Current blood glucose monitoring (BGM) techniques are invasive as they require a finger prick blood sample, a repetitively painful process that creates the risk of infection. BGM is essential to avoid complications arising due to abnormal blood glucose levels in diabetic patients. Laser light-based sensors have demonstrated a superior potential for BGM. Existing near-infrared (NIR)-based BGM techniques have shortcomings, such as the absorption of light in human tissue, higher signal-to-noise ratio, and lower accuracy, and these disadvantages have prevented NIR techniques from being employed for commercial BGM applications. A simple, compact, and cost-effective non-invasive device using visible red laser light of wavelength 650 nm for BGM (RL-BGM) is implemented in this paper. The RL-BGM monitoring device has three major technical advantages over NIR. Unlike NIR, red laser light has ~30 times better transmittance through human tissue. Furthermore, when compared with NIR, the refractive index of laser light is more sensitive to the variations in glucose level concentration resulting in faster response times ~7-10 s. Red laser light also demonstrates both higher linearity and accuracy for BGM. The designed RL-BGM device has been tested for both in vitro and in vivo cases and several experimental results have been generated to ensure the accuracy and precision of the proposed BGM sensor.

In this study, we synthesized binder-free NiCo₂O₄@NiCo₂O₄ nanostructured materials on nickel foam (NF) by combined hydrothermal and cyclic voltammetry deposition techniques followed by calcination at 350 °C to attain high-performance supercapacitors. The hierarchical porous NiCo₂O₄@NiCo₂O₄ structure, facilitating faster mass transport, exhibited good cycling stability of 83.6% after 5000 cycles and outstanding specific capacitance of 1398.73 F g⁻¹ at the current density of 2 A·g⁻¹, signifying its potential for energy storage applications. A solid-state supercapacitor was fabricated with the NiCo₂O₄@NiCo₂O₄ on NF as the positive electrode and the active carbon (AC) was deposited on NF as the negative electrode, delivering a high energy density of 46.46 Wh kg⁻¹ at the power density of 269.77 W kg⁻¹. This outstanding performance was attributed to its layered morphological characteristics. This study explored the potential application of cyclic voltammetry depositions in preparing binder-free NiCo₂O₄@NiCo₂O₄ materials with more uniform architecture for energy storage, in contrast to the traditional galvanostatic deposition methods.

Layered double hydroxides (LDH) as active electrode materials have become the focus of research in energy storage applications. The manufacturing of excellent electrochemical performance of the LDH electrode is still a challenge. In this paper, the production of CoAl-LDH@Ni(OH)₂ is carried out in two steps, including hydrothermal and electrodeposition techniques. The prominent features of this electrode material are shown in the structural and morphological aspects, and the electrochemical properties are investigated by improving the conductivity and cycle stability. The core of this experimental study is to investigate the properties of the materials by depositing different amounts of nickel hydroxide and changing the loading of the active materials. The experimental results show that the specific capacity is 1810.5F·g⁻¹ at 2 A/g current density and the cycle stability remained at 76% at 30 A g⁻¹ for 3000 cycles. Moreover, a solid-state asymmetric supercapacitor with CoAl-LDH@Ni(OH)₂ as the positive electrode and multi-walled carbon nanotube coated on the nickel foam as the negative electrode delivers high energy density (16.72 Wh kg⁻¹ at the power density of 350.01 W kg⁻¹). This study indicates the advantages of the design and synthesis of layered double hydroxides, a composite with excellent electrochemical properties that has potential applications in energy storage.

Diabetes is a serious health issue that can be a great risk factor related to numerous physical problems. A class of drugs “Gliflozin” especially Sodium Glucose Co. Transporter 2 was inhibited by a novel drug, which is known as “empagliflozin”. While ZnO nanoparticles (NPs) had considerable promise for combating diabetes, it was employed in the treatment and management of type-2 diabetes mellitus. The new drug empagliflozin was initially incorporated into Zinc Oxide NPs in this study using the surface physio-sorption technique, and the degree of drug adsorption was assessed using the HPLC method. The tailored product was characterized by using the FTIR, EDX, Ultraviolet–Visible, XRD and SEM techniques. With an average particle size of 17 nm, SEM revealed mono-dispersion of NPs and sphere-like form. The Freundlich isotherm model best fits and explains the data for the physio-sorption investigation, which examined adsorption capabilities using adsorption isotherms. The enzymes α-amylase and α-glucosidase, which are involved in the human metabolism of carbohydrates, were used in the in-vitro anti-diabetic assays. It was discovered that the composite showed the highest levels of 81.72 and 92.77% inhibition of -α-amylase and -glucosidase at an absolute concentration of 1000 μg per ml with IC₅₀ values of 30.6 μg per ml and 72 μg per ml.

In this study, to fabricate a non-binder electrode, we grew nickel–cobalt sulfide (NCS) nanotubes (NTs) on a Ni foam substrate using a hydrothermal method through a two-step approach, namely in situ growth and an anion-exchange reaction. This was followed by the electrodeposition of double-layered nickel-cobalt hydroxide (NCOH) over a nanotube-coated substrate to fabricate NCOH core-shell nanotubes. The final product is called NCS@NCOH herein. Structural and morphological analyses of the synthesized electrode materials were conducted via SEM and XRD. Different electrodeposition times were selected, including 10, 20, 40, and 80 s. The results indicate that the NCSNTs electrodeposited with NCOH nanosheets for 40 s have the highest specific capacitance (SC), cycling stability (2105 Fg⁻¹ at a current density of 2 Ag⁻¹), and capacitance retention (65.1% after 3,000 cycles), in comparison with those electrodeposited for 10, 20, and 80 s. Furthermore, for practical applications, a device with negative and positive electrodes made of active carbon and NCS@NCOH was fabricated, achieving a high-energy density of 23.73 Whkg⁻¹ at a power density of 400 Wkg⁻¹.