In this study, a nano-displacement measurement system is proposed and demonstrated both theoretically and experimentally, which was based on a modified Mach-Zehnder (M-Z) interferometer using two conjugated orbital angular momentum (OAM) beams. In contrast to the previous M-Z-based OAM interferometer, a reflection module is inserted into the reference arm instead of a simple mirror. As a result, the effect of the transverse position-dependence phase-shift caused by the dove prism can be clearly eliminated and a stable and robust (off-axis insensitive) petal-like interference pattern can be obtained successfully. More importantly, a significant rotation angle of the petal-like pattern vs. the tiny displacement of the tested object can be clearly observed. In accordance with the modified measurement setup, a novel phase-demodulation method enabling to quickly and accurately characterize the rotation angle of the petal-like interference-patterns is proposed and demonstrated also. A tiny displacement ranging from 50 to 800 nm with resolution of $\sim 50$ pm has been measured successfully. The proposed approach may find applications in not only the ultra-high precision displacement sensor, but also the temperature, strain, and refractive index sensors.
An in-fiber Bragg grating (FBG) sensor for refractive index (RI) measurement is proposed and experimentally demonstrated by using an optoelectronic oscillator (OEO). The index sensor device is an etched phase-shifted fiber Bragg grating (PS-FBG) with a radius of 27.5um. In the OEO loop, the PS-FBG is exposed to different liquid samples via evanescent field interaction of the guided fiber mode. Since the RI change can introduce a shift to the center wavelength of the PS-FBG, the center frequency of the OEO will change. Therefore, the variation of the ambient RI can be estimated by measuring the oscillating frequency change. Since the oscillating microwave signal can be measured by a digital signal processor at a high resolution, the OEO-based sensor is able to provide RI measurement at an ultra-high resolution. The proposed measurement method is experimentally evaluated. The sensor has a sensitivity of 530MHz/RIU and can detect an index variation of 1.9×10-6 RIU.
26 February 2021 in IEEE Photonics Technology Letters
In this letter, we proposed an innovative laser self-mixing interferometer (SMI) with a reflection-type two-dimensional (2D) grating for three-dimensional (3D) dynamic displacement sensing. When the beams emitted by three lasers are incident on a reflective 2D grating with auto-collimation diffraction angles, the diffracted beams will return into the lasers along the original path, thus generating self-mixing interference effect in each laser. In order to obtain higher measurement resolution, phase-modulation technique is applied to the proposed interferometer. The operating principle for the proposed system has been demonstrated in detail. Measurement results show that our method is capable of sensing 3D dynamic displacement with resolution of nanometer level. The SMI presented in this letter has the merits of high resolution, compact system configuration and straightforward operation.
A simple and robust testing system based on laser self-mixing grating interferometer (SMGI) is proposed to determine the sensitivity of accelerometers. Self-mixing grating interference occurs when a laser beam is incident onto a reflective grating at a fixed angle and the 1st order diffracted light returns back into the laser cavity. Frequency ratio method and minimum point method which are officially used to calibrate accelerometers are modified to make it suitable to a SMGI testing system. In order to evaluate the performance of the proposed method, the sensitivity of a commercial MEMS accelerometer was tested at different vibration frequency. The obtained results show good agreement with the sensitivity given by the manufacturer's specification. Given its stability, simplicity and efficiency, the proposed system has the potential to be adopted as an alternative method to test the accelerometers for industrial applications.
In this Letter, a novel multiple self-mixing interferometer for a fiber ring laser (FRL) is designed by introducing a circular feedback cavity. A system model is established based on an injection-seeded erbium-doped FRL proposed by Dragic. Owing to the reflection of the collimating lens, the multiplied fringes have different depths, which shows two Doppler frequencies in the spectrum of the self-mixing signal. A double-peak frequency identification algorithm is proposed to extract the Doppler frequency from the unique signal. This technique has the potential to improve the accuracy of fiber self-mixing measurement systems, particularly in Doppler velocimeters.
29 August 2018 in IEEE Journal of Quantum Electronics
In this paper, a novel self-mixing grating interferometer (SMGI) with dual laser diodes (LDs) is proposed for 2-D dynamic displacement measurement. The light beams emitted from the LDs are incident onto a reflection grating with ±1st order auto-collimation diffraction angles and then diffracted back into the lasers, respectively, which can cause self-mixing interference effect in each LD. Theoretical analysis on the SMGI signals corresponding to 2-D displacement is presented and verified with the experimental observations. Measurement results of 2-D dynamic displacement demonstrate that the proposed system can achieve the measurement resolution better than 10 nm. The proposed SMGI sensing system has the advantages of high stability, compact mechanical structure, and relatively straightforward operation.