The microstructure and deformation mechanism of an FeCoCrNiAl0.5 high entropy alloy during nanoscratching is studied using a combined atomistic and physical model study.
Compared to the traditional alloys, high entropy alloys exhibit exceptional strength and outstanding ductility, making them highly attractive for use in demanding engineering applications. However, the atomic-scale deformation behavior of HEAs with precipitate under the low-cycle loading conditions has not been well studied. Here, we utilize molecular dynamics simulations to investigate the low cycle fatigue behavior of AlCoCrFeNi HEAs with AlNi-rich phase, in order to better understand the cyclic deformation, work hardening, and damage mechanisms. In the stress-strain hysteresis loops, the stress in the elastic stage exhibits a gradual linear increase, followed by fluctuations at yielding and plastic deformation. The strain hardening depends on the cycle number after the yielding stage. With an increase in the number of cycles, the activation mode of stacking faults gradually transitions from a multi-slip system to a single-slip system, attributed to the gradual phase transformation. A thorough examination of dislocation evolution is crucial in understanding the strengthening and plastic behavior of materials under cyclic loading. The generation of more stair-rod dislocations further suppresses the movement of dislocations. The combined effects of element diffusion, structural transformation, and incoherent precipitation play a critical role in enhancing the mechanical properties of AlCoCrFeNi HEAs. The strength of high entropy alloys is improved through interface strengthening caused by element diffusion and structural transformation, along with dispersion induced by incoherent precipitation. This work provides a detailed atomic-level understanding of the cyclic deformation-induced strengthening mechanism, in order to design high-strength and ductile HEAs with specific desired properties.
To develop a cost-effective titanium alloy tailored for laser powder bed fusion (LPBF), a novel Ti-5.2Al-5Fe (wt.%) dual-phase alloy was designed and fabricated in this study. The composition was optimized for low density (4.4 g/cm3), high yield strength (1052 MPa), and suitable β-phase stability ([Mo]eq = 9.3%). The alloy demonstrated excellent formability, achieving high densification (porosity ≤ 2%) and hardness (>400 HV) over a wide volumetric energy density range (48–204 J/mm3). The Al element inhibited balling by improving melt pool wettability, while the Fe element synergistically promoted densification by lowering the liquidus temperature. The as-built microstructure comprised α and β phases, with the α-phase content increasing significantly from 25.4% to 60.8% with higher energy density. While all samples exhibited high tensile strength (>1290 MPa), ductility was limited (<2.6%). EBSD analysis identified the α-phase as the primary carrier of micro-residual stress, with a high density of “zero-solution” points, low-angle grain boundaries, and KAM values. This indicates severe stress concentration from rapid solidification and phase transformation, elucidating the fundamental reason for the low ductility. This study provides systematic insights from composition design to microscopic mechanisms for designing LPBF-dedicated titanium alloys with a wide process window.
The performance of the selective electron beam melting (SEBM) products depends on the SEBM-induced temperature and stress. Here, the thermomechanical finite element simulations are conducted to investigate the dynamic evolution of temperature and the thermal stress of melt pool during the SEBM process of Ti6Al4V alloys under various processing parameters and scanning strategies. The results show that the melt pool undergoes three stages of preheating, melting, and remelting under the influence of adjacent scanning tracks. This complex thermal history drives significant changes in thermal stress within the melt pool. After adjusting the processing parameters, it is found that a low scanning speed and high electron beam energy result in a high temperature gradient and stress in the molten pool. Compared to the electron beam energy, the scanning speed has a more significant impact on temperature and residual stress. For the dual-electron-beam scanning strategy, the coupling thermal effect between electron beams can reduce the temperature gradient of the melt pool, thereby suppressing the formation of columnar crystals. The electron beam energy of 300 W and the scanning speed of 1.5 m/s can be selected under various scanning strategies, which are expected to suppress the formation of coarse and columnar β grains and achieve relatively low residual stress. These results contribute to providing a theoretical basis for selecting optimized process parameters and scanning strategies.
Multi-principal-element alloys (MPEAs) exhibit superior strength and good ductility. However, tribological properties of FeCrNi MPEAs remain unknown at nanoscale and complex environments. Here, we investigate the effects of scratching speed, depth, and temperature on microstructural and tribological characteristics of FeCrNi using molecular dynamics simulations combined with an elevated temperature tribological experiment. The scratching force experiences the increase stage, the undulated stage, and the stable stage due to chip formation. Compared to traditional alloy coatings, low force enhances the useful life. With increased speed, the friction coefficient decreases, agreeing with previous work. High speed impacting includes severe local plastic deformation, from dislocation to amorphization. As the scratching depth increases, the average scratch force and friction coefficient increases owing to material accumulation in front of the abrasive particles. The surface morphology and dislocation behavior are significantly different during the scratching process. In addition, we revealed a temperature-dependent friction mechanism. FeCrNi MPEAs have excellent wear resistance at an intermediate temperature, which is attributed to the high Cr content promoting the formation of the compact oxide layer. This work provides atomic-scale mechanistic insights into the tribological behavior of FeCrNi, and would be applied to the design of MPEAs with high performance.
Amorphous/crystalline high-entropy-alloy (HEA) composites show great promise as structural materials due to their exceptional mechanical properties. However, there is still a lack of understanding of the dynamic nanoindentation response of HEA composites at the atomic scale. Here, the mechanical behavior of amorphous/crystalline HEA composites under nanoindentation is investigated through a large-scale molecular dynamics simulation and a dislocation-based strength model, in terms of the indentation force, microstructural evolution, stress distribution, shear strain distribution, and surface topography. The results show that the uneven distribution of elements within the crystal leads to a strong heterogeneity of the surface tension during elastic deformation. The severe mismatch of the amorphous/crystalline interface combined with the rapid accumulation of elastic deformation energy causes a significant number of dislocation-based plastic deformation behaviors. The presence of surrounding dislocations inhibits the free slip of dislocations below the indenter, while the amorphous layer prevents the movement or disappearance of dislocations towards the substrate. A thin amorphous layer leads to great indentation force, and causes inconsistent stacking and movement patterns of surface atoms, resulting in local bulges and depressions at the macroscopic level. The increasing thickness of the amorphous layer hinders the extension of shear bands towards the lower part of the substrate. These findings shed light on the mechanical properties of amorphous/crystalline HEA composites and offer insights for the design of high-performance materials.