectroscopy of LM7 detected carbonate-associated bands absent in controls. Plasma proteomics revealed an exploratory signature during Kali exposure, including increased S100A9 abundance, enrichment of immune-related pathways, and reduced exosome-associated proteins. These findings suggest that structured nanometric assemblies may be associated with measurable systemic changes.