HE LI

Mr. HE LI

China Aero-Polytechnology Establishment, Beijing, China
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 September 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
HE LIHE LI
HE LI
JZJianjun Zhang
Jianjun Zhang
LCLiangxu Cai
Liangxu Cai
MLMinwei Li
Minwei Li
YFYun Fu
Yun Fu
YHYujun Hao
Yujun Hao
For advanced aircraft, the temperature environment inside the cabin is very severe due to the high flight speed and the compact concentration of the electronic equipment in the cabin. Accurately predicting the temperature environment induced inside the cabin during the flight of the aircraft can determine the temperature environment requirements of the onboard equipment inside the cabin and provide an accurate input for the thermal design optimization and test verification of the equipment. The temperature environment of the whole aircraft is divided into zones by the cluster analysis method; the heat transfer mechanism of the aircraft cabin is analyzed for the target area; and the influence of internal and external factors on the thermal environment is considered to establish the temperature environment prediction model of the target cabin. The coefficients of the equations in the model are parameterized to extract the long-term stable terms and trend change terms; with the help of the measured data of the flight state, the model coefficients are determined by a stepwise regression method; and the temperature value inside the aircraft cabin is the output by inputting parameters such as flight altitude, flight speed, and external temperature. The model validation results show that the established temperature environment prediction model can accurately predict the change curve of the cabin temperature during the flight of the aircraft, and the model has a good follow-up performance, which reduces the prediction error caused by the temperature hysteresis effect. For an aircraft, the estimated error is 2.8 °C at a confidence level of 95%. Engineering cases show that the application of this method can increase the thermal design requirements of the airborne equipment by 15 °C, increase the low-temperature test conditions by 17 °C, and avoid the problems caused by an insufficient design and over-testing. This method can accurately predict the internal temperature distribution of the cabin during the flight state of the aircraft, help designers determine the thermal design requirements of the airborne equipment, modify the thermal design and temperature test profile, and improve the environmental worth of the equipment.

26 August 2023
Verified
Conference Paper
Closed access
HE LIHE LI
HE LI
JZJianjun Zhang
Jianjun Zhang
YHYujun Hao
Yujun Hao
JSJiakang Shen
Jiakang Shen
JXJun Xu
Jun Xu
NXNan Xue
Nan Xue
Accurate prediction of the cabin temperature environment induced by the flight of an unmanned aerial vehicle (UA V) is of great significance for the environmental adaptability requirements of the airborne equipment, the environmental adaptability design, and the test verification. In this study, we investigated the formation mechanism of the thermal environment of a UAV and analyzed the comprehensive effects of various environmental factors on its thermal environment. Based on the Kalman filter, a temperature environment prediction method for UAV platforms was proposed. In accordance with the measured data of the UAV, the characterization functions of flight parameters such as the external altitude, Mach number, and the environment inside the UAV cabin were established. Finally, the model was verified. The results illustrated that the temperature prediction model using the Kalman filter could accurately predict the temperature variation in the UAV cabin. Meanwhile, the model extrapolation stability is satisfactory. The maximum error is 3.19°C, which satisfies the engineering requirements.

12 October 2023
Verified
Conference Paper
Closed access
HE LIHE LI
HE LI
JZJianjun Zhang
Jianjun Zhang
YFYun Fu
Yun Fu
YHYujun Hao
Yujun Hao
JXJun Xu
Jun Xu
YZYong Zhong
Yong Zhong
In order to accurately predict the microclimate environment induced in the cabin during helicopter parking, further support the design, verification and health monitoring of onboard equipment in the cabin. Based on the measured data of the natural environment and platform induced environment of a helicopter in the parking state, and considering the coupling change relationship between temperature, humidity and solar radiation, this paper proposed a comprehensive environmental synchronous prediction method of temperature, humidity and solar radiation intensity inside the helicopter cockpit and equipment cabin based on multiple linear regression and Elman neural network, and established a prediction model. It also predicted the cabin environment when it was serving in a certain place, and draws the high-temperature environment map. The results showed that the model had good prediction accuracy and could accurately characterize the relationship between the internal and external environment of the helicopter platform.

1 October 2020
Verified
Conference Paper
Closed access
JXJun Xu
Jun Xu
YLYao Lu
Yao Lu
JZJianjun Zhang
Jianjun Zhang
JSJiakang Shen
Jiakang Shen
HE LIHE LI
HE LI
CLCong Liu
Cong Liu
This paper proposes a method for predicting the vibration environment of aircraft external stores based on deep belief network, which based on the relationship between the vibration environment, pressure altitude and Mach number of the aircraft external stores in flight. Firstly, GJB 150.16A empirical formulas were analyzed and then generating simulation data, which a total of 7470 sets. Secondly, linear regression and deep belief network models were set up respectively, and deep belief network number of hidden layer node was optimized, then the expected errors of two methods were compared and analyzed, including root mean square error (RMSE), mean absolute error (MAE) and mean relative error (MRE). Finally, DBN method was applied to a case for prediction the vibration of a certain aircraft store, intending to verify the feasibility and accuracy of DBN method. The results show that the DBN model can fully characterize the non-linear relationship between the pressure altitude, Mach number and RMS value of the aircraft external stores in the flight environment, and the overall expected effect is better than linear regression. The expected mean relative error is less than ± 3 dB. This method has provided a new way to predict the vibration environment of aircraft external stores, and is of great significance for PHM in the whole life of aviation weapon equipment.

15 November 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
JZJianjun Zhang
Jianjun Zhang
MLMinwei Li
Minwei Li
HE LIHE LI
HE LI
YFYun Fu
Yun Fu
LCLiangxu Cai
Liangxu Cai
A phase change materials (PCM)-based heat sink is an effective way to cool intermittent high-power electronic devices in aerospace applications such as airborne electronics and aircraft external carry. Optimizing the heat sink is significant in designing a compact and efficient system. This paper proposes an optimization procedure for the PCM/expanded graphite (EG)-based heat sink to minimize the temperature of the heat source. The numerical model is built to estimate the thermal response, and a surrogate model is fitted using the Kriging model. An optimization algorithm is constructed to predict the optimum parameters of the heat sink, and the effects of heat sink volume, heat flux, and working time on the optimal parameters of the heat sink are investigated. This shows that the numerical results agree well with the experimental data, and the proposed optimization method effectively obtains the optimal EG mass fraction and the geometric dimensions of the PCM enclosure. The optimal EG mass fraction increases with the rise in heat sink volume and decreases with the increase in heat flux and working time. The optimal ratio of the height to the length of the heat sink is 0.43. This study provides practical guidance for the optimal design of a PCM/EG-based heat sink.

12 October 2023
Verified
Conference Paper
Closed access
JXJun Xu
Jun Xu
JZJianjun Zhang
Jianjun Zhang
XCXueqing Chen
Xueqing Chen
JSJiakang Shen
Jiakang Shen
HE LIHE LI
HE LI
Aiming at the problem that it is difficult to determine the environmental test conditions with nonstationary random vibration data, two methods of maximum spectral analysis have been summed up. These two methods are FFT and digital filter, which are based on short-time Fourier transform and minimum mean-square error criterion. Then, the advantages, disadvantages, and relative error with different bandwidth are discussed, and then examples are given to testify the better method. The theoretic analysis and simulation results show that: the relative error is minimum with conventional FFT computations with proportional resolution bandwidth. After applying the conventional FFT computations to the determination of environmental conditions for a certain product with 9 groups of nonstationary vibration data, the result is reasonable and effective. Therefore, the conventional FFT is the best method to deal with nonstationary random vibration data, which provides guidance for formulating the environmental conditions based on maximum spectral.