In this study, we perform drop-on-demand (DOD) inkjet printing and laser reductive sintering of precrystallized NiO nanoparticle (NP) ink under ambient conditions to obtain NiO/Ni hybrid electrode patterns on a highly localized area. By formulating an inkjet-printable and laser-reducible NiO NP ink, and by exploring the optimum conditions of inkjet printing parameters, we generate stable droplets, enabling arbitrary shapes of NiO NP dot arrays or line patterns to be deposited. Subsequent short-time low-temperature sintering produces highly crystalline NiO electrodes. Furthermore, laser reductive sintering applied on deposited NiO NP patterns can successfully realize a selective transformation of NiO into Ni electrodes under ambient conditions. Therefore, we can define either NiO or Ni electrodes, or a combination of the two on specific areas with precise amounts of ink. In addition, we identify the characteristics of the synthesized NPs, NP ink, NiO and Ni electrodes using various analytical methods.

Organic-inorganic hybrid perovskite materials have attracted tremendous attention as a key material in various optoelectronic devices. Distinctive optoelectronic properties, such as a tunable energy band position, long carrier diffusion lengths, and high charge carrier mobility, have allowed rapid progress in various perovskite-based optoelectronic devices (solar cells, photodetectors, light emitting diodes (LEDs), and lasers). Interestingly, the developments of each field are based on different characteristics of perovskite materials which are suitable for their own applications. In this review, we provide the fundamental properties of perovskite materials and categorize the usages in various optoelectronic applications. In addition, the prerequisite factors for those applications are suggested to understand the recent progress of perovskite-based optoelectronic devices and the challenges that need to be solved for commercialization.

Optimization of ink-jet printing conditions of quantum-dot (QD) ink by cosolvent process and improvement of quantum-dot light-emitting diodes (QLEDs) characteristics assisted by vacuum annealing were analyzed in this research. A cosolvent process of hexane and ortho-dichlorobenzene (oDCB) was optimized at the ratio of 1:2, and ink-jetting properties were analyzed using the Ohnesorge number based on the parameters of viscosity and surface tension. However, we found that these cosolvents systems cause an increase in the boiling point and a decrease in the vapor pressure, which influence the annealing characteristics of the QD emission layer (EML). Therefore, we investigated QLEDs’ performance depending on the annealing condition for ink-jet printed QD EML prepared using cosolvents systems of hexane and oDCB. We enhanced the quality of QD EML and device performance of QLEDs by a vacuum annealing process, which was used to prevent exposure to moisture and oxygen and to promote effective evaporation of solvent in QD EML. As a result, the characteristics of QLEDs formed using ink-jet printed QD EML annealed under vacuum environment increased luminescence (L), current efficiency (CE), external quantum efficiency (EQE), and lifetime (LT₅₀) by 30.51%, 33.7%, 21.70%, and 181.97%, respectively, compared to QLEDs annealed under air environment.

Drop-on-demand (DOD) electrohydrodynamic (EHD) jet printing uses a nozzle and pulsated electric fields to eject small ink droplets of functional material to the appointed spot of a substrate at the appointed time, which offers solutions of high resolution patterning for fabrication of printed electronics, bioengineering, and display. Because the EHD jet connects fine drops to yield a fine pattern, it is essential to realize high throughput by generating drops quickly and reliably. In this study, the characteristics of jetting frequency were experimentally investigated as a function of nozzle dimensions by measuring response of jetting frequency to pulsating frequency which is varying from 1 Hz to 2000 Hz. The results showed that, even when the nozzle diameter is the same, the other dimensions of the nozzle significantly change the response of jetting to high pulsating frequency. Using a linear damping model describing hydrodynamic motion of ink inside the nozzle, the different behavior of the jetting frequency was explained via the different damping ratio of the oscillating ink: contrary to an underdamped system, an overdamped system supports a jetting frequency higher than the natural frequency.