This study aims to develop a procedure for the production of 3D-printed forearm prostheses (especially hard outer sockets). The production procedure is designed in the form of a parametric workflow (CAD model), which significantly speeds up the designing process of the prosthesis. This procedure is not fixedly dependent on the software (SW) equipment and is fully transferable into another SW environment. The use of these prostheses will significantly increase the comfort of their patients’ lives. It is possible to produce prostheses faster and in larger amounts and variants by the usage of additive technology. The input for the own production of the prosthesis is a model of the internal soft socket of the patient. This soft socket (soft bed) is made by a qualified prosthetist. A 3D-scanned CAD model is obtained afterward using the scanning method by an automatic laser projector. An editable, parametric external socket (modifiable in any CAD format) is generated from the obtained 3D scan using a special algorithmic model. This socket, after the necessary individual modifications, is transferred to 3D printing technology and produced using powder technology Multi Jet Fusion (HP MJF). The result of the designed and tested procedure is a quickly editable 3D-printed outer socket (main part of prosthesis), which is able to fully replace the current long-fiber composite solution. Production of current solutions is relatively time-consuming, and only one piece is produced in a given time. The newly designed technology eliminates this. This study summarized the possibilities of speeding up the production of forearm prostheses (but not only these) by creating a parametric CAD model that is applicable to different patients.
Safety of rail vehicles is an important feature of sustainable public transport. Proofs of an effort in that area are new recommendations and regulations from the expert commission (WG2 of the Technical Committee CEN / TC 256) regarding trams and light rail vehicles aimed at vulnerable road users. Additional requirements on tram safety can be requested by the vehicle operator and/or city. Pedestrian safety measures can be adopted from the automotive sector utilising the protection principles from Regulation EC No. 78/2009, ECE/UN regulations, and EuroNCAP tests. The purpose of this publication is to introduce a simplified testing method for the tram front end with respect to pedestrian head-on collisions. Testing methods based on segment impactors were generally accepted. The wrap-around distance defines the assessment of vehicle impact areas. A mathematical model was created to compare the results of the full-scale tests and the segment tests done by the standard and simplified aluminium head impactors. The tram front-end design can be tested using this alternate method, based on a simple impactor and easy methodology, providing an efficient tool to inspire both the tram manufacturers and vehicle operators to improve the vulnerable road users’ safety in city traffic.
Quality design is necessary prerequisite for correct and safe operation of all mechanical devices. This design has to consider all simulations and calculations. All boundary conditions have to be involved in this design. Ignorance of some of t...
19 September 2026 in Transportation Research Part D: Transport and Environment