An ideal radiative cooler requires accurate spectral control capability to achieve efficient thermal emission in the atmospheric transparency window (8–13 μm), low solar absorption, good stability, scalability, and a simple structure for effective diurnal radiative cooling. Flexible cooling films made from polymer relying on polymer intrinsic absorbance represent a cost-effective solution but lack accuracy in spectral control. Here, we propose and demonstrate a metasurface concept enabled by periodically arranged three-dimensional (3D) trench-like structures in a thin layer of polymer for high-performance radiative cooling. The structured polymer metasurface radiative cooler is manufactured by a roll-to-roll printing method. It exhibits superior spectral breadth and selectivity, which offers outstanding omnidirectional absorption/emission (96.1%) in the atmospheric transparency window, low solar absorption (4.8%), and high stability. Impressive cooling power of 129.8 W m−2 and temperature deduction of 7 °C on a clear sky midday have been achieved, promising broad practical applications in energy saving and passive heat dispersion fields.
There is a growing need for novel methods to modify the surfaces of a wide range of materials over large areas. Here, we demonstrate the creation of low-reflectance () surfaces in the near-to-mid infrared (IR) spectral window of 2–20 m by ablating W, Al, and Cu with high average intensity 20–120 TW/cm2, 200 fs laser pulses at 1030 nm wavelength. The chemical modifications of the surfaces by laser ablation under ambient room conditions were analyzed using X-ray photoelectron spectroscopy (XPS). The results show a consistent decrease in the metallic component, accompanied by an increase in metal oxides. Energy dispersive spectroscopy (EDS) showed a similar increase in oxygen content over a micrometer depth scale. The reduced refractive index of the metal oxides compared to the corresponding metals contributes to the reduction in IR reflectance, combined with the formation of 3D hierarchically textured surface structures. These IR-black metals exhibit great potential for radiative cooling at elevated temperatures relevant to industrial and space applications.
Laser machining by ultra-short (sub-ps) pulses at high intensity offers high precision, high throughput in terms of area or volume per unit time, and flexibility to adapt processing protocols to different materials on the same workpiece. Here, we consider the challenge of optimization for high throughput: how to use the maximum available laser power and larger focal spots for larger ablation volumes by implementing a fast scan. This implies the use of high-intensity pulses approaching ∼PW/cm2 at the threshold where tunneling ionization starts to contribute to overall ionization. A custom laser micromachining setup was developed and built to enable high speed, large-area processing, and easy system reconfiguration for different tasks. The main components include the laser, stages, scanners, control system, and software. Machining of metals such as Cu, Al, or stainless steel and fused silica surfaces at high fluence and high exposure doses at high scan speeds up to 3 m/s were tested for the fluence scaling of ablation volume, which was found to be linear. The largest material removal rate was 10 mm3/min for Cu and 20 mm3/min for Al at the maximum power 80 W (25 J/cm2 per pulse). Modified surfaces are color-classified for their appearance, which is dependent on surface roughness and chemical modification. Such color-coding can be used as a feedback parameter for industrial process control.
A growing demand for complex light manipulation and miniaturization of optics necessitates advanced optical elements, operating on light diffraction phenomena, capable not only of reshaping the intensity distribution but also integrating many optical functions in a compact, durable device. The prevailing fabrication methods for these elements often involve multi-step lithographic processes. In contrast, direct laser ablation offers a single-step, cost-effective, and maskless alternative. However, using solid-state laser systems’ fundamental wavelength (in the IR range) for ablation lacks the precise depth control required for multi-level diffractive optical element fabrication. In this paper, we present the first experimental proof that femtosecond direct laser ablation in the UV spectral range is a reliable method for fabricating diffractive optical elements. We demonstrate the high-quality production of compact photon sieve focusing elements with the shortest focal length ever reported at 9 mm. Furthermore, we report an efficiency of 3.3%, which, to our knowledge, is the highest for elements with such a small focal length and not far from the theoretical efficiency limit of 4.46% (considering perfect cylindrical ablated pits). Moreover, our fabricated elements focus light to a 2.3% smaller focal spot if compared to the refractive lens with the same parameters. This fabrication method shows great promise for advanced applications that require precise depth control in wide band gap materials, such as the fused quartz used in this study.
The reflectance (R) of linear and circular micro-gratings on c-plane sapphire Al2O3 ablated by a femtosecond (fs) laser were spectrally characterised for thermal emission in the mid-to-far infrared (IR) spectral range. An IR camera was used to determine the blackbody radiation temperature from laser-patterned regions, which showed (3–6)% larger emissivity dependent on the grating pattern. The azimuthal emission curve closely followed the Lambertian angular profile at the 7.5–13 μm emission band. The back-side ablation method on transparent substrates was employed to prevent debris formation during energy deposition as it applies a forward pressure of >0.3 GPa to the debris and molten skin layer. The back-side ablation maximises energy deposition at the exit interface where the transition occurs from the high-to-low refractive index. Phononic absorption in the Reststrahlen region 20–30 μm can be tailored with the fs laser inscription of sensor structures/gratings.
Laser machining by ultra-short (sub-ps) pulses at high intensity offers high precision, high throughput in terms of area or volume per unit time, and flexibility to adapt processing protocols to different materials on the same workpiece. Here we consider the challenge of optimization for high throughput: how to use the maximum available laser power and larger focal spots for larger ablation volumes by implementing a fast scan. This implies the use of high-intensity pulses approaching ∼PW/cm2 at the threshold where tunnelling ionization starts to contribute to overall ionization. A custom laser micromachining setup was developed and built to enable high speed, large area processing and easy system reconfiguration for different tasks. The main components include laser, stages, scanners, control system, and software. Machining of metals such as Cu, Al, or stainless steel, and fused silica surfaces at high-fluence and high-exposure doses at high scan speeds up to 3 m/s were tested for the fluence scaling of ablation volume, which was found to be linear. Modified surfaces are color-classified for their appearance, which is dependent on surface roughness and chemical modification. Such colour-coding can be used as a feedback parameter for industrial process control.