Results of an experimental study of temperature fields generated in high-power AlGaInN heterostructure flip-chip light-emitting diodes (LEDs) via their self-heating at high working currents are...
26 December 2018 in Quantitative InfraRed Thermography Journal
For modern high-power LEDs, self-heating becomes a critical factor determining their functional characteristics and lifetime. For large-area LEDs with a complex structure, it is important to know not only the thermal resistance but also the detailed temperature distribution (temperature map) over the active area. We report a technique which can simplify and improve the Infrared (IR) micro-thermography of light-emitting diodes (LEDs) by the use of a special thin-film coating which combines strong absorption in the wavelength range of sensitivity of IR microscope (2.5–3 μm) and transparency in the visible region of the own LED radiation. As known, conventional IR temperature measurements, made on the LEDs, lead to significant difficulties and errors as a consequence of the optical transparency of substrate/heterostructure layers and a low emissivity of metallised contacts. The proposed method allows avoiding the time-consuming procedure of emissivity calibration for different materials forming LEDs while increasing the measurement accuracy.
The current dependences of the power and spectral characteristics, including their distribution (mapping) over the emitting surface, of AlInGaN LEDs of a “vertical” design have been studied in a wide range of operating currents up to ~70 A. It was found that, starting from a certain level of excitation, it is incorrect to use the concept of the average current density when analyzing the efficiency drop. The main factor in reducing the internal quantum efficiency and the radiation output coefficient, which limits the energy capabilities of the LED, is the effect of current crowding to the contacts.
We study recombination processes in nitride LEDs emitting from 270 to 540 nm with EQE ranging from 4% to 70%. We found a significant correlation between the LEDs’ electro-optical properties and the degree of nanomaterial disorder (DND) in quantum wells (QWs) and heterointerfaces. DND depends on the nanoarrangement of domain structure, random alloy fluctuations, and the presence of local regions with disrupted alloy stoichiometry. The decrease in EQE values is attributed to increased DND and excited defect (ED) concentrations, which can exceed those of Shockley–Read–Hall defects. We identify two mechanisms of interaction between EDs and charge carriers that lead to a narrowing or broadening of electroluminescence spectra and increase or decrease EQE, respectively. Both mechanisms involve multiphonon carrier capture and ionization, impacting EQE reduction and efficiency droop. The losses caused by these mechanisms directly affect EQE dependencies on current density and the maximum EQE values for LEDs, regardless of the emission wavelength. Another manifestation of these mechanisms is the reversibility of LED degradation. Recombination processes vary depending on whether QWs are within or outside the space charge region of the p-n junction.
Three main reasons for a temperature increase in activated p-InAsSbP/n-InAs/n-InAsSbP and p-InAsSbP/ n-InAsSb/n-InAs double heterostructures has been considered, contribution of nonradiative Auger recombination, electron-phonon interaction and Joule heating to diode temperature increase in single element LEDs and flip-chip diode arrays (1x3) were evaluated at forward and reverse bias using data on spatial distribution of the mid-IR radiation intensity and current-voltage characteristics. Keywords: IR LED, IR diode array, Joule heating, Auger recombination, electron-phonon interaction.
The object of study in this work was the most advanced AlInGaN LEDs of the "UX : 3" design with a distributed system of reflective contacts located on the back side of the emitting chip. The current dependences of the output optical power and emission spectral characteristics, including their distribution (mapping) over the emitting surface in a wide range of operating currents up to ~ 30 A have been studied. An analysis of the near-field emission by intensity and spectrum revealed a high uniformity of the current density distribution at all levels of excitation (no current crowding). Thus, the saturation of the optical power and the quantum efficiency droop are explained by purely internal factors, which are well described by the ABC model. Keywords: AlInGaN LED, quantum efficiency, emission spectrum, near-field emission.