A novel hybrid, water-based, sol-gel method was developed for the synthesis of functionalized silica with advanced adsorptive capacities towards heavy metal ions. The study employs the hyperbranched poly(ethylene imine) (HBPEI) as a reactive template for the synthesis of silica. The reaction was followed by FTIR, whereas the material was evaluated in terms of its microstructure and adsorptive properties. The results revealed a very potent adsorbent that can remove heavy metal ions (namely, Pb, Cu, and Zn) from water in a fast and efficient way. Greater selectivity was observed for lead, whereas the maximum adsorption capacities calculated from the Langmuir model were 833.3, 502.5, and 193.4 mg/g for lead, copper, and zinc, respectively.
In the current study, the synthesis of hydroxyapatite-ceria (HAP-CeO2) scaffolds is attempted through a bioinspired chemical approach. The utilized colloidal CeO2 suspension presents antifungal activity against the Aspergillus flavus and Aspergillus fumigatus species at concentrations higher than 86.1 ppm. Three different series of the composite HAP-CeO2 suspensions are produced, which are differentiated based on the precursor suspension to which the CeO2 suspension is added and by whether this addition takes place before or after the formation of the hydroxyapatite phase. Each of the series consists of three suspensions, in which the pure ceria weight reaches 4, 5, and 10% (by mass) of the produced hydroxyapatite, respectively. The characterization showed that the 2S series’s specimens present the greater alteration towards their viscoelastic properties. Furthermore, the 2S series’s sample with 4% CeO2 presents the best mechanical response. This is due to the growth of needle-like HAP crystals during lyophilization, which—when oriented perpendicular to the direction of stress application—enhance the resistance of the sample to deformation. The 2S series’s scaffolds had an average pore size equal to 100 μm and minimum open porosity 89.5% while simultaneously presented the lowest dissolution rate in phosphate buffered saline.
In recent years, research has revolved around materials with superior functionality. Despite the encouraging results, their commercial use is limited due to high production costs. The major drawback of nanomaterials is their tendency to form aggregates that limit their activity. In order to overcome barriers, the synthesis of advanced, composite materials is proposed. These materials must exhibit high mechanical strength, adhesion between substrate and coating, and enhanced properties when compared to the substrate or the coating. In the present work, expanded perlite substrates were coated or impregnated with materials with a variety of physicochemical characteristics. The influence of the substrate’s physical properties on the performance of the produced composite materials was studied.