In recent years, there has been a growing interest in developing portable and personal devices for measuring air quality and surrounding pollutants, partly due to the need for ventilation in the aftermath of COVID-19 situation. Moreover, the monitoring of hazardous chemical agents is a focus for ensuring compliance with safety standards and is an indispensable component in safeguarding human welfare. Air quality measurement is conducted by public institutions with high precision but costly equipment, which requires constant calibration and maintenance by highly qualified personnel for its proper operation. Such devices, used as reference stations, have a low spatial resolution since, due to their high cost, they are usually located in a few fixed places in the city or region to be studied. However, they also have a low temporal resolution, providing few samples per hour. To overcome these drawbacks and to provide people with personalized and up-to-date air quality information, a personal device (smartwatch) based on MEMS gas sensors has been developed. The methodology followed to validate the performance of the prototype was as follows: firstly, the detection capability was tested by measuring carbon dioxide and methane at different concentrations, resulting in low detection limits; secondly, several experiments were performed to test the discrimination capability against gases such as toluene, xylene, and ethylbenzene. principal component analysis of the data showed good separation and discrimination between the gases measured.
This study presents the development and characterization of a novel electronic nose system based on customized surface acoustic wave (SAW) sensors. The system includes four sensors, customized with different custom polymer coatings, in order to detect volatile organic compounds (VOCs). The main innovation lies in the design of a robust and versatile switching electronics system that allows for the integration of the SAW sensors into portable systems, as well as interoperability with other gas sensor technologies. The system includes a modular architecture that allows multiple sensor arrays to be combined to improve the selectivity and discrimination of complex gas mixtures. To verify the proper performance of the system and the detection capability of the manufactured sensors, experimental laboratory tests have been carried out. Specifically, ethanol and acetone measurements up to a 2000 ppm concentration have been performed. These preliminary experimental results demonstrate the capability of the SAW sensors with different response patterns across the sensor array. In particular, the sensor made with the polyvinyl acetate polymer exhibits high sensitivity to both VOCs.
Preventive conservation requires environmental information capable of identifying conditions that may contribute to the deterioration of cultural heritage collections. This work presents a low-cost IoT node for continuous formaldehyde monitoring inside museum display cases. The system is based on an ESP32-S3 and integrates a Sensirion SFA30 electrochemical formaldehyde sensor together with environmental and generic VOC sensors (MOX). Measurements are transmitted through Wi-Fi to a private server for remote storage and visualisation. The node was preliminarily evaluated under controlled static-headspace exposure to formaldehyde, formic acid and acetic acid. The dedicated SFA30 channel showed a concentration-dependent response to formaldehyde, while the auxiliary sensing channels exhibited different responses to the three analytes.