Hao Qiang

Mr. Hao Qiang

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
SZShengfang Zhang
Shengfang Zhang
HQHao Qiang
Hao Qiang
YLYu Liu
Yu Liu
LJL. Jin
L. Jin
FMF. Ma
F. Ma
DYD. Yang
D. Yang
For the serious and uneven wear of the brake pad in the high‐power disc brake during braking, the dynamic variation of the brake disc and the brake pad interface variable is considered, the wear calculation model is established based on the friction and wear mechanism, and the wear depth and volume of the brake pad can be calculated by equations. A finite element model of the brake disc and the brake pad is established by DEFORM software which can analyze wear of the brake pad directly. The variation trend of wear during braking is studied, and influences of braking load and initial braking speed on the wear are analyzed. The results show that the amount of the wear increases rapidly in the early wear stage of braking, and it becomes slow in the later stage; the wear of the brake pad is serious at the friction inlet and outlet, and the middle area of the brake pad is lightly worn; heavy braking load and high initial braking speed can exacerbate the wear of the brake pad.

23 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZSZhihua Sha
Zhihua Sha
JLJiacheng Lu
Jiacheng Lu
HQHao Qiang
Hao Qiang
JYJian Yin
Jian Yin
YLYu Liu
Yu Liu
SZShengfang Zhang
Shengfang Zhang
For the unique structural characteristics of ventilated brake discs and the complex problem of energy conversion during braking, a calculation method for energy conversion of the ventilated brake disc based on simultaneous heat generation and heat dissipation is proposed. The transient heat transfer model of the ventilated brake disc for high-speed trains is established. Considering the control equations of heat generation–heat dissipation and plate–cylinder convection heat transfer, the virtual simulation of the energy change of the ventilated brake disc during the braking process is carried out. The temperature and stress distribution of contact friction surface and clearance structure of the ventilated brake disc are analysed from the perspective of function conversion. The results show that the heat generated by the ventilated brake disc increases nonlinearly, and the heat dissipated increases linearly. The heat of ventilated brake disc increases with the increase of braking time, but its growth rate decreases continuously. The maximum temperature of the ventilated brake disc is 268 °C, which appears on the friction surface. After braking, its heat is 6.636 × 106 J. The analysis results and methods provide a basis for optimizing the structure of ventilated brake discs.

14 April 2022 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
ZSZhihua Sha
Zhihua Sha
HQHao Qiang
Hao Qiang
JYJian Yin
Jian Yin
FMFujian Ma
Fujian Ma
YLYu Liu
Yu Liu
SZShengfang Zhang
Shengfang Zhang
For the friction and wear of the braking surface of the disc brake, the mechanism of friction contact deformation of rough surface is analyzed. Considering elastoplastic contact mechanics of the friction surfaces, combined with Archard wear calculation theory, a wear calculation model of fractal rough surface is established, and a wear life prediction of the brake disc is proposed. Based on high-speed and heavy-load braking conditions, the influence of different braking parameters on the surface wear of brake disc is studied. Moreover, a pin-on-disc wear test is used to verify the validity of the wear calculation model, and the average relative error of test and simulation is 4.97%. The research results show that the fractal parameters affect the complexity of the rough surface, and surface wear is mainly caused by interface plastic contact. The friction coefficient is large, which can strengthen the surface shear effect. Large load and high speed would increase the real contact area of the surface and increase the wear volume per unit time. Furthermore, the wear life of the brake disc could be estimated, which is of great significance for raising the wear life of the brake disc, improving braking life and braking efficiency.

1 November 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
SZShengfang Zhang
Shengfang Zhang
ZHZhiyu Han
Zhiyu Han
HQHao Qiang
Hao Qiang
YLYu Liu
Yu Liu
ZSZhihua Sha
Zhihua Sha
DYDapeng Yang
Dapeng Yang
The fatigue failure mode of the brake disc is the initiation and expansion of the fatigue crack on the surface of the brake disc until the brake disc brakes. Therefore, considering the fatigue failure mode of the brake disc, the fatigue life of the brake disc is calculated. Firstly, the thermo-mechanical coupling model of the brake disc and pad is established by Abaqus software, so that temperature and stress of the brake disc could be obtained. Then, the surface crack initiation life of the brake disc is calculated by fe-safe software Finally, the fatigue crack growth life of the brake disc is calculated by nCode software. The calculation and analysis results show that the fatigue crack of the brake disc appears on the outer side of the brake disc friction surface under the working condition of this paper. The crack initiation life is that the number of braking is 12830 and the crack propagation life is 695000for the number of braking.

25 January 2023 in Coatings
Verified
Journal Article
Open access
PDF file
HQHao Qiang
Hao Qiang
JYJian Yin
Jian Yin
YLYu Liu
Yu Liu
LJLu Jin
Lu Jin
SZShengfang Zhang
Shengfang Zhang
ZSZhihua Sha
Zhihua Sha
For the wear problem of the real rough surface during sliding friction, based on fractal theory and Hertz contact theory, a 3-D fractal rough surface with random characteristics is constructed, and the relationship between the wear deformation depth of the rough peak and its real contact area during the wear process is derived. Furthermore, considering the peak wear and pit scratch phenomena of rough surfaces in different contact states, the time-varying wear calculation model of the worn surface and the compensation wear calculation model of the unworn surface are established, respectively, and the relationship between the instantaneous wear amount and the dynamic change in the rough surface topography is comprehensively characterized. Combined with image digitization technology, the 3-D rough surface is converted into a 2-D discrete plane with 3-D information. According to the dynamic real-time update of the graph data, the iterative calculation of the wear cycle is completed, the time-varying wear calculation method for fractal rough surfaces of friction pairs is proposed, and the dynamic change in the wear amount and surface topography of the rough surface is simulated. The simulation results are experimentally verified and the influence of friction parameters on the surface topography is analyzed. The results show that after the wear simulation, the profile height of the rough surface is reduced, and the average wear depth is 0.02 mm. Increases in rotational speeds and external loads can exacerbate surface wear, surface topography tends to be flattened, and surface carrying capacity increases. This provides theoretical guidance for the development and manufacture of friction pairs.

4 January 2022 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
JYJian Yin
Jian Yin
HQHao Qiang
Hao Qiang
YLYu Liu
Yu Liu
SZShengfang Zhang
Shengfang Zhang
ZSZhihua Sha
Zhihua Sha
The brake disc plays a crucial role to keep the stable braking of a high-speed and heavy-duty disc brake. There is always high temperature, brake vibration, and even serious deformation under braking pressure and frictional resistance. To improve brake performance, this paper aims to find new internal and surface structures of the brake disc. An equivalent moving load (EML) topology optimization method for internal structure is proposed. Topography optimization method oriented to displacement and stress control for surface structure is carried out. Multiobjective functions containing thermal-structural coupled rigidity and natural frequency of the brake disc are established in the internal and surface structure optimizations. Internal and surface structures of the brake disc are optimized, and the mechanic properties of the brake disc are improved. Thermal-structural coupling and modal analyses are verified with high-speed and heavy-duty brake working conditions. The results show that new brake disc structures meet the requirements, and the effectiveness of the proposed EML topology optimization and topography optimization methods has been proved.