Chemical Short-Range Order (CSRO) has attracted recent attention from many researchers, creating intense debates about its impact on material properties. The challenges lie in confirming and quantifying CSRO, as its detection proves exceptionally demanding, contributing to conflicting data in the literature regarding its true effects on mechanical properties. Our work uses high-precision calorimetric data to unambiguously prove the existence and, coupled with atomistic simulations, quantify the type of CSRO. This methodology allows us to propose a mechanism for its formation and destruction based on the heat evolution during thermal analysis and facilitates a precise identification of local ordering in CoCrNi alloys. Samples of CoCrNi (Co₃₃Cr₃₃Ni₃₃) and CrNi₂ (Cr₃₃Ni₆₆) alloys are fabricated in varying ordered states, extensively characterized via synchrotron X-ray diffraction, X-ray absorption spectroscopy, and transmission electron microscopy. Samples with considerably different ordered states are submitted to tensile tests with in-situ synchrotron X-ray diffraction. We demonstrate, despite inducing varied CSRO levels in CoCrNi, no significant alterations in overall mechanical behavior emerge. However, the CrNi₂ alloy, which undergoes long-range ordering, experiences significant shifts in yield strength, ultimate tensile stress and ductility.

The iron-containing intermetallic compounds in type 319 aluminium casting alloys were investigated using convergent beam electron diffraction (CBED) and electron backscatter diffraction (EBSD). The Chinese script α-phase was identified as having the cubic Im space group consistent with the Al₁₉Fe₄MnSi₂ phase reported in the literature. However, the atomic ordering of this phase results in complex Kikuchi lines in the CBED and EBSD patterns, which makes phase and orientation identification difficult. In fact, it is shown that the EBSD patterns in the scanning electron microscope and Kikuchi patterns in the transmission electron microscope from this phase are closely related to the structurally similar m icosahedral quasicrystals that form in numerous aluminium–transition metal alloys by both conventional and rapid solidification. The other iron-containing phase in these alloys was determined to be plate shaped and to have the orthorhombic Cmcm space group consistent with the β-Al₅FeSi phase, which has sometimes been confused with having a tetragonal or monoclinic structure. The nature of this structure is such that it frequently grows with a high density of faults that separate equivalent variants; these will be described and related to the previously incorrect interpretations of this being a tetragonal phase.

During a study of the phase stability and decomposition behaviour of the commercial superalloy GTD 111 after many hours in service, it was noted that a lath or plate-like phase precipitated intragranularly. This phase was characterized using electron diffraction and energy dispersive spectroscopy. It was found to be heavily faulted, and consequently, may have been misidentified in previous studies. Due to the faulting, it was necessary to perform extensive selected area diffraction analyses in the transmission electron microscope in order to identify its structure. The analysis was complicated further by the fact that this structure is pseudo-hexagonal such that patterns from certain low and high symmetry zones appear almost identical; careful tilting experiments were used to reveal the structure as orthorhombic. Finally, some discussion of the implications of this particular microstructural feature on the mechanical properties of these alloys is provided based on rejuvenation heat treatments applied to these blades.

Metastable β titanium alloys are developed for biomedical applications due to their low Young’s moduli and functional properties. These alloys can be fitted to different parts of orthopedic implants through thermomechanical processing and chemical composition control. This study aimed to produce, process, and characterize a new metastable β titanium Ti-23.6Nb-5.1Mo-6.7Zr alloy on a semi-industrial scale for orthopedic implant manufacturing, and to discuss the influence of the cold rolling and transformed phases during aging in the microstructure and mechanical properties. This alloy was produced in a vacuum arc remelting furnace (VAR) and thermomechanically processed under different conditions. The samples were characterized by X-ray diffractometry, optical, and scanning electron microscopy, and Young’s modulus (YM) and Vickers Hardness (HV) tests. Among other processing conditions, the sample that was 50% cold rolled after solution treatment, which resulted in a microstructure with β and α″ phases, had the lowest YM (~57 GPa), and the sample aged at 300 °C for 2 h had the highest HV/YM ratio (5.42). The new alloy produced in this work, processed by different routes, showed better mechanical properties than most recently developed metastable Ti-β Alloys.