A new model is presented for studying the effects of crack parameters on the dynamics of a cracked beam structure. The model is established by the finite element displacement method. In particular, the stiffness matrix of the cracked beam element is firstly derived by the displacement method, which does not need the flexibility matrix inversion calculation compared with the previous local flexibility approaches based on the force method. Starting with a finite element model of cracked beam element, the equation of strain energy of a cracked beam element is formed by the displacement method combined with the linear fracture mechanics. Then, based on the finite element method, the dynamic model of the cracked beam structure is obtained. The results show that the dynamic model discovers the internal relation between the dynamic characteristics of cracked beam structure and structural parameters, material parameters, and crack parameters. Finally, an example is presented to validate the proposed dynamic model.

Drying involves the evaporation of moisture, accompanied by simultaneous heat transfer, mass transfer, and momentum transfer. While the diffusion law is considered an applicable model for explaining the drying phenomenon, the actual drying process cannot be accurately predicted using an analytical solution with a constant diffusion coefficient. Energy efficiency in the drying process is low due to an insufficient understanding of the mechanisms governing moisture migration from solids to air. The development of drying theory has stalled due to an unsolvable discrepancy between experimental results and analytical results. This study analyzes the effect of the binding energy of moisture in paddy rice on the diffusion coefficient. The theoretical relationship between water activity and drying rate in paddy rice was investigated, and the drying process was successfully explained by analyzing free energy transfer and transition theory. The mechanism of rice grain drying was described using a new theoretical solution for the drying process. These results provide new insights into the development of a scientific evaluation standard for assessing the efficiency of actual drying processes.

Water scarcity poses a significant challenge for people living in arid areas. Despite the effectiveness of many bioinspired surfaces in promoting vapor condensation, their water-harvesting efficiency is insufficient. This is often exacerbated by overheating, which decreases the performance in terms of the micro-droplet concentration and movement on surfaces. In this study, we used a spotted amphiphilic surface to enhance the surfaces’ water-harvesting efficiency while maintaining their heat emissivity. Through hydrophilic particle screening and hydrophobic groove modifying, the coalescence and sliding characteristics of droplets on the amphiphilic surfaces were improved. The incorporation of boron nitride (BN) nanoparticles further enhanced the surfaces’ ability to harvest energy from condensation. To evaluate the water-harvesting performance of these amphiphilic surfaces, we utilized a real-time recording water-harvesting platform to identify microscopic weight changes on the surfaces. Our findings indicated that the inclusion of glass particles in hydrophobic grooves, combined with 1.0 wt.% BN nanoparticles, enhanced the water-harvesting efficiency of the amphiphilic surfaces by more than 20%.

In order to manufacture non-ferromagnetic heterogeneous material by Selective Laser Melting (SLM), it is necessary to solve the separation problem of non-ferromagnetic mixed powders after SLM forming. This research presents how to resolve this problem using TiNi/Ta mixed powders by ultrasonic vibration screening method and the analysis of SLM manufacturing experiment for non-ferromagnetic heterogeneous material. The purity of TiNi and Ta powders after separation could reach 99.7087%wt% and 98.8501wt% respectively, which both reached a relatively high purity. A TiNi alloy sample with Ta coating and TiNi/Ta gradient transition was manufactured successfully by SLM. The material interface of the sample achieves metallurgical bonding, and the color of the sample profile shows a gradient transition. The EDS analysis shows that the material composition changes from Ta ->Ta/TiNi gradient ->TiNi from surface to inside of the sample. The Ta coating contains over 92.5wt% Ta, and the TiNi matrix contains over 98.69wt% TiNi. Along the powder laying direction, it is difficult to clean the small powder near the solid-powder or solid-solid interfaces made of two different materials, which causes micro polluted areas near the interfaces. This study also provides a new method for integrated manufacturing of TiNi alloy part with Ta coating.