Effective path planning is essential for autonomous drone flight to enhance task efficiency. Many researchers have applied swarm intelligence algorithms to drone path planning. For instance, the traditional Butterfly Optimization Algorithm (BOA) has been used for this purpose. However, traditional BOA faces challenges such as slow convergence and susceptibility to being trapped in local optima. An Improved Butterfly Optimization Algorithm (IBOA) has been developed to identify optimal routes to address these limitations. Initially, ICMIC mapping is utilized to establish the butterfly community, enhancing the initial population’s diversity and preventing premature algorithm convergence. Following this, a population reset strategy is introduced, replacing weaker individuals over a specified number of iterations while maintaining a constant population size. This strategy enhances the algorithm’s ability to avoid local optima and increases its robustness. Additionally, characteristics of the Particle Swarm Optimization (PSO) algorithm are integrated to enhance the butterfly’s location update mechanism, accelerating the algorithm’s convergence rate. To evaluate the performance of the IBOA algorithm, this study designed a CEC2020 function test experiment and compared it with several swarm intelligence algorithms. The results showed that IBOA achieved the best performance in 70% of the function tests, outperforming 75% of the other algorithms. In the path planning experiments within a simulated environment, IBOA quickly converged to the optimal path, and the paths it planned were the shortest and safest compared to those generated by other algorithms.
The spray characteristics of the pressure swirl nozzle are experimentally studied using particle dynamics analysis (PDA) and high-speed photography system in this paper, specifically focusing on the dependence of geometrical dimensions of orifice on the spray SMD, velocity magnitude and droplet distribution, and the spray cone angle. It is indicated that the increase of orifice diameter makes the initial swirling velocity lower and the spray liquid film thicker. When the spray cone is fully expanded, the flow rate of 900 μm orifice diameter nozzle increases by 30–40% and the SMD of 900 μm orifice diameter nozzle increases by 8.5% compared with that of 700 μm orifice diameter nozzle. According to the experimental conditions, the relationship between Re and spray angle was calculated as θ = 29.97*Re0.087, ignoring the factors that had little influence on spray angle. The decrease of the orifice length makes the distance of gas-medium shearing action shorten so that thinner oil film near wall cannot be formed by the extrusion of air core, leading to the swirling intensity reducing and the suction effect weakened. The spray cone angle of the 450 μm orifice length atomizer is about 5° smaller than the nozzle of 500 μm orifice length, and more small SMD droplets are not sucked, resulting in the distribution range of spray SMD declining.
We demonstrated the development, implementation, and functional verification of the combustion science payload deployed on the China Space Station. The Combustion Science Experiment System (CSES) integrated seven subsystems and modular plugins to address the major challenges facing microgravity combustion research, including the lack of long-duration experimental platforms, spatial constraints, and safety risks. Through on-orbit testing, the core functions of the CSES under microgravity conditions were validated, including gas supply, ignition, combustion diagnostic, exhaust purification, and emission. The system achieved autonomous experiment execution by ground-injected commands. Data from on-orbit methane combustion experiments demonstrated that the CSES was capable of stably supplying oxygen and fuel gas at a preset flow rate, real-time combustion diagnosis, and provided high-resolution flame image. Effectively exhaust gas purification and emission control of the CSES have also been tested and verified. It provides a safe, reliable, and stable microgravity environment of long-duration research for the combustion science and the development of spacecraft fire safety technology.
1 January 2021 in Chinese Journal of Space Science