The world is currently facing a drinking water problem. Human activity, climate change and pollution of existing water bodies are exacerbating the problem. The scientists around the world are currently trying to purify water using effective and inexpensive methods. One such method is membrane distillation. Membrane distillation is a versatile thermally driven membrane separation process. This method of water purification has the potential to remove salts and other non-volatile components. The work is concerned with the desalination of salt solutions by membrane distillation using ion-track membranes based on polyethylene terephthalate (PET). PET ion-track membranes (PET TMs) were modified by photoinitiated graft polymerization of 2,2,3,3,4,4,4-heptafluorobutyl methacrylate (HFBMA) to make them hydrophobic. Optimal polymerization conditions (monomer concentration, reaction time) were determined, which led to an increase of water CA from 51 to 105°. The obtained membranes were used to purify the solution from NaCl. The effect of salt concentration as well as membrane properties on performance and degree of purification was studied. The results show that large pore size PET TMs modified with HFBMA has the potential to desalinate water in an efficient manner.
In this work, the surfaces of poly (ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670–1310 nm were hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerization. Attenuated total reflection FTIR spectroscopy (ATR-FTIR), scanning electron microscopy (SEM) coupled to an energy-dispersive X-ray spectrometer (EDX), and contact angle measurements were used to identify and characterize the TeMs. The optimal parameters for graft polymerization were determined as follows: polymerization time of 60 min, monomer concentration of 30%, and distance from the UV source of 7 cm. The water contact angle of the modified membranes reached 97°, which is 51° for pristine membranes. The modified membranes were tested for water desalination using direct contact membrane distillation (DCMD) method. The effects of membrane pore size, the degree of grafting, and salt concentration on the performance of membrane distillation process were investigated. According to the results obtained, it has been concluded that large pore size hydrophobic TeMs modified by using DFHA could be used for desalinating water.
Composite membranes combining PET track-etched membranes, PVC nanofibers, and HKUST-1 were developed, showing stable performance and regeneration ability, highlighting their potential as promising materials for sustainable CO2 capture.
In this work, the surface of poly(ethylene terephthalate) track-etched membranes (PET TeMs) with pore sizes of 670-1310 nm was hydrophobized with 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptyl acrylate (DFHA) by photoinitiated graft polymerization. Attenuated total reflection FTIR spec-troscopy (ATR-FTIR), scanning electron microscopy (SEM) coupled to an energy-dispersive X-ray spectrometer (EDX), and contact angle measurement were used to identify and characterize the TeMs. The optimal parameters for graft polymerization were determined as follows: polymeriza-tion time 60 min, monomer concentration of 30% and distance from the UV-source 7 cm. The wa-ter contact angle of the modified membranes reached 97° which is 51o for pristine membranes. The modified membranes were tested for water desalination using direct contact membrane distillation (DCMD) method. The effect of membrane pore size, the degree of grafting and salt concentration on the performance of membrane distillation process was investigated. According to the results obtained, it has been concluded that large pore size hydrophobic TeMs modified by using DFHA could be used for desalinating water.
21 September 2025 in Eurasian Journal of Chemistry
Track-etched membranes (TMs), characterized by their precisely controlled pore size, geometry, and distribution, offer a promising platform for the development of advanced membrane systems and serve as model membranes for testing and optimizing surface modification techniques. This study presents a perspective modification of poly(ethylene terephthalate) track-etched membranes (PET TM) based on photo-induced graft polymerization of allylamine (AlAm) to introduce primary amine groups on the membrane surface. The polymerization process was optimized by evaluating key parameters, including reaction time, monomer concentration, solvent, and distance from UV-lamp. Optimal conditions for photoinduced graft polymerization were found: grafting time 60 minutes, AlAm monomer concentration 50 %, 2-propanol as a solvent and distance to UV lamp 10 cm. These parameters allowed effective modification of the polymer while maintaining the integrity of the membrane porous structure. The modified membranes were characterized using SEM-EDX, ATR FTIR, and UV-spectroscopy. The results demonstrate the successful fabrication of membranes with a high amino group content (up to 10.6±0.3 µmol/g) while preserving their porous structure. This functionalization enhances the practical potential for the environment and biomedical fields.