Spodumene concentrate from the Pilbara region in Western Australia was characterized by X-ray diffraction (XRD), Scanning Electron Microscope Energy Dispersive Spectroscopy (SEM-EDS) and Mineral Liberation Analysis (MLA) to identify and quantify major minerals in the concentrate. Particle diameters ranged from 10 to 200 microns and the degree of liberation of major minerals was found to be more than 90%. The thermal behavior of spodumene and the concentration of its polymorphs were studied by heat treatments in the range of 900 to 1050 °C. All three polymorphs of the mineral (α, γ and β) were identified. Full transformation of the α-phase was achieved at 975 °C and 1000 °C after 240 and 60 min treatments, respectively. SEM images of thermally treated concentrate revealed fracturing of spodumene grains, producing minor cracks initially which became more prominent with increasing temperature. Material disintegration, melting and agglomeration with gangue minerals were also observed at higher temperatures. The metastable γ-phase achieved a peak concentration of 23% after 120 min at 975 °C. We suggest 1050 °C to be the threshold temperature for the process where even a short residence time causes appreciable transformation, however, 1000 °C may be the ideal temperature for processing the concentrate due to the degree of material disintegration and α-phase transformation observed. The application of a first-order kinetic model yields kinetic parameters which fit the experimental data well. The resultant apparent activation energies of 655 and 731 kJ mol−1 obtained for α- and γ-decay, respectively, confirm the strong temperature dependence for the spodumene polymorph transformations.
This review details both the conventional and emerging methods of extracting tin from cassiterite. The emerging methods reviewed include sulphuric acid leaching of SnO, cooling crystallization of SnO, sulphide leaching, alkaline leaching, and dry chlorination. From these methods, the conventional approach (direct reduction smelting) stands out as the sole method that is suitable for industrial application, with none of the emerging ones being promising enough to be a contender. The thermodynamics involved in the hydrometallurgical extraction of tin from the mineral are also discussed. values calculated at 25 °C for the reduction–dissolution of SnO2 using reducing gases revealed feasibility only when carbon monoxide was used. An indication of the possible species produced during the hydrolysis of the oxide of the metal (SnO2 and SnO) as a function of pH (ranging from −2 to 14 and 0 to 14 for SnO2 and SnO, respectively) was noted and highlighted to link a Pourbaix diagram generated from literature data. This diagram suggests that the solubility of SnO2 in both strongly acidic and alkaline media is possible, but with a small dissolution window in each. The purification and recovery routes of the various processing techniques were then envisaged.
The chlorination of oxides of major concern in cassiterite concentrate with various chlorinating agents is investigated in light of their thermodynamic feasibilities to extract and recover their valuable metal components. Mechanisms responsible for the processes and their Gibbs free energy changes as a function of temperature to selectively separate and/or recover the metal(s) of interest and unwanted ones as their metallic chlorides are identified. Attention is given to gaseous (Cl2 and Cl2 + CO mixture) and solid (CaCl2 and MgCl2) chlorine sources, from which Cl2 + CO shows no reaction selectivity for any of the oxides but a feasible metal chloride formation for all. Chlorine gas (Cl2), on the other hand, could selectively form chlorides with metals of +2 oxidation state in their oxides, leaving those of high oxidation state unreacted. MgCl2, unlike CaCl2, is found capable of producing calcium, ferrous, and stannic chloride from their metallic oxides with enhanced reaction tendencies in the presence of silicon dioxide (SiO2). An overall study of the thermodynamic feasibility of all chlorine sources looked at alongside operational and environmental viabilities suitably suggests MgCl2 for a selective extraction of the valuable metal components in a cassiterite concentrate, in which case, moderate temperatures seem promising.