Microbially induced calcium carbonate precipitation (MICP) has emerged as a promising technique for environmental remediation, particularly for heavy metal removal. This study explores the potential of MICP for Cr(III) removal, analyzing the effects of temperature, pH, calcium source addition, and initial Cr(III) concentration on removal efficiency. The results show that Cr(III) can be efficiently removed with a removal rate approaching 100% under optimal conditions (25 °C, pH 7.0, 1.0 g CaCl2). The presence of Cr(III) induces the transformation of CaCO3 crystals from calcite to spherulitic aragonite, forming Cr-bearing carbonate compounds and hydroxides. This study provides insights into the mechanisms and optimal conditions for MICP-mediated Cr(III) removal, highlighting its feasibility and effectiveness for large-scale environmental remediation and offering an economical and environmentally friendly solution to Cr contamination.
A novel microchannel heat sink (TFMCHS) with trapezoidal ribs and fan grooves was proposed, and the microchannel was manufactured using selective laser melting technology. Firstly, the temperature and pressure drop at different power levels were measured through experiments and then combined with numerical simulation to explore the complex flow characteristics within TFMCHSs and evaluate the comprehensive performance of microchannel heat sinks based on the thermal enhancement coefficient. The results show that, compared with rectangular microchannel heat sinks (RMCHSs), the average and maximum temperatures of TFMCHSs are significantly reduced, and the temperature distribution is more uniform. This is mainly caused by the periodic interruption and redevelopment of the velocity boundary layer and thermal boundary layer caused by ribs and grooves. And as the heating power increases, the TFMCHS has better heat dissipation performance. When and the inlet flow rate is 32.5 , the thermal enhancement factor reaches 1.26.
The exceptional catalytic activity of CuNi-TBC-C for the NO 3 RR is primarily due to Ni's capacity to boost nitrate adsorption on the catalyst by adjusting the Cu d-orbital center and to optimize the reaction pathway for the NO 3 RR.
To extend the working life of products made of titanium alloy, it is necessary to improve the polishing method to diminish the remaining defects on the workpiece surface. The Halbach array-assisted magnetic abrasive particle polishing method for titanium alloy was employed in this work. The distribution of magnetic field strength was simulated and verified at first to learn the characteristics of the Halbach array used in this work. Then, the polishing performance of the polishing tool was studied by conducting the polishing test, which aimed to display the relationship between shear force and surface roughness with polishing time, and the surface morphology during polishing was also analyzed. Following the establishment of the response surface model, a study on the optimal polishing parameters was conducted to obtain the suitable parameters for maximum shear force and minimum surface roughness. The results show that the maximum shear force 6.11 N and minimum surface roughness Sa 88 nm can be attained, respectively, under the conditions of (1) polishing tool speed of 724.254 r·min−1, working gap of 0.5 mm, and abrasive particle size of 200 μm; and (2) polishing tool speed of 897.87 r·min−1, working gap of 0.52 mm, and abrasive particle size of 160 μm.
This study examines the adaptability of carbonate mineralizing bacteria in Cr(iii)-contaminated environments with varying Cr(iii) concentrations and their response mechanism via EPS.