We demonstrated the development, implementation, and functional verification of the combustion science payload deployed on the China Space Station. The Combustion Science Experiment System (CSES) integrated seven subsystems and modular plugins to address the major challenges facing microgravity combustion research, including the lack of long-duration experimental platforms, spatial constraints, and safety risks. Through on-orbit testing, the core functions of the CSES under microgravity conditions were validated, including gas supply, ignition, combustion diagnostic, exhaust purification, and emission. The system achieved autonomous experiment execution by ground-injected commands. Data from on-orbit methane combustion experiments demonstrated that the CSES was capable of stably supplying oxygen and fuel gas at a preset flow rate, real-time combustion diagnosis, and provided high-resolution flame image. Effectively exhaust gas purification and emission control of the CSES have also been tested and verified. It provides a safe, reliable, and stable microgravity environment of long-duration research for the combustion science and the development of spacecraft fire safety technology.
This study presents a surrogate-assisted multi-objective numerical framework to analyze and optimize the coupled effects of geometric parameters on the spray cone angle and discharge coefficient of a pressure swirl nozzle under microgravity conditions. Three-dimensional CFD simulations combined with an orthogonal experimental design were used to construct a structured dataset, on which parameter sensitivity and objective inconsistency were diagnosed using the Analytic Hierarchy Process. Back-propagation neural network surrogate models were then developed and coupled with the NSGA-II algorithm to explore the continuous design space and identify Pareto-optimal solutions. CFD re-evaluations show that, under identical operating conditions, the Pareto-based optimized configuration increases the spray cone angle from 64.71° to 69.14° while improving the discharge coefficient from 0.2736 to 0.3903 relative to the baseline nozzle. The results demonstrate that explicitly accounting for the trade-off between spray spreading and flow capacity enables a more balanced nozzle design than conventional weighted optimization approaches, providing a quantitative reference for microgravity-relevant injector design.
The Particle Image Velocimetry (PIV) Unit in the Combustion Science Experimental System (CSES) aboard the China Space Station (CSS) is designed for flow field measurements in microgravity combustion experiments. However, the lack of a reliable microgravity-compatible tracer particle seeder has hindered its practical application. To address this issue, the cyclone PIV particle seeder was proposed and evaluated through steady and transient numerical simulations using the Reynolds Stress Model (RSM) and Eulerian multiphase model to assess the effects of geometric parameters, gravity, and particle accumulation on flow characteristics and particle seeding performance. Ground-based cold jet and premixed combustion PIV experiments were also conducted. Results show that while the flow field of the cyclone particle seeder is generally similar to conventional cyclone separators, localized differences exist. Traditional optimization strategies of cyclone separators may not be applicable, while a longer vortex finder improved particle seeding performance compared to the shorter configuration and the guide vane design. By combining numerical simulations and experiment results, this study demonstrates the feasibility of using the cyclone particle seeder under microgravity conditions, provides key theoretical support for optimizing cyclone seeders, and enables flow field measurements in future microgravity combustion experiments aboard the China Space Station.
A reduced-order framework was developed to describe the outlet initial conditions of a pressure-swirl nozzle under reduced-gravity conditions and to clarify how gravity modifies the nozzle-exit state relative to the corresponding 1 g baseline. Under normal gravity, the baseline outlet state was established through CFD-informed identification of the discharge coefficient and initial spray cone angle, from which the outlet axial and tangential velocity components were reconstructed. Gravity-induced deviations were then introduced through compact correction relationships for the outlet descriptors and liquid-film geometry. The outlet parameters were evaluated over pressure drops of 0.1–0.5 MPa and gravity levels from 1 g to 10−5 g. The results indicate that operating pressure mainly determines the baseline outlet state, whereas reduced gravity acts primarily as a correction to that baseline. Under forward-gravity injection, decreasing gravity reduces the axial and tangential velocity components, discharge coefficient, and initial spray cone angle, while increasing the outlet liquid-film thickness. A CFD-based comparison at 0.3 MPa indicates that the framework captures the first-order trends of normalized outlet velocity components and liquid-film thickness within the investigated conditions. Independent experimental validation is not included in this study and remains necessary for future quantitative assessment.
High-temperature two-dimensional digital image correlation (2D-DIC) can produce spatially unstable strain fields and biased condition-averaged incremental strains, but these error signatures need not respond to the same processing. A smoother strain field is therefore not, by itself, evidence of improved scalar accuracy. We evaluated strain field visualization stability separately from extensometer-referenced, condition-level incremental strain accuracy. An MA956 specimen was tested at 600, 700 and 800 °C under 12 loading conditions spanning 500–2000 µε, with four manually triggered snapshots acquired per condition. The field path used affine registration, pixelwise four-snapshot median fusion and strain radius sensitivity analysis. The scalar path used only the original unfused images and compared four prespecified models under leave-one-temperature-out internal assessment. Increasing the strain radius from 10 to 15 grid points reduced the spatial standard deviation and P95-to-median span by 22.7% and 16.6%, respectively, with little change in scalar RMSE. Controlled simulations with known ground truth showed that local non-affine disturbances primarily increased field dispersion, whereas isotropic scale changes induced approximately common-mode axial and transverse strain drift. Across 20 mechanical strain–magnification conditions, a common-mode-suppressed axial–transverse feature reduced RMSE from 439.7 to 49.8 µε. Guided by this mechanistic evidence, combining the feature with temperature terms yielded the lowest pooled out-of-fold RMSE of 76.27 µε in the experimental data, 69.7% below the raw axial strain baseline. Within the conditions examined, these results demonstrate that improved strain field visualization is insufficient evidence of scalar accuracy and support separate validation of field stability and condition-level incremental strain error.
To address the design and optimization of the ignition system for the microgravity single-droplet combustion experiment module within the Combustion Science Experimental System (CSES) aboard the Chinese Space Station (CSS), it is essential to first determine the ignition temperatures required for typical liquid fuel droplets. In this study, ignition experiments were conducted on droplets of three representative hydrocarbon fuels—ethanol, n-heptane, and n-dodecane—in static air at high temperatures ranging from 760 K to 1100 K. The experimental results show that the initial droplet diameter is inversely correlated with the ambient temperature at which ignition occurs. Subsequently, based on Frank-Kamenetskii’s analytical method and combined with experimental data, a semi-empirical predictive model for droplet ignition temperatures in a normal-gravity environment was derived. Building upon this, and considering the characteristics of the microgravity environment, an appropriate empirical formula was applied to refine the model, resulting in a predictive model for droplet ignition temperatures in the microgravity environment. Furthermore, by comparing the experimental data and the observed phenomena from existing microgravity experiments, this semi-empirical predictive model used in the microgravity environment effectively reflects the trend of droplet ignition temperature variations.