In this paper, in order to increase the power conversion efficiency we demonstrated the selective growth of “nanoforest” composed of high density, long branched “treelike” multigeneration hierarchical ZnO nanowire photoanodes. The overall light-conversion efficiency of the branched ZnO nanowire DSSCs was almost 5 times higher than the efficiency of DSSCs constructed by upstanding ZnO nanowires. The efficiency increase is due to greatly enhanced surface area for higher dye loading and light harvesting, and also due to reduced charge recombination by providing direct conduction pathways along the crystalline ZnO “nanotree” multi generation branches. We performed a parametric study to determine optimum hierarchical ZnO nanowire photoanodes through the combination of both length-wise growth and branched growth processes. The novel selective hierarchical growth approach represents a low cost, all solution processed hydrothermal method that yields complex hierarchical ZnO nanowire photoanodes by utilizing a simple engineering of seed particles and capping polymer.

Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor‐based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser‐induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat‐sensitive polymer substrates due to the low‐temperature requirements of the process. As a proof of concept, temperature‐sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.

Metal-oxide nanomaterials (MONs) have gained considerable interest in the construction of flexible/wearable sensors due to their tunable band gap, low cost, large specific area, and ease of manufacturing. Furthermore, MONs are in high demand for applications, such as gas leakage alarms, environmental protection, health tracking, and smart devices integrated with another system. In this Review, we introduce a comprehensive investigation of factors to boost the sensitivity of MON-based sensors in environmental indicators and health monitoring. Finally, the challenges and perspectives of MON-based flexible/wearable sensors are considered.

In this work, we report on solution-based p-i-n-type planar-structured CH₃NH₃PbI₃perovskite photovoltaic (PV) cells, in which precrystallized NiO nanoparticles (NPs) without post-treatment are used to form a hole transport layer (HTL). X-ray diffraction and high-resolution transmission electron microscopy showed the crystallinity of the NPs, and atomic force microscopy and scanning electron microscopy confirmed the uniform surfaces of the resultant NiO thin film and the subsequent perovskite photoactive layer. Compared to the conventional poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) HTL, the NiO HTL had excellent energy-level alignment with that of CH₃NH₃PbI₃and improved electron-blocking capability, as analyzed by photoelectron spectroscopy and diode modeling, resulting inV_oc~0.13 V higher than conventional PEDOT:PSS-based devices. Consequently, a power conversion efficiency (PCE) of 15.4% with a high fill factor (FF, 0.74), short-circuit current density (J_sc, 20.2 mA·cm⁻²), and open circuit voltage (V_oc, 1.04 V) having negligible hysteresis and superior air stability has been achieved.

In order to fulfill consumer demand, energy storage may provide flexible electricity generation and delivery. By 2030, the amount of energy storage needed will quadruple what it is today, necessitating the use of very specialized equipment and systems. Energy storage is a technology that stores energy for use in power generation, heating, and cooling applications at a later time using various methods and storage mediums. Through the storage of excess energy and subsequent usage when needed, energy storage technologies can assist in maintaining a balance between generation and demand. Energy storage technologies are anticipated to play a significant role in electricity generation in future grids, working in conjunction with distributed generation resources. The use of renewable energy sources, including solar, wind, marine, geothermal, and biomass, is expanding quickly across the globe. The primary methods of storing energy include hydro, mechanical, electrochemical, and magnetic systems. Thermal energy storage, electric energy storage, pumped hydroelectric storage, biological energy storage, compressed air system, super electrical magnetic energy storage, and photonic energy conversion systems are the main topics of this study, which also examines various energy storage materials and their methodologies. In the present work, the concepts of various energy storage techniques and the computation of storage capacities are discussed. Energy storage materials are essential for the utilization of renewable energy sources and play a major part in the economical, clean, and adaptable usage of energy. As a result, a broad variety of materials are used in energy storage, and they have been the focus of intense research and development as well as industrialization. This review article discusses the recent developments in energy storage techniques such as thermal, mechanical, electrical, biological, and chemical energy storage in terms of their utilization. The focus of the study has an emphasis on the solar-energy storage system, which is future of the energy technology. It has been found that with the current storage technology, the efficiency of the various solar collectors was found to be increased by 37% compared with conventional solar thermal collectors. This work will guide the researchers in making their decisions while considering the qualities, benefits, restrictions, costs, and environmental factors. As a result, the findings of this review study may be very beneficial to many different energy sector stakeholders.