Mingxuan Cao

Dr. Mingxuan Cao


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2020 in The Journal of Physical Chemistry Letters
Verified
Journal Article
Closed access
ZWZhiwen Wang
Zhiwen Wang
MCMingxuan Cao
Mingxuan Cao
GSGenrong Shao
Genrong Shao
ZZZhikun Zhang
Zhikun Zhang
HYHuiwen Yu
Huiwen Yu
JYJianquan Yao
Jianquan Yao

17 February 2022 in ACS Omega
Verified
Journal Article
Open access
YCYeqing Chen
Yeqing Chen
GXGaoyang Xiong
Gaoyang Xiong
LZLina Zhu
Lina Zhu
JHJie Huang
Jie Huang
XCXueying Chen
Xueying Chen
MCMingxuan Cao
Mingxuan Cao
The development of red emission carbon dots with bright solid-state fluorescence would significantly broaden their application in optoelectronic devices and sensors. Herein, a red-emissive carbon dot-based nanocomposite has been synthesized through chemical bonding with cellulose films. The red emission originating from the surface states of carbon dots was maintained in the cellulose films. Due to the stable chemical bonding, the photoluminescence intensity and emission wavelength remained unchanged for 12 months, and the quantum yield of the composite was enhanced over 4 times. It also showed outstanding stability in water or weak acid–base environments under pHs ranging from 2 to 11. Therefore, the mechanism of chemical bonding that eliminated the defects and preserved the efficient radiative process through surface states was proposed.

26 December 2016 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
YCYongli Che
Yongli Che
YZYating Zhang
Yating Zhang
CXCao Xiaolong
Cao Xiaolong
XSXiaoxian Song
Xiaoxian Song
HZHaiting Zhang
Haiting Zhang
Jianquan YaoJianquan Yao
Jianquan Yao
Solution processed photoactive PbS quantum dots (QDs) were used as channel in high-performance near-infrared vertical field-effect phototransistor (VFEpT) where monolayer graphene embedded as transparent electrode. In this vertical architecture, the PbS QD channel was sandwiched and naturally protected between the drain and source electrodes, which made the device ultrashort channel length (110 nm) simply the thickness of the channel layer. The VFEpT exhibited ambipolar operation with high mobilities of μe = 3.5 cm2/V s in n-channel operation and μh = 3.3 cm2/V s in p-channel operation at low operation voltages. By using the photoactive PbS QDs as channel material, the VFEpT exhibited good photoresponse properties with a responsivity of 4.2 × 102 A/W, an external quantum efficiency of 6.4 × 104% and a photodetectivity of 2.1 × 109 Jones at the light irradiance of 36 mW/cm2. Additionally, the VFEpT showed excellent on/off switching with good stability and reproducibility and fast response speed with a short rise time of 12 ms in n-channel operation and 10.6 ms in p-channel operation. These high mobilities, good photoresponse properties and simplistic fabrication of our VFEpTs provided a facile route to the high-performance inorganic photodetectors.

27 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
RHRong Hu
Rong Hu
KSKangjing Su
Kangjing Su
ZLZibin Lao
Zibin Lao
YCYixun Cai
Yixun Cai
斌付斌 付
斌 付
YWYing Wang
Ying Wang
Pure copper (Cu) material, because of its high thermal conductivity, can be 3D printed to fabricate effective thermal management components. However, in the selective laser melting (SLM) process, due to copper’s high optical reflectivity, Cu-based parts need to be printed using high laser power. In this study, we demonstrated 3D printing with a re-melting strategy is able to fabricate high-density and low-surface-roughness pure copper parts using only a moderate laser (350 W) power. The effect of the re-scan to initial scan speed ratio on the printing quality resulting from the re-melting strategy is discussed. The re-melting strategy is likened to a localized annealing process that promotes the recrystallization of the newly formed copper microstructures on the re-scan path. Given a hatch spacing of 0.06 mm and a powder layer thickness of 0.05 mm, Cu samples with 93.8% density and low surface roughness (Sa~22.9 μm) were produced using an optimized scan speed of 200 mm/s and a re-scanning speed of 400 mm/s, with a laser power of 350 W. Our work provides an approach to optimize the laser power for printing pure copper 3D parts with high relative density (low porosity) and low surface roughness while ensuring the lifetime stability of the part. The re-melting strategies have broad implications in 3D printing and are particularly relevant for metals with high reflectivity, such as pure copper.

8 December 2018 in Sensors
Verified
Journal Article
Open access
PDF file
YYYu Yu
Yu Yu
YZYating Zhang
Yating Zhang
LJLufan Jin
Lufan Jin
ZCZhiliang Chen
Zhiliang Chen
YLYifan Li
Yifan Li
Jianquan YaoJianquan Yao
Jianquan Yao
Humidity sensors allow electronic devices to convert the water content in the environment into electronical signals by utilizing material properties and transduction techniques. Three-dimensional graphene foam (3DGF) can be exploited in humidity sensors due to its convenient features including low-mass density, large specific surface area, and excellent electrical. In this paper, 3DGF with super permeability to water enables humidity sensors to exhibit a broad relative humidities (RH) range, from 0% to 85.9%, with a fast response speed (response time: ~89 ms, recovery time: ~189 ms). To interpret the physical mechanism behind this, we constructed a 3DGF model decorated with water to calculate the energy structure and we carried out the CASTEP as implemented in Materials Studio 8.0. This can be ascribed to the donor effect, namely, the electronic donation of chemically adsorbed water molecules to the 3DGF surface. Furthermore, this device can be used for user interaction (UI) with unprecedented performance. These high performances support 3DGF as a promising material for humidity sensitive material.

21 October 2021 in ACS Omega
Verified
Journal Article
Open access
IBIvan S. Babichuk
Ivan S. Babichuk
YRYurii A. Romaniuk
Yurii A. Romaniuk
Sergii GolovynskyiSergii Golovynskyi
Sergii Golovynskyi
VHVitali G. Hurtavy
Vitali G. Hurtavy
AMAlexander V. Mudryi
Alexander V. Mudryi
JYJian Yang
Jian Yang
Semiconductor Cu2ZnSn(SxSe1–x)4 (CZTSSe) solid solution is considered as a perspective absorber material for solar cells. However, during its synthesis or deposition, any modification in the resulting optical properties is hardly predicted. In this study, experimental and theoretical analyses of CZTSSe bulk crystals and thin films are presented based on Raman scattering and absorption spectroscopies together with compositional and morphological characterizations. CZTSSe bulk and thin films are studied upon a change in the x = S/(S + Se) aspect ratio. The morphological study is focused on surface visualization of the solid solutions, depending on x variation. It has been discovered for the first time that the surface of the bulk CZTSSe crystal with x = 0.35 has pyramid-like structures. The information obtained from the elemental analysis helps to consider the formation of a set of possible intrinsic lattice defects, including vacancies, self-interstitials, antisites, and defect complexes. Due to these results and the experimentally obtained values of the band gap within 1.0–1.37 eV, a deviation from the calculated band gap values is estimated in the range of 1.0–1.5 eV. It is suggested which defects can have an influence on such a band gap change. Also, on comparing the experimental Raman spectra of CZTSSe with the theoretical modeling results, an excellent agreement is obtained for the main Raman bands. The proposed theoretical approach allows to estimate the values of concentration of atoms (S or Se) for CZTSSe solid solution directly from the experimental Raman spectra. Thus, the visualization of morphology and the proposed theoretical approach at various x values will help for a deeper understanding of the CZTSSe structure to develop next-generation solar cells.