A technology roadmap for the electrical performance of high-speed silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs) is presented based on combining the results of various 1-D, 2-D, and 3-D technology computer-aided design (TCAD) simulation tools with geometry scalable compact modeling. The latter, including all known parasitic effects, enables the accurate determination of the figures of merit for both devices and selected benchmark circuits. The presented roadmap defines five major technology nodes with the maximum oscillation frequency of a typical high-frequency device structure as the main device design target under the constraints of various other parameters for generating the doping profiles and for defining the lateral scaling factors. An extensive and consistent set of technology and electrical parameters is provided along with the obtained scaling rules. The expected fabrication-related challenges and possible solutions for achieving the predicted performance are being discussed. It is hoped that the presented roadmap will be useful not only for foundries and equipment manufacturers but also for circuit and system designers enabling better predictions of the capability of SiGe-BiCMOS process technology for new millimeter-wave (mm-wave) and terahertz (THz) applications.
28 August 2009 in IEEE Journal of Solid-State Circuits
This paper presents a complete 0.13 μm SiGe BiCMOS technology fully dedicated to millimeter-wave applications, including a high-speed (230/280 GHz fT/fMAX) and medium voltage SiGe HBT, thick-copper back-end designed for high performance transmission lines and inductors, 2 fF/μm2 high-linearity MIM capacitor and complementary double gate oxide MOS transistors. Details are given on HBT integration, reliability and models as well as on back-end devices models.
18 June 2013 in IEEE Journal of Solid-State Circuits
The paper presents design optimization strategies and a comparison of the performance of SiGe HBT fundamental and push-push Colpitts and Colpitts-Clapp voltage-controlled oscillators (VCOs), with and without doublers and buffers, as possible solutions for efficient milliwatt-level, low-noise signal sources at submillimeter-wave frequencies. The fundamental frequency Colpitts VCO covers a 12% tuning range between 218 and 246 GHz (the highest for SiGe HBTs) with up to -3.6-dBm output power and 0.8% efficiency. The 300-GHz signal source, consisting of a Colpitts-Clapp VCO followed by a buffer amplifier and a doubler, shows -1.7-dBm output power around 290 GHz, -101-dBc/Hz phase noise at 10-MHz offset, 7.5% tuning range, and 0.4% efficiency. Finally, the push-push Colpitts-Clapp VCO exhibits the highest operation frequency, from 309 to 325 GHz, but with reduced efficiency of only 0.07% and 5% tuning range. It was concluded that the differential cascode buffer placed between the VCO and doubler was instrumental in achieving the best phase noise and output power with good efficiency and without compromising tuning range.
This paper presents Si/SiGe:C and InP/GaAsSb HBTs which feature specific assets to address submillimeter-wave and THz applications. Process and modeling status and challenges are reviewed. The specific topics of thermal and substrate effects, reliability, and HF measurements are also discussed.
This paper presents the first 55 nm SiGe BiCMOS technology developed on a 300 mm wafer line in STMicroelectronics. The technology features Low Power (LP) and General Purpose (GP) CMOS devices and 0.45 μm 2 6T-SRAM bit cell. High Speed (HS) HBT exhibits 320 GHz f T and 370 GHz f MAX associated with a CML ring oscillator gate delay τ D of 2.34 ps. Transmission lines, capacitors, high-Q varactors and inductors dedicated to millimeter-wave applications are also available.
This paper summarizes the technological developments carried out on SiGe HBTs in the frame of the European project DOTFIVE. The architectures of the different partners and their performances are presented and discussed showing that the project objectives have been met.