In this paper, two versions of capacitive accelerometers based on low-temperature co-fired ceramic (LTCC) technology are developed, different with respect to the detection technique, as well as the mechanical structure. Fabrication of the key structure, a heavy proof mass with thin beams embedded in a large cavity, which is extremely difficult for the conventional LTCC process, is successfully completed by the optimized process. The LC resonant accelerometer, using coupling resonance frequency sensing which is first applied to LTCC accelerometer and may facilitate application in harsh environments, demonstrates a sensitivity of 375 KHz/g over the full scale range 1 g, with nonlinearity less than 6%, and the telemetry distance is 5 mm. The differential capacitive accelerometer adopting differential capacitive sensing presents a larger full scale range 10 g and lower nonlinearity less than 1%, and the sensitivity is 30.27 mV/g.
2 April 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
3D integration of integrated circuits based on through silicon via (TSV) is a promising technology to achieve high-performance, multifunctional and heterogeneous microsystem. The voltage-dependent and frequency-dependent TSV capacitance has a predominant impact on the system performance. Accordingly, accurate electrical modeling of TSV capacitance is critical for system design. This paper proposes an accurate small-signal analysis method capable of modeling the low-frequency and high-frequency TSV capacitance. The contribution of both fixed carriers and mobile carriers are considered in the model. Moreover, the minority carrier effects are incorporated to accurately model the high-frequency capacitance. The proposed model shows good correlation with measurement and device-level simulation. Analysis and experiment demonstrate neglecting the minority carrier effects lead to huge inaccuracy of TSV capacitance, which can be up to 30.1% in the strong inversion region. Therefore, it is important to consider the minority carrier effects in the modeling of high-frequency TSV capacitance. In addition, the proposed model consumes small computational cost benefit from the efficient iterative procedures.