Yiping Wang

Prof. Yiping Wang


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 May 2013 in Optics Express
Verified
Journal Article
Closed access
PDF file
Yiping WangYiping Wang
Yiping Wang
MWMing Wang
Ming Wang
XHXiaoqin Huang
Xiaoqin Huang
In this paper, a new technique exploiting the polarization properties of normal fiber Bragg grating (FBG) for twist sensing is firstly proposed and experimentally demonstrated. The evolution of the polarization dependent loss (PDL) response of the FBG with respect to the twist is studied. The physical model is presented and a numerical simulation based on the transfer matrix method is used to calculate the PDL spectrum of the twisted FBG. The theoretical and experimental results suggest that the PDL response of the FBG have higher twist sensitivities than that of the reflected or transmitted amplitude spectra. Based on comprehensive analysis of the resonant wavelength and the amplitude of the two main lobes of the PDL spectrum, this sensor can measure twist angle and determine twist direction simultaneously. Moreover, the performance of the sensor is not affected by strain and temperature variations.

9 January 2017 in Optics Express
Verified
Journal Article
Open access
PDF file
Yiping WangYiping Wang
Yiping Wang
XNXiaoqi Ni
Xiaoqi Ni
MWMing Wang
Ming Wang
YCYifeng Cui
Yifeng Cui
QSQingyun Shi
Qingyun Shi
In this paper, a demodulation method for optic fiber micro-electromechanical systems (MEMS) extrinsic Fabry-Perot interferometer (EFPI) pressure sensor exploiting microwave photonics filter technique is firstly proposed and experimentally demonstrated. A single bandpass microwave photonic filter (MPF) which mainly consists of a spectrum-sliced light source, a pressurized optical fiber MEMS EFPI, a phase modulator (PM) and a length of dispersion compensating fiber (DCF) is demonstrated. The frequency response of the filter with respect to the pressure is studied. By detecting the resonance frequency shifts of the MPF, the pressure can be determined. The theoretical and experimental results show that the proposed EFPI pressure demodulation method has a higher resolution and higher speed than traditional methods based on optical spectrum analysis. The sensitivity of the sensor is measured to be as high as 86 MHz/MPa in the range of 0-4Mpa. Moreover, the sensitivity can be easily adjusted.

28 July 2016 in Optics Express
Verified
Journal Article
Open access
PDF file
Yiping WangYiping Wang
Yiping Wang
MWMing Wang
Ming Wang
WXWei Xia
Wei Xia
XNXiaoqi Ni
Xiaoqi Ni
In this paper, a new fiber Bragg grating (FBG) sensor exploiting microwave photonics filter technique for transverse load sensing is firstly proposed and experimentally demonstrated. A two-tap incoherent notch microwave photonics filter (MPF) based on a transverse loaded FBG, a polarization beam splitter (PBS), a tunable delay line (TDL) and a length of dispersion compensating fiber (DCF) is demonstrated. The frequency response of the filter with respect to the transverse load is studied. By detecting the resonance frequency shifts of the notch MPF, the transverse load can be determined. The theoretical and experimental results show that the proposed FBG sensor has a higher resolution than traditional methods based on optical spectrum analysis. The sensitivity of the sensor is measured to be as high as 2.5 MHz/N for a sensing fiber with a length of 18mm. Moreover, the sensitivity can be easily adjusted.

18 September 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
QSQingyun Shi
Qingyun Shi
Yiping WangYiping Wang
Yiping Wang
YCYifeng Cui
Yifeng Cui
WXWei Xia
Wei Xia
DGDongmei Guo
Dongmei Guo
MWMing Wang
Ming Wang
An in-fiber Bragg grating (FBG) sensor for refractive index (RI) measurement is proposed and experimentally demonstrated by using an optoelectronic oscillator (OEO). The index sensor device is an etched phase-shifted fiber Bragg grating (PS-FBG) with a radius of 27.5um. In the OEO loop, the PS-FBG is exposed to different liquid samples via evanescent field interaction of the guided fiber mode. Since the RI change can introduce a shift to the center wavelength of the PS-FBG, the center frequency of the OEO will change. Therefore, the variation of the ambient RI can be estimated by measuring the oscillating frequency change. Since the oscillating microwave signal can be measured by a digital signal processor at a high resolution, the OEO-based sensor is able to provide RI measurement at an ultra-high resolution. The proposed measurement method is experimentally evaluated. The sensor has a sensitivity of 530MHz/RIU and can detect an index variation of 1.9×10-6 RIU.

14 October 2021 in IEEE Photonics Journal
Verified
Journal Article
Open access
XTXiaozhong Tian
Xiaozhong Tian
JSJingzhan Shi
Jingzhan Shi
Yiping WangYiping Wang
Yiping Wang
LLLe Li
Le Li
YSYun She
Yun She
Based on a dual-loop optoelectronic oscillator (OEO) with Vernier effect, a scheme of fiber Bragg grating (FBG) interrogation system with an improved scale factor has been proposed and experimentally demonstrated. Functioning as the optical carrier of the OEO, the reflection signal of two cascaded FBGs is divided into two optical beams by using a wavelength division multiplexer (WDM). The two optical beams at different wavelengths travel along single mode fibers with different lengths. After combined together by another WDM, the two optical beams go through a section of dispersion compensation fiber (DCF). The oscillating frequency shift of the OEO is determined by the overall time delay, which is affected by the wavelength change of the sensing FBG. Thus, the wavelength change of the sensing FBG can be converted into the oscillating frequency shift of the OEO. Furthermore, due to the length difference between the two optical beams, an obvious Vernier effect has been generated in the frequency response of the OEO. By detecting the frequency shift of the envelope peak of the frequency response curve, the sensitivity of the sensing interrogation can be enhanced greatly. A proof-of-concept OEO-based FBG sensor for axial strain sensing experiment is performed. The experimental results show that the sensitivity is about 0.31 KHz/μϵ for a single-loop OEO. By employing Vernier effect, the sensitivity can be improved to -11 KHz/μϵ, which is 35 times higher than that of the single-loop OEO.

5 November 2020 in Optics Express
Verified
Journal Article
Closed access
PDF file
YCYunjie Cheng
Yunjie Cheng
Yiping WangYiping Wang
Yiping Wang
ZSZixuan Song
Zixuan Song
JLJing Lei
Jing Lei
In this paper, a high-sensitivity optical fiber temperature sensor based on a dual-loop optoelectronic oscillator (OEO) with the Vernier effect has been proposed and experimentally demonstrated. Different from the traditional dual-loop OEOs which comprise a very long loop and a short loop to achieve low-phase noise and single-mode selection, the proposed OEO scheme has two loops with slightly different lengths and does not use any RF filters. A part of the fiber in one of the loops is used as a temperature sensing element as well as the delaying component. An obvious Vernier effect has been generated in the frequency response of the OEO. By detecting the frequency shift of the envelope peak of the measured frequency response curve, the temperature sensing interrogation of the dual-loop OEO based sensor is conducted. The experimental results show that the sensitivity of the proposed dual-loop OEO based temperature sensor can be improved from 6.625 KHz/°C for a single-loop OEO to 210.25KHz/°C by employing the Vernier effect.