Zinc stearate (Znst) was physically blended with the sodium 4-[(4 chlorobenzoyl) amino] benzoate (SCAB) to obtain the SCAB-Znst composite nucleating agent. Znst was used to improve the dispersion property of SCAB and exert a lubricating effect on the PP matrix. The scanning electron microscopy and the fracture surface morphology of the PP/SCAB composite illustrated that the addition of Znst greatly reduced the aggregation phenomenon of SCAB in the PP matrix. The result of the rotary rheometer indicated that Znst exhibits internal lubrication in PP. The DSC result illustrated that the crystallization properties of PP were improved. Compared with pure PP, the Tc of the PP/SCAB composite increased by 1.44 °C (PP/Znst), 13.48 °C (PP/SCAB), and 14.96 °C (PP/SCAB-Znst), respectively. The flexural strength of pure PP, PP/SCAB, and PP/SCAB-Znst were 35.8 MPa, 38.8 MPa, and 40.6 MPa, respectively. The tensile strength of the PP/SCAB and PP/SCAB-Znst reached the values of 39.8 MPa and 42.9 MPa, respectively, compared with pure PP (34.1 MPa). The results demonstrated that Znst can promote the dispersion of SCAB in the PP matrix while exerting a lubricating effect, which enabled the enhancement of the crystalline and mechanical properties of PP.
To solve the decrease in the crystallization, mechanical and thermal properties of recycled polyethylene terephthalate (rPET) during mechanical recycling, the aromatic amide fatty acid salt nucleating agents Na-4-ClBeAmBe, Na-4-ClBeAmGl and Na-4-ClAcAmBe were synthesized and the rPET/nucleating agent blend was prepared by melting blending. The molecular structure, the thermal stability, the microstructure and the crystal structure of the nucleating agent were characterized in detail. The differential scanning calorimetry (DSC) result indicated that the addition of the nucleating agent improved the crystallization temperature and accelerated the crystallization rate of the rPET. The nucleation efficiencies (NE) of the Na-4-ClBeAmBe, Na-4-ClBeAmGl and Na-4-ClAcAmBe were increased by 87.2%, 87.3% and 41.7% compared with rPET which indicated that Na-4-ClBeAmBe and Na-4-ClBeAmGl, with their long-strip microstructures, were more conducive to promoting the nucleation of rPET. The equilibrium melting points () of rPET/Na-4-ClBeAmBe, rPET/Na-4-ClBeAmGl and rPET/Na-4-ClAcAmBe were increased by 11.7 °C, 18.6 °C and 1.9 °C compared with rPET, which illustrated that the lower mismatch rate between rPET and Na-4-ClBeAmGl (0.8% in b-axis) caused Na-4-ClBeAmGl to be the most capable in inducing the epitaxial crystallization and orient growth along the b-axis direction of the rPET. The small angle X-ray diffraction (SAXS) result proved this conclusion. Meanwhile, the addition of Na-4-ClBeAmGl caused the clearest increase in the rPET of its flexural strength and heat-distortion temperature (HDT) at 20.4% and 46.7%.
The molecular chains of recycled polyethylene terephthalate (rPET) show breakage during daily use, causing poor crystallization and leading to mechanical properties that, when blended with the nucleating agent, become an effective method of solving this problem. The salt-nucleating agent sodium benzoate (SB), disodium terephthalate (DT), and trisodium 1,3,5benzene tricarboxylic (TBT) were synthesized, and an rPET/nucleating agent blend was prepared. The intrinsic viscosity (η) results showed that the η of the rPET/SB was decreased, which indicated the breakage of the rPET molecular chains. The FTIR results indicated that a chemical reaction occurred between the rPET and Na+ of the SB. Moreover, the Na+ content of the DT and TBT were higher than that of the SB, which increased the opportunity for low-molecular-weight rPET to reattach to the organic carboxylic acid portion of the nucleating agent, thereby increasing the η of the rPET/DT and rPET/TBT. The salt-nucleating agent sodium benzoate greatly improved the crystallization properties of the rPET, resulting in the half-crystallization time decreasing, the crystallization temperature increasing, and the effect of SB being better than that of DT and TBT. This was because the nucleating agent caused chemical nucleation with rPET, and the ionic groups acted as nucleation sites, while the rPET/DT and rPET/TBT, which had high molecular weights, hindered the improvement of the crystallization properties. The mechanical properties prove that the rPET/SB decreased due to the severe degradation of the rPET molecular chains. The mechanical properties of the rPET/DT and rPET/TBT were effectively improved because of the nucleating agent refining the grain size of the rPET and the high molecular weight. But the stacking of multitudinous rPET molecular chains can form a structure resembling physical cross-linking, causing a slight decrease in the mechanical properties of the rPET/TBT compared to the rPET/DT.
Among numerous nucleating agents, organic carboxylate nucleating agents have been demonstrated to markedly improve the crystallization of polypropylene (PP). However, poor dispersion in the PP matrix affects the modification effect. In this work, erucamide (ECM) and sodium 4-[(4-chlorobenzoyl) amino] benzoate (SCAB) form a hydrogen-bonded self-assembled structure to obtain the SCAB-ECM composite nucleating agent in order to improve the dispersion of SCAB in the PP matrix and to exert internal lubrication on the PP matrix. The molecular structure of the SCAB-ECM composite was investigated by using Fourier transform infrared spectroscopy (FT-IR), and the result showed that SCAB and ECM could form a hydrogen-bonded self-assembled structure after physical blending. The scanning electron microscopy (SEM) results visualized that ECM promoted the dispersion of SCAB due to the formation of hydrogen-bonded self-assembled structures by SCAB and ECM. The crystallization behavior was studied using differential scanning calorimetry (DSC). At the crystallization temperature of 135 °C, the K of PP, PP/ECM, PP/SCAB, and PP/SCAB-ECM were 0.0002, 0.0004, 1.1616, and 1.8539, respectively. The crystallization properties of PP/SCAB-ECM were the best, which was attributed to the fact that SCAB formed a hydrogen-bonded self-assembled structure with ECM, which promoted the dispersion of SCAB in the PP matrix. The results of the rheological behavior demonstrated that the ECM can act as a lubrication effect, which was also proved by flexural strength results.
The nucleating agents with different alkyl chain lengths sodium 4-[(benzyl)amino] benzoate (SAB-Be), sodium 4-[(heptanoyl)amino] benzoate (SAB-7C), and sodium 4-[(stearoyl)amino] benzoate (SAB-18C) were synthesized via chemical to improve the crystallization and mechanical properties of recycled polyethylene terephthalate (rPET) that had been damaged during mechanical recycling. The rPET/nucleating agent blends were prepared by melt blending. The molecular structure and thermal stability of the nucleating agents were characterized using the utilization of fourier transform infrared (FTIR) and thermogravimetric analysis (TGA). The differential scanning calorimetry (DSC) results showed that the crystallization properties of the rPET had been improved. In addition, the glass transition temperatures (Tg) of rPET, rPET/SAB-Be, rPET/SAB-7C, and rPET/SAB-18C were 80.3 ± 0.3 °C, 80.4 ± 0.9 °C, 77.0 ± 1.2 °C, and 69.7 ± 0.9 °C, respectively, demonstrating that the length of the alkyl chain in the nucleating agents was essentially proportional to the lubrication effect on rPET. Meanwhile, the rheological properties also supported the conclusion. The isothermal thermodynamic analysis indicated that the compatibility between nucleating agents and rPET was related to the length of the alkyl chain in the nucleating agents. The scanning electron microscopy (SEM) results of the fracture surfaces of the rPET/nucleating agent blends showed that the longer the alkyl chain in the nucleating agent, the greater the compatibility with rPET. Furthermore, the rPET/SAB-18C exhibited the best mechanical properties of the samples used in this research, with flexural strength and impact strength increased by 5.1% and 58.9%, respectively, compared to rPET. Overall, this work provided the new approach for rPET upcycling by combining molecular design strategies.