The presented research aimed at finding new ways to value hemp by-products (stalks) from the cannabidiol industry through thermochemical conversion. Chemical and elemental composition of hemp biomass was investigated by successive chemical extractions and Scanning Electron Microscopy along with Energy-dispersive X-ray Spectroscopy. Proximate and elemental analyses completed the chemical characterization of the hemp biomass and its biochar. Thermogravimetric analysis of the hemp biomass allowed to understand its kinetic of decomposition during thermal conversion. The carbon structure and porosity of the biochar were assessed by Raman spectroscopy and CO2 gas adsorption. Properties of interest were the energy production measured through calorific values, and the electrical conductivity. Two ways of valorisation of the hemp biomass were clearly identified, depending mainly on the chosen pyrolysis temperature. Hemp biochar carbonized at 400–600°C were classified as lignocellulosic materials with a good potential for solid biofuel applications. Specifically, the resulting carbonized biochar presented low moisture content (below 2.50%) favourable for high fuel quality, low volatile matter (27.1–10.4%) likely to show lower particle matter emissions, limited ash content (6.8–9.8%) resulting in low risk of fouling issues during the combustion, high carbon content (73.8–86.8%) suggesting strong energy density, associated with high higher heating values (28.45–30.95 MJ kg−1). Hemp biochar carbonized at 800–1000 °C displayed interesting electrical conductivity, opening opportunities for its use in electrical purposes. The electrical conductivity was related to the evolution of the biochar microstructure (development of graphite-like structure and changes in microporosity) in regard with the thermochemical conversion process parameters. Graphical abstract
Advanced imaging techniques can noninvasively characterise, monitor, and evaluate how conservation treatments affect cultural heritage objects. In this specific field, hyperspectral imaging allows nondestructive characterisation of materials by identifying and characterising colouring agents, binders, and protective coatings as components of an object’s original construction or later historic additions. Furthermore, hyperspectral imaging can be used to monitor deterioration or changes caused by environmental conditions. This paper examines the potential of hyperspectral imaging (HSI) for the evaluation of heritage objects. Four cameras operating in different spectral ranges were used to nondestructively scan a beehive panel painting that originated from the Slovene Ethnographic Museum collection. The specific objective of this research was to identify pigments and binders present in the samples and to spatially map the presence of these across the surface of the art piece. Merging the results with databases created in parallel using other reference methods allows for the identification of materials originally used by the artist on the panel. Later interventions to the original paintings can also be traced as part of past conservation campaigns.
Fires can have a negative impact on the environment, human health, property and ultimately also on various objects of cultural heritage (CH). This paper deals with an investigation into the degradation of selected proteinaceous paint layers that were exposed to fire-related effects (i.e., fire effluents and/or high temperatures) in a modified cone-calorimeter system. Paint layers of egg yolk adhesive (E) and lead white tempera (E + LW) were exposed to fire-related impacts on top of a CH stack and in a specially designed CH test chamber. On the CH stack, the proteinaceous paint layers were exposed to fire effluents and high temperatures, while in the CH test chamber, the samples were exposed mainly to fire effluents. The molecular changes to the exposed paint layers were analysed by invasive and non-invasive spectroscopic analyses (i.e., FTIR and Raman spectroscopy) and complimented with pyrolysis-GC–MS, while the colour changes were evaluated using colourimetry. It was concluded that the proteinaceous binder degrades into aromatic amino acids and/or fatty acids after exposure to the overall impacts of the fire. Aromatic amino acids were detected by means of the FTIR and py-GC–MS analyses. In the case of the lead white tempera exposure, partial dissociation of the lead white pigment was confirmed by the detection of alteration products, such as lead oxide and lead carbonate. Moreover, the investigation of the E + LW samples exposed for longer times revealed the presence of lead carboxylates. On the other hand, no significant molecular changes were observed with the CH samples exposed to fire effluents in the CH test chamber. The research offered us an insight into the fire-induced effects on selected paints for the first time.