We present a model predictive control (MPC) algorithm for energy management in aircraft with hybrid electric propulsion systems consisting of gas turbine and electric motor components. Series and parallel configurations are considered. By combining a point-mass aircraft dynamical model with models of electrical losses and losses in the gas turbine, the fuel consumed over a given future flight path is minimized subject to constraints on the battery, electric motor, and gas turbine. The optimization is formulated as a convex problem under mild assumptions and its solution is used to define a predictive energy management control law that takes into account the variation in aircraft mass during flight. We investigate the performance of algorithms for solving this problem. An alternating direction method of multipliers (ADMM) algorithm is proposed and compared with a general purpose convex interior point solver. We also show that the ADMM implementation reduces the required computation time by orders of magnitude in comparison with a general purpose nonlinear programming solver, making it suitable for real-time supervisory energy management control.
The dynamics of an actively controlled fluidic diverter with novel actuation method are presented. This bistable fluidic valve is based on the Coanda effect and is able to switch the main flow solely by means of acoustic excitation. The switching is explained through a combination of experiments and large eddy simulations (LES). The switching time and minimum energy required are characterized for a range of pressure ratios, acoustic excitation frequencies, and input powers. It is shown that the switching mechanism depends on the excitation of natural instabilities inside the free shear layer. An enhanced roll-up of vortices at the excitation frequency increases the rate of entrainment and results in a transverse pressure gradient sufficient to counteract the Coanda effect leading to jet detachment and switching.
This paper studies transition trajectory optimization for a tiltwing electrical vertical takeoff and landing (eVTOL) aircraft configuration and evaluates the benefits of equipping it with fluid injection active flow control (AFC). Using a three-degree-of-freedom model of the aircraft’s longitudinal dynamics, both hover-to-cruise (forward) and cruise-to-hover (backward) transition are investigated for a range of center-of-gravity (CG) positions to determine minimum-energy trajectories that achieve zero altitude variation while avoiding wing aerodynamic stall. It is demonstrated that constant-altitude transition can be achieved in the forward direction (with or without AFC), whereas the use of AFC in backward transition reduces the total altitude change by 24%. A comparative constant-altitude backward transition solution using a different airfoil with a higher stall limit suggests that a redesign of the tail wing of this unique tiltwing aircraft could better leverage the benefits of using AFC in this application. Additionally, it is also shown that, in the case of forward transition, AFC can be used to decrease the total transition time and increase the range of CG positions where constant-altitude transition can occur.
9 September 2022 in International Journal of Hydrogen Energy
The increasing demands for air-taxi operations together with the ambitious targets for reduced environmental impact have driven significant interest in alternative rotorcraft architectures and propulsion systems. The design of hybrid-electric propulsion systems (HEPSs) for rotorcraft is seen as being able to contribute to those goals. This work aims to conduct a comprehensive design and tradeoff analysis of hybrid powerplants for rotorcraft, targeting enhanced payload-range capability and fuel economy. An integrated methodology for the design, performance assessment, and optimal implementation of HEPSs for conceptual rotorcraft has been developed. A multidisciplinary approach is devised comprising models for rotor aerodynamics, flight dynamics, HEPS performance, and weight estimation. All models are validated using experimental or flight test data. The methodology is deployed for the assessment of a hybrid-electric tilt-rotor, modeled after the NASA XV-15. This work targets to provide new insight into the preliminary design and sizing of optimally designed HEPSs for novel tilt-rotor aircraft. The paper demonstrates that at present, current battery energy densities (250 Wh/kg) severely limit the degree of hybridization if a fixed useful payload and range are to be achieved. However, it is also shown that if advancements in battery energy density to 500 Wh/kg are realized, a significant increase in the level of hybridization and hence reduction of fuel burned and carbon output relative to the conventional configuration can be attained. The methodology presented is flexible enough to be applied to alternative rotorcraft configurations and propulsion systems.
17 August 2023 in International Journal of Hydrogen Energy