For advanced aircraft, the temperature environment inside the cabin is very severe due to the high flight speed and the compact concentration of the electronic equipment in the cabin. Accurately predicting the temperature environment induced inside the cabin during the flight of the aircraft can determine the temperature environment requirements of the onboard equipment inside the cabin and provide an accurate input for the thermal design optimization and test verification of the equipment. The temperature environment of the whole aircraft is divided into zones by the cluster analysis method; the heat transfer mechanism of the aircraft cabin is analyzed for the target area; and the influence of internal and external factors on the thermal environment is considered to establish the temperature environment prediction model of the target cabin. The coefficients of the equations in the model are parameterized to extract the long-term stable terms and trend change terms; with the help of the measured data of the flight state, the model coefficients are determined by a stepwise regression method; and the temperature value inside the aircraft cabin is the output by inputting parameters such as flight altitude, flight speed, and external temperature. The model validation results show that the established temperature environment prediction model can accurately predict the change curve of the cabin temperature during the flight of the aircraft, and the model has a good follow-up performance, which reduces the prediction error caused by the temperature hysteresis effect. For an aircraft, the estimated error is 2.8 °C at a confidence level of 95%. Engineering cases show that the application of this method can increase the thermal design requirements of the airborne equipment by 15 °C, increase the low-temperature test conditions by 17 °C, and avoid the problems caused by an insufficient design and over-testing. This method can accurately predict the internal temperature distribution of the cabin during the flight state of the aircraft, help designers determine the thermal design requirements of the airborne equipment, modify the thermal design and temperature test profile, and improve the environmental worth of the equipment.
Airplane cabin temperature is a critical environmental factor governing the safety and reliability of airborne equipment. Compared with measuring temperature, predicting temperature is more cost- and time-saving and can cover an extreme flight envelope. Physics-informed neural networks (PINNs) offer a promising prediction solution whose performance hinges on the availability of precise governing differential equations. However, building governing differential equations between flight parameters and cabin temperature is a great challenge, as it is comprehensively influenced by aerodynamic heat, avionic heat, and internal flow. To solve this, a new PINN framework based on “a priori monotonicity” is proposed. Underlying physical trends (monotonicity) from flight data are extracted to construct the loss function as a data-driven constraint, thus eliminating the need for any governing equations. The new PINN is developed to estimate the seven cabin temperatures of an unmanned aerial vehicle. The model was trained on data from four flight sorties and validated on another four independent sorties. Results demonstrate that the proposed PINN achieves a mean absolute error of 1.9 and a root mean square error of 2.6, outperforming a conventional neural network by approximately 35%. The core value of this work is a new PINN framework that bypasses the development of complex governing equations, which enhances its practicality for engineering applications.
A phase change materials (PCM)-based heat sink is an effective way to cool intermittent high-power electronic devices in aerospace applications such as airborne electronics and aircraft external carry. Optimizing the heat sink is significant in designing a compact and efficient system. This paper proposes an optimization procedure for the PCM/expanded graphite (EG)-based heat sink to minimize the temperature of the heat source. The numerical model is built to estimate the thermal response, and a surrogate model is fitted using the Kriging model. An optimization algorithm is constructed to predict the optimum parameters of the heat sink, and the effects of heat sink volume, heat flux, and working time on the optimal parameters of the heat sink are investigated. This shows that the numerical results agree well with the experimental data, and the proposed optimization method effectively obtains the optimal EG mass fraction and the geometric dimensions of the PCM enclosure. The optimal EG mass fraction increases with the rise in heat sink volume and decreases with the increase in heat flux and working time. The optimal ratio of the height to the length of the heat sink is 0.43. This study provides practical guidance for the optimal design of a PCM/EG-based heat sink.
Accurate simulation of repetitive aircraft shock is needed to assess the environmental adaptability of aircraft equipment, especially at locations close to the excitation source. Conventional narrowband random-on-random (NOR) testing generates a stationary, approximately Gaussian waveform. Although its power spectral density (PSD) can satisfy the prescribed spectrum, it does not reproduce the high peaks, repeated pulse shape, and high kurtosis observed in near-field aircraft shock. This paper presents a time-domain windowed pulse (TDWP) synthesis method with a time-frequency joint optimization procedure. A stationary random carrier is generated from the initial PSD, and a physically motivated exponential window is used to impose the firing-rate-related pulse pattern. Windowing changes the spectrum, so a regularized spectral equalization is applied in a closed loop to bring the PSD of the final waveform back to the target spectrum. The window decay exponent is selected by minimizing errors in peak and kurtosis while enforcing PSD consistency. One set of field measurements and three laboratory tests were used for validation. Relative to the conventional method, TDWP reduced the absolute error in maximum peak, kurtosis, and fatigue-damage-equivalent response by 46.4, 51.2, and 53.9 percentage points, respectively. The results indicate that preserving the transient pulse sequence can improve the representation of near-source repetitive aircraft shock while maintaining the prescribed spectral requirement under the investigated conditions.