Jun Li

Dr. Jun Li


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2015 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
DFDeng Feng
Deng Feng
JHJunjia He
Junjia He
SXShengguo Xia
Shengguo Xia
LCLixue Chen
Lixue Chen
LTLiangliang Tang
Liangliang Tang
PYPing Yan
Ping Yan
In the process of electromagnetic launch, the nonuniform contact pressure distribution on the armature-rail interface kept changing with the armature moving forward. At first, the contact pressure was mainly provided by the deformation of the trailing arm, from which it could keep a good metal-metal contact at the armature-rail interface. After the pulse current was constructed, the magnetic pressure would dominate the contact pressure because it was much larger than the mechanical interference pressure. In this paper, the 3-D modeling of contact pressure distribution was carried out with the finite-element method. In the simulation of 3-D contact calculations, the current entered the armature from the trailing edge. The electromagnetic force perpendicular to the armature trailing arm was equivalent to the uniform load on the inner surface of the trailing arm. A typical contour pattern of nonuniform contact pressure distribution was acquired. Some nonuniform coefficients of contact pressure distribution were proposed and analyzed to evaluate the contact performances between the armature and rails. A series of simulations was conducted at different magnitudes of magnetic pressure, and with different armature structure parameters. The characteristics of the nonuniform coefficients were investigated and discussed. The dependences of the nonuniform coefficients on the equivalent uniform load and armature structure parameters were obtained.

10 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
NXNan Xiao
Nan Xiao
JLJun Li
Jun Li
PYPing Yan
Ping Yan
Launcher efficiency is an important index for evaluating the performance of the electromagnetic launcher, and it reflects the ability of the launcher to convert input electrical energy into kinetic energy of the armature. In this paper, the launcher efficiency is taken as the objective function of bore parameter optimization, and particle swarm optimization is used to optimize the initial parameters of the BP neural network to improve the accuracy of the neural network in predicting launcher efficiency. The results show the following: (1) The predicted efficiency of the launcher shows the same trend as the experimental results. When the ratio of rail separation and rail height is greater than 1.75, the rate of change in the launcher efficiency curve decreases as the rail separation increases. (2) The weight of the influence of each parameter on the launcher efficiency follows the following law: convex arc height > rail separation > rail height > rail thickness. (3) The mean absolute error of the BP neural network prediction is 0.70%; after optimization by PSO, the mean absolute error is reduced to 0.28% and the mean relative accuracy is improved from 0.9774 to 0.9910, which indicates the feasibility of the PSO-BP neural network for the prediction of the launcher efficiency of an electromagnetic launcher.


2 August 2024 in Energies
Verified
Journal Article
Open access
PDF file
NXNan Xiao
Nan Xiao
JLJun Li
Jun Li
PYPing Yan
Ping Yan
WTWen Tian
Wen Tian
The electromagnetic rail launcher has the advantages of high muzzle velocity, long-range and controllability and has received extensive attention from researchers in various countries. The launcher efficiency reflects the ability of the launcher to convert electrical energy into kinetic energy of the load and is an important parameter of the electromagnetic rail launcher, which includes the launcher effective efficiency and launcher ineffective efficiency. The bore parameters and the effective mass ratio are important factors for the launcher efficiency. Finite element simulations and experiments were carried out to study the effects of rail separation, the convex arc height and the effective mass ratio on the launcher effective efficiency. Three conclusions were obtained. (1) The launcher effective efficiency increased with the growth of the effective mass ratio, the launcher effective efficiency rose from 7.91% to 17.17% when the effective mass ratio was in the range of 0.28~0.56, and the average value of the improvement in the launcher effective efficiency under different conditions of bore parameters is 8.24%. (2) The launcher effective efficiency rose with the increment in the rail separation. As the rail separation increased from 14 mm to 16 mm, the launcher effective efficiency improved by an average of 0.70%, and the increment in the launcher effective efficiency decreased with the growth of rail separation. (3) The launcher effective efficiency increased with the growth in the convex arc height. As the convex arc height rose from 0 mm to 1 mm, the launcher effective efficiency improved by 0.77% on average. Moreover, the muzzle velocity and the acceleration process of the armature in the bore were calculated. The conclusions were the same as the conclusions of the experiments.