Activities were introduced in Kashiwa city in the Tokyo metropolitan area to correspond to the elevated environmental radiation level after the disaster of the Fukushima Daiichi nuclear power plant. These were based on a strong cooperation between local governments and experts. Ambient dose rate and radioactivity of foodstuff produced inside of the city have been monitored. Representative ambient dose rates around living environments have almost already become their original levels of the pre-accident because of the decontamination activity, natural washout and effective half-lives of radioactivity. The internal annual dose due to radioactive cesium under the policy of ‘Local Production for Local Consumption’ is estimated as extremely low comparing the variation range due to natural radioactivity. Systematic survey around a retention basin has been started. All of these latest monitoring data would be one of the core information for the policy making as well as a cost–benefit discussion and risk communication.

Radon, an element of natural radiation, is considered one of the leading causes of lung cancer worldwide. In Bangladesh, radon has been clarified as a foremost source of radiation exposure. Potential natural-radiation-induced elevated cancer risks were estimated in Bangladesh previously for the population. In this survey, as a very preliminary study in the country, comparative indoor radon (²²²Rn, Rn) and thoron (²²⁰Rn, Tn) concentration/population exposure was determined for the multistoried dwellings of south-western areas of Dhaka city. RADUET was used to assess annual Rn and Tn concentrations in determining the primary inhalation dose for the population. The annual effective dose of Rn and Tn was evaluated in this study for dwellings at 0.3 mSvy⁻¹, constituting a Tn dose contribution of an average of 40% with a dwelling-based wide range of 10–96%. Thus, Tn should not be neglected for Bangladesh while estimating radiological inhalation dose from the indoor environment. Again, the equilibrium factors, F of Rn and Tn, were determined by short-term measurement at averages of 0.6 and 0.02, respectively. Furthermore, using questionnaire estimation by principal component analysis, PCA following the dwelling characteristics, human lifestyles, and estimated long-term indoor Rn and Tn concentrations, this paper discussed indoor atmospheric/Rn factors for the investigated multistoried dwellings in Dhaka city.

At the time of Tokyo Electric Power Company’s Fukushima Daiichi Nuclear Power Station (1F) accident on March 11, 2011, many members of Japan Health Physics Society including researchers or radiation workers were involved in 1F accident-related work and research. After that, many 1F accident-related articles were submitted and published in Japanese Journal of Health Physics. The articles covered a wide range of topics such as lessons learned and future challenges, environmental monitoring, dosimetry, risk communication, radiation medicine and radioactive waste. There were about 130 articles related to the 1F accident in the 11 years until December 2021. In March 2022, a working group was established to review articles related to the 1F accident published in this journal. This article provides an overview.

The accident of the Fukushima Dai-ichi nuclear power plant of Tokyo Electric Power Cooperation (TEPCO) after the great east Japan earthquake (11 March 2011) elevated the background level of environmental radiation in Eastern Japan. Around the Tokyo metropolitan area, especially around Kashiwa and Nagareyama cities, the ambient dose equivalent rate has been significantly increased after the accident. Responding to strong requests from citizens, the local governments started to monitor the ambient dose equivalent rate precisely and officially, about 3 months after the accident had occurred. The two cities in cooperation with each other also organised a local forum supported by three radiation specialists. In this article, the activities of the local governments are introduced, with main focus on radiation monitoring and measurements. Topics are standardisation of environmental radiation measurements for ambient dose rate, dose mapping activity, investigation of foodstuff and drinking water, lending survey meters to citizens, etc. Based on the data and facts mainly gained by radiation monitoring, risk management and relating activity have been organised. ‘Small consultation meetings in kindergartens’, ‘health consultation service for citizens’, ‘education meeting on radiation protection for teachers, medical staffs, local government staffs, and leaders of active volunteer parties’ and ‘decontamination activity’, etc. are present key activities of the risk management and restoration around the Tokyo metropolitan area.

Building materials, such as brick and concrete, are known indoor radon (²²²Rn) and thoron (²²⁰Rn) sources. Most radon and thoron exhalation studies are based on the laboratory testing of pieces and blocks of such materials. To discuss if laboratory findings can be applied to a real-world environment, we conducted intensive in situ exhalation tests on two solid concrete interior walls of an apartment in Japan for over a year. Exhalation rates of radon (J_Rn) and thoron (J_Tn) were measured using an accumulation chamber and dedicated monitors, alongside monitoring indoor air temperature (T) and absolute humidity (AH_in). There were weak correlations between J_Rn or J_Tn and T or AH_in at one tested wall, and moderate correlations of J_Rn and strong correlations of J_Tn with T or AH_in at the other wall, meaning more or less seasonal variations. The findings aligned with previous laboratory experiments on J_Rn but lacked corresponding data for J_Tn. Additionally, a moderate or strong correlation between J_Rn and J_Tn was observed for both tested walls. Comparison with theoretical calculations revealed a new issue regarding the impact of each process of emanation and migration within concrete pores on radon and thoron exhalation. Overall, this study provides insight into parameterizing radon and thoron source inputs in modeling the spatiotemporal dynamics of indoor radon and thoron.

This study delves into the long-term atmospheric transport and deposition of ²¹⁰Pb in the Northern Hemisphere by using the atmospheric transport model HIRAT. The calculation for the four-year (2012–2015) period showed an average deposition flux of 13.0 Bq m⁻² month⁻¹ with significant seasonal variations characterized by higher deposition rates during summer and lower during winter. High deposition was found in the Northern Bay of Bengal and Bangladesh regions, Southern China, the Western Philippine Sea, the Eastern Japan Sea, the Northwestern Pacific region, the Eastern and Western coasts of North America, the Caribbean Sea, the Eastern Pacific region off of Central America, the Central Atlantic region between Central America and Africa, and the Northwestern Atlantic Ocean. Deposition patterns varied across latitudinal zones, with tropical areas experiencing the highest deposition and polar/subpolar zones the lowest. This study emphasized the impact of monsoons on the significantly large ²¹⁰Pb deposition in the Japan Sea region. Furthermore, this study showed that the lower troposphere (0 to 3 km) dominates with about 53%, and the middle troposphere (3 to 6 km) and upper troposphere (above 6 km) also contribute significantly to the total ²¹⁰Pb inventory with 37% and 10%, respectively. These findings provide essential insights into the characteristics of atmospheric transport and deposition of ²¹⁰Pb, and their mechanisms.