The reliable and accurate indoor pedestrian positioning is one of the biggest challenges for location-based systems and applications. Most pedestrian positioning systems have drift error and large bias due to low-cost inertial sensors and random motions of human being, as well as unpredictable and time-varying radio-frequency (RF) signals used for position determination. To solve this problem, many indoor positioning approaches that integrate the user’s motion estimated by dead reckoning (DR) method and the location data obtained by RSS fingerprinting through Bayesian filter, such as the Kalman filter (KF), unscented Kalman filter (UKF), and particle filter (PF), have recently been proposed to achieve higher positioning accuracy in indoor environments. Among Bayesian filtering methods, PF is the most popular integrating approach and can provide the best localization performance. However, since PF uses a large number of particles for the high performance, it can lead to considerable computational cost. This paper presents an indoor positioning system implemented on a smartphone, which uses simple dead reckoning (DR), RSS fingerprinting using iBeacon and machine learning scheme, and improved KF. The core of the system is the enhanced KF called a sigma-point Kalman particle filter (SKPF), which localize the user leveraging both the unscented transform of UKF and the weighting method of PF. The SKPF algorithm proposed in this study is used to provide the enhanced positioning accuracy by fusing positional data obtained from both DR and fingerprinting with uncertainty. The SKPF algorithm can achieve better positioning accuracy than KF and UKF and comparable performance compared to PF, and it can provide higher computational efficiency compared with PF. iBeacon in our positioning system is used for energy-efficient localization and RSS fingerprinting. We aim to design the localization scheme that can realize the high positioning accuracy, computational efficiency, and energy efficiency through the SKPF and iBeacon indoors. Empirical experiments in real environments show that the use of the SKPF algorithm and iBeacon in our indoor localization scheme can achieve very satisfactory performance in terms of localization accuracy, computational cost, and energy efficiency.

Most surveillance systems only contain CCTVs. CCTVs, however, provide only limited maneuverability against dynamic targets and are inefficient for short term surveillance. Such limitations do not raise much concern in some cases, but for the scenario in which traditional surveillance systems do not suffice, adopting a fleet of UAVs can help overcoming the limitations. In this paper, we present a surveillance system implemented with a fleet of unmanned aerial vehicles (UAVs). A surveillance system implemented with a fleet of UAVs is easy to deploy and maintain. A UAV fleet requires little time to deploy and set up, and removing the surveillance is also virtually instant. The system we propose deploys UAVs to the target area for installation and perform surveillance operations. The camera mounted UAVs act as surveillance probes, the server provides overall control of the surveillance system, and the fleet platform provides fleet-wise control of the UAVs. In the proposed system, the UAVs establish a network and enable multi-hop communication, which allows the system to widen its coverage area. The operator of the system can control the fleet of UAVs via the fleet platform and receive surveillance information gathered by the UAVs. The proposed system is described in detail along with the algorithm for effective placement of the UAVs. The prototype of the system is presented, and the experiment carried out shows that the system can successfully perform surveillance over an area set by the system.

Lee DK. J Korean Med Assoc. 2017 Jun;60(6):458-467. https://doi.org/10.5124/jkma.2017.60.6.458