The perovskite material system allows for the realization of perovskite/silicon tandem solar cells with high energy conversion efficiencies at low cost. To realize such solar cells, the device geometry, the device processing, and the contact materials have to be modified in comparison to single junction perovskite solar cells. In this study, perovskite/silicon tandem solar cells are designed allowing for the generation of short-circuit current densities and energy conversion efficiencies exceeding 20 mA cm⁻² and 30%, while using realistic device structures. High short-circuit current densities can be achieved by minimizing reflection losses and optical losses of the contact layers. A hybrid approach is used to investigate the optics by combining finite-difference time-domain simulations with experimental measurements. Details on the nanophotonic design will be provided and discussed.

The optical enhancement and losses of microcrystalline thin-film silicon solar cells with periodic pyramid textures were investigated. Using a finite difference time domain algorithm, the optical wave propagation in the solar cell structure was calculated by rigorously solving the Maxwell’s equations. The influence of the profile dimensions (the period and height of the pyramid) and solar cell thickness on the quantum efficiency and short circuit current were analyzed. Furthermore, the influence of the solar cell thickness on the upper limit of the short circuit current was investigated. The numerically simulated short circuit currents were compared to fundamental light trapping limits based on geometric optics. Finally, optical losses in the solar cell were analyzed. After identifying these key losses, strategies for minimizing the losses can be discussed.

Light trapping and photon management of silicon thin film solar cells can be improved by a separate optimization of the front and back contact textures. A separate optimization of the front and back contact textures is investigated by optical simulations taking realistic device geometries into consideration. The optical simulations are confirmed by experimentally realized 1 μm thick microcrystalline silicon solar cells. The different front and back contact textures lead to an enhancement of the short circuit current by 1.2 mA/cm² resulting in a total short circuit current of 23.65 mA/cm² and an energy conversion efficiency of 8.35%.

Plasmonic effects in amorphous silicon thin film solar cells with randomly textured metal back contact were investigated experimentally and numerically. The influence of different metal back contacts with and without ZnO interlayer was studied and losses in the individual layers of the solar cell were quantified. The amorphous silicon thin film solar cells were prepared on randomly textured substrates using large area production equipment and exhibit conversion efficiencies approaching 10%. The optical wave propagation within the solar cells was studied by Finite Difference Time Domain simulations. The quantum efficiency of solar cells with and without ZnO interlayer was simulated and the interplay between the reflection, quantum efficiency and absorption in the back contact will be discussed.

The influence of realistic interface morphologies on light trapping in amorphous silicon thin-film solar cells with periodic surface textures is studied. Realistic interface morphologies are obtained by a 3D surface coverage algorithm using the substrate morphology and layer thicknesses as input parameters. Finite difference time domain optical simulations are used to determine the absorption in the individual layers of the thin-film solar cell. The influence of realistic interface morphologies on light trapping is determined by using solar cells structures with the same front and back contact morphologies as a reference. Finally the optimal surface textures are derived.