The goal of this research study is the maximization of the levitation force in a flywheel system by the use of more than one permanent magnet with a single ring-shaped HTS material. An analytical model for the radial stiffness of the ring HTS-PM is derived using the frozen image approach. The experimental works are carried out for different polarizations of the permanent magnets, and radial stiffness values are obtained from the radial force measurements. The rotational test of the flywheel system is also realized for different cases. Finally, natural frequencies of the flywheel superconducting magnetic bearing system are experimentally obtained for different combinations of the permanent magnets using a frequency analyzer.
This research study proposes a new active control structure to suppress vibrations of a small-scale wind turbine blade filled with magnetorheological (MR) fluid and actuated by an electromagnet. The aluminum blade structure is manufactured using the SH3055 (Bergey Windpower Co. Inc., Norman, OK, USA) code numbered airfoil which is designed for use on small wind turbines. A dynamic interaction model between the MR fluid and the electromagnetic actuator is constructed to obtain a force relation. A detailed characterization study is presented for the proposed actuator to understand the nonlinear behavior of the electromagnetic force. A norm based multi-objective H2/H∞ controller is designed using the model of the elastic blade element. The H2/H∞ controller is experimentally implemented under the impact and steady state aerodynamic load conditions. The results of experiments show that the MR fluid- electromagnetic actuator is effective for suppressing vibrations of the blade structure.
The aim of this research is to attenuate the vibrations of a blade structure with an attached piezoelectric actuator using robust multi-objective control. The force obtained from a piezoelectric patch loading has uncertainties due to the complicated shape (airfoil) of the blade element. A parameter-dependent model of the force equation is developed to understand the possible variation range of the actuation force. The modal analysis of the blade is performed to find vibration mode frequencies, and an aerodynamic load is generated experimentally to create steady-state vibration on the blade. A state-space model is obtained by considering certain vibration modes and the parameter-dependent part of the force in the input vector is taken outside of the plant model. The robust stability filter is modified with parameter dependency to have a cluster of the filter. Two different multi-objective controllers are designed with different design objectives. The designed controllers are implemented in experiments and performances of the controllers are compared using frequency and time domain responses. It is shown that the flexible blade vibrations are successfully suppressed with the proposed mixed norm robust controllers under the effect of steady-state aerodynamic disturbance with different air speeds. It is observed in experimental results that the performances of the controller are better than the controller.
20 September 2018 in Journal of Intelligent Material Systems and Structures
This research study proposes a new active control structure to suppress vibrations of a small-scale wind turbine blade with attached magnetorheological fluid patch actuated by an electromagnet. The blade structure is manufactured by an aluminum extrusion machine considering the airfoil data of SH3055 which is designed for use on a small wind turbine. An interaction model between the magnetorheological patch and the electromagnetic actuator is derived and a force characterization is realized. A norm-based multiobjective H2/ H∞ controller is designed using the state-space model of the elastic blade element. The H2/ H∞ controller is experimentally implemented under the steady-state aerodynamic load conditions. The results of experiments show that the magnetorheological layer patch is effective for suppressing vibrations of the blade structure and robust against parametric uncertainty.
6 February 2019 in IET Electric Power Applications
Here, a novel flywheel structure is proposed with passive permanent magnet (PM) bearings in the radial and axial directions and an active magnetic bearing (AMB) in the axial direction. In the proposed structure, passive magnetic bearings do not provide a stable magnetic levitation in all directions, but it is possible to maintain the dynamic stability of the flywheel by using AMB in the axial direction. In the proposed bearing structure, radial repulsive magnetic bearings (RMBs) reduce the power consumption with less complexity in the bearing structure but impose disturbance forces that deteriorate the stability of the actively controlled flywheel system. A complete model of the flywheel system is derived and transformed for a control design. A Lyapunov‐based composite adaptive feedback control is designed for maintaining the stability under disturbances and a close convergence to the desired trajectory with fast parameter estimation. The performance of the composite adaptive control was experimentally verified for different cases using the RMB flywheel system. Additionally, a PID control was experimentally verified to demonstrate the usefulness of parameter estimation.
15 October 2019 in Transactions of the Institute of Measurement and Control
The present study suggests a new active control structure with a switching algorithm for control current of the electromagnetic actuator to suppress vibrations of a flexible blade element containing magnetorheological (MR) fluid. An identification model between MR fluid inside the blade and the electromagnetic actuator is utilized to derive the force equation. Since only one electromagnet is employed to suppress the blade vibration, a single-sided control actuation occurs in the proposed system. Therefore, the pulling force used for vibration control is generated by the actuator when the blade moves to downward direction. A switching linear quadratic Gaussian (LQG) controller that produces always a positive control input is designed to attenuate the blade vibrations. The LQG controller with switching is experimentally implemented under the impact and steady-state aerodynamic disturbances. The results of experiments show that the proposed switching controller is effective to attenuate vibrations of the flexible blade element.