Lignin syringyl to guaiacyl ratio (S/G) has long been suspected to have measurable impacts on biochar formation, but these effects are challenging to observe in biochars formed from whole biomass. When the model bioenergy feedstock Populus trichocarpa (cottonwood), with predictable lignin macromolecular structure tied to genetic variation, is used as feedstock for biochar production, these effects become visible. In this work, two P. trichocarpa variants having lignin S/G of 1.67 and 3.88 were ground and pyrolyzed at 700 °C. Water-demineralization of feedstock was used to simultaneously evaluate any synergistic influences of S/G and naturally-occurring potassium on biochar physicochemical properties and performance. The strongest effects of lignin S/G were observed on specific surface area (SBET) and oxygen-content, with S/G of 1.67 improving SBET by 11% and S/G of 3.88 increasing total oxygen content in demineralized biochars. Functional performance was evaluated by breakthrough testing in 1% NH3. Breakthrough times for biochars were nearly double that of a highly microporous activated carbon reference material, and biochar with S/G of 3.88 had 10% longer breakthrough time than its lower S/G corollary. Results support a combination of pore structure and oxygen-functionalities in controlling ammonia breakthrough for biochar.
Bone waste is a problematic slaughterhouse waste typically disposed of in landfills. The pyrolyzed product of this waste shows strong potential in mine and industrial waste water remediation and work is needed to identify chemical and structural parameters which drive performance. Diffuse Reflectance Fourier Transform Spectroscopy (DRIFTS) was used to probe carbonate (CO32−), phosphate (PO43−) and hydroxyl (OH−) environments of mineral phases and functional group chemistry in carbonaceous phase, revealing a potentially synergistic functionality between the two in bone char. CO32− and water substitutions in the mineral lattice were found to persist after pyrolysis to 750 °C, and more soluble non-apatite calcium phosphate phases were observed using second derivative analysis of the v3 PO43− band. Nitrogen-rich functional groups were found in the carbonaceous phase which are associated with complexation of aqueous metals, and ordered aromatic clusters identified by Raman spectroscopy indicate a porous carbon skeletal structure to promote metals adsorption and complexation. These results point to unique chemical and structural features of bone char which are not easily replicated by synthetic carbonated apatite or activated carbon and which contribute to the excellent aqueous metals removal power of bone char. Graphical Abstract
Laser powder bed fusion (LPBF) is an additive manufacturing technique that prints objects layer-by-layer by selectively melting powders using a focused laser. The mechanical properties of LPBF parts are affected by processing parameters that influence the flow within the melt pool. Marangoni convection is a surface tension dependent mass transfer process from the region of lower surface tension to the region of higher surface tension, influenced by temperature and the presence of surface-active elements. The Marangoni convection-induced flow pattern in the molten metal pool can induce different surface characteristics and defects. Tracking the surface oxide particles in the melt pool can be a potential mechanism for assessing the properties of the fabricated parts. Therefore, in this work, a particle tracking algorithm was developed to track the surface oxide particles in a melt pool produced using LPBF. The flow patterns in the melt pool were observed using high-speed camera. Binary images of the melt pool were simulated using MATLAB script based on the experimental observations. The particle tracking algorithm was used for different flow patterns: radially outward, radially inward, and rotational. Various factors affecting the accuracy of the particle tracking algorithm were identified, such as melt pool size, image pixel size, size and number of surface oxides, flow pattern, and particle velocity. The image pixel size, number of surface oxides, and particle velocity were found to have maximum influence on the accuracy. The probability of error has been quantified, and the causes of errors have been explored.