Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
There is a growing need for novel methods to modify the surfaces of a wide range of materials over large areas. Here, we demonstrate the creation of low-reflectance () surfaces in the near-to-mid infrared (IR) spectral window of 2–20 m by ablating W, Al, and Cu with high average intensity 20–120 TW/cm2, 200 fs laser pulses at 1030 nm wavelength. The chemical modifications of the surfaces by laser ablation under ambient room conditions were analyzed using X-ray photoelectron spectroscopy (XPS). The results show a consistent decrease in the metallic component, accompanied by an increase in metal oxides. Energy dispersive spectroscopy (EDS) showed a similar increase in oxygen content over a micrometer depth scale. The reduced refractive index of the metal oxides compared to the corresponding metals contributes to the reduction in IR reflectance, combined with the formation of 3D hierarchically textured surface structures. These IR-black metals exhibit great potential for radiative cooling at elevated temperatures relevant to industrial and space applications.
We report on a technique for precise hole drilling in optical fibers using tightly focused femtosecond laser pulses. This direct laser writing approach makes it possible to minimize the amount of waveguide material for uncompromised mechanical performance of the fiber. The proof-of-the-principle of the fiber integration into a microfluidic chip is demonstrated. We show that fabricated holes in the waveguides can be used for measurement of absorption coefficient and refractive index changes at 1x10-3 refractive index units and 2 cm-1 for refractive index and absorption changes, respectively. Simple design and integration possibility of laser-fabricated waveguide sensors is prospective for optofluidic applications.