Janez Kosel

Dr. Janez Kosel

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2019 in Ultrasonics Sonochemistry
Verified
Journal Article
Open access
JKJanez Kosel
Janez Kosel
AŠAndrej Šinkovec
Andrej Šinkovec
MDMatevž Dular
Matevž Dular
Refining of cellulose pulp is a critical step in obtaining high quality paper characteristics, however, this process is slow and costly especially for refining longer conifer fibers which are the preferred source for high quality paper production and give the paper its strength. In this study, we have applied a novel rotation generator of hydrodynamic cavitation for refining conifer rich pulp samples. Our results show that the device is capable of generating intense shear forces and multiple zones of developed cavitation and is successful in increasing the drainage rate of high consistency pulp (3%). The paper produced by means of the obtained pulp has higher quality because of its higher tensile index (50.5 kN m kg-1) and burst index (3 kPa m2 g-1). These physical parameters were sufficient for newsprint paper and other paper/board quality manufacture. In addition, this laboratory scale rotation generator proved to be economically efficient in comparison to the routinely employed laboratory beaters. To our knowledge, this is the first example of using hydrodynamic cavitation for the refinement of softwood fiber pulp of standard industrial consistencies (3%).

1 June 2020 in Ultrasonics Sonochemistry
Verified
Journal Article
Open access
JKJanez Kosel
Janez Kosel
MŠMatej Šuštaršič
Matej Šuštaršič
MPMartin Petkovšek
Martin Petkovšek
MZMojca Zupanc
Mojca Zupanc
MSMija Sežun
Mija Sežun
MDMatevž Dular
Matevž Dular
In paper production industry, microbial contaminations of process waters are common and can cause damage to paper products and equipment as well as the occurrence of pathogens in the end products. Chlorine omission has led to the usage of costly reagents and products of lower mechanical quality. In this study, we have tested a rotation generator equipped with two sets of rotor and stator assemblies to generate developed cavitation (unsteady cloud shedding with pressure pulsations) or supercavitation (a steady cavity in chocked cavitation conditions) for the destruction of a persistent bacteria Bacillus subtilis. Our results showed that only supercavitation was effective and was further employed for the treatment of waters isolated from an enclosed water recycle system in a paper producing plant. The water quality was monitored and assessed according to the chemical (COD, redox potential and dissolved oxygen), physical (settleable solids, insolubles and colour intensity) and biological methods (yeasts, aerobic and anaerobic bacteria, bacterial spores and moulds). After one hour of treatment, a strong 4 logs reduction was achieved for the anaerobic sulphate reducing bacteria and for the yeasts; a 3 logs reduction for the aerobic bacteria; and a 1.3 logs reduction for the heat resistant bacterial spores. A 22% reduction in COD and an increase in the redox potential (37%) were observed. Sediments were reduced by 50% and the insoluble particles by 67%. For bacterial destruction in real industrial process waters, the rotation generator of supercavitation spent 4 times less electrical energy in comparison to the previously published cavitation treatments inside the Venturi constriction design.

1 March 2021 in Journal of Cultural Heritage
Verified
Journal Article
Closed access
JKJanez Kosel
Janez Kosel
PRPolonca Ropret
Polonca Ropret

18 February 2021 in Coatings
Verified
Journal Article
Open access
PDF file
JSJakub Sandak
Jakub Sandak
Anna SandakAnna Sandak
Anna Sandak
LLLea Legan
Lea Legan
Klara RetkoKlara Retko
Klara Retko
MKMaša Kavčič
Maša Kavčič
PRPolona Ropret
Polona Ropret
Advanced imaging techniques can noninvasively characterise, monitor, and evaluate how conservation treatments affect cultural heritage objects. In this specific field, hyperspectral imaging allows nondestructive characterisation of materials by identifying and characterising colouring agents, binders, and protective coatings as components of an object’s original construction or later historic additions. Furthermore, hyperspectral imaging can be used to monitor deterioration or changes caused by environmental conditions. This paper examines the potential of hyperspectral imaging (HSI) for the evaluation of heritage objects. Four cameras operating in different spectral ranges were used to nondestructively scan a beehive panel painting that originated from the Slovene Ethnographic Museum collection. The specific objective of this research was to identify pigments and binders present in the samples and to spatially map the presence of these across the surface of the art piece. Merging the results with databases created in parallel using other reference methods allows for the identification of materials originally used by the artist on the panel. Later interventions to the original paintings can also be traced as part of past conservation campaigns.

1 November 2021 in Journal of Cultural Heritage
Verified
Journal Article
Closed access
JKJanez Kosel
Janez Kosel
MKMaša Kavčič
Maša Kavčič
LLLea Legan
Lea Legan
Klara RetkoKlara Retko
Klara Retko
PRPolonca Ropret
Polonca Ropret

20 August 2018 in Australian Journal of Grape and Wine Research
Verified
Journal Article
Closed access
PDF file
JKJanez Kosel
Janez Kosel
PRP. Raspor
P. Raspor
Neža ČadežNeža Čadež
Neža Čadež